• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.529-535
• /
• 2007

The nutritive values of leaves of Citrus grandis, Citrus aurantium, Citrus oranges, Citrus limon, and Citrus deliciosa were evaluated by chemical composition and in vitro gas production techniques. There were significant (p<0.001) differences among citrus species in terms of chemical composition. Crude protein (CP) contents ranged from 123.0 to 148.3 g/kg DM. Neutral detergent fibre (NDF) and acid detergent fibre (ADF) contents were varied with species in the range 219.4-355.4 and 215.0-278.8 g/kg DM respectively. Condensed tannin (CT) contents were ranged from 5.9 to 10.2 g/kg DM. The PEG addition significantly (p<0.001) increased the gas production and some estimated parameters of citrus tree leaves. However, species showed variable responses to polyethylene glycol (PEG) treatment. There were also significant (p<0.001) differences among species in terms of gas production and estimated parameters. The OMD and ME contents of citrus leaves without PEG supplementation were ranged from 66.5 to 73.3% and 9.8 to 10.9 MJ/kg DM respectively. The improvement in gas production, organic matter digestibility (OMD) and metabolizable energy (ME) with PEG emphasized the negative effect of tannins on digestibility. The increase (%) in the estimated OMD and ME contents ranged from 5.5 to 9.8% and 5.7 to 10.2% respectively. All citrus tree leaves studied in this experiment have potential nutritive values indicated by high crude protein content, OMD, ME and low fiber values.

• Composites Research
• /
• v.15 no.1
• /
• pp.53-60
• /
• 2002

Composite ablative tubes required capabilities of ablative and structural characteristics were fabricated through filament winding technique and several experiments were conducted to evaluate the structural performance of composite ablative tubes. For this purpose, manufacturing procedures were briefly described and then resin digestion method was applied to measure the fiber volume fraction and the void content of composite ablative tubes. The configuration of tensile specimen fur composite ablative tubes with not losing the continuity of reinforced fibers was suggested by evaluating mechanical properties of several types of the specimen with different widths. Also, suitable processing variables for composite ablative tubes were determined by evaluating mechanical properties of several types of the specimen with different processing variables. In addition, acoustic emission signals were obtained during the proof test and could be applicable to study the crack initiation and the damage mode of composite ablative tubes. Finally, the structural reliability of composite ablative tubes could be verified to satisfy design requirements through the proof and burst tests.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1144-1148
• /
• 2001

The implications of incorporating deoiled rice bran (DORB) in diet on the utilization of certain nutrients had been examined through balance studies made with 6- and 10- week-old Japanese quails. The stuffs evaluated in this study had their origin from two different types of processes- a batch extraction (DORB-B) and another continuous process (DORB-C), and each included at 10, 20 or 30% level in an iso-nitrogenous and iso-caloric diet. On chemical analyses, the DORB-B was found to contain crude protein, 19.0; ether extract, 0.79; total ash, 17.05; Ca, 0.11; P, 1.92; glucose, 2.35 and starch 11.22 g/100 g day matter. Corresponding values for DORB-C were 15.02, 1.56, 13.0, 0.40, 2.76, 2.16 and 19.0, respectively. The data on nutrient balances with quails fed diets containing the two-types of DORB suggested no significant (p>0.05) differences in per cent retention of diet dry matter (DM), organic matter (OM), ether extract (EE), gross energy (GE), nitrogen (N), crude fiber (CF), calcium (Ca) or phosphorus (P) content attributable to the extraction process. The age of the birds also appeared to have no significant (p>0.05) effect on nutrient utilization by them. However, the level of inclusion of DORB had a significant (p<0.05) effect on nutrient utilization by quails in that the retention of dietary N, EE, CF, Ca and P was better at lower than at higher levels. It is concluded that the DORB, irrespective of extraction process, can safely be employed upto 20% level in diet of adult Japanese quails without noticeable interference in utilizing the major dietary nutrients.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.5 no.1
• /
• pp.75-80
• /
• 1976

The development of protein utilization with keratin(cattle hair and human hair) have heen investigated. The include a) conditioning of hydrolysis of keratin, b) isolation of crude protein, c) pepsin HCl digestibility of isolated protein, d) the amino acid composition of isolated protein and amino acid concentrate. The results are obtained as follow ; 1. Human hair and cattle hair were softened and hydrolysed with hot dilute alkali(especially 1% NaOH) 2. Crude protein were isolated from hydrolysed keratin by means of different solubility and isoelectric point. 3. The protein isolated was of good quality on the point of color, protein content and pepsin digestibility. 4. The amino acid concentrate obtained by acids processing was of good quality on the point of color, taste and amino acid composition.

• Journal of Nutrition and Health
• /
• v.12 no.3
• /
• pp.9-23
• /
• 1979

The known risk factors for atherosclerosis include plasma low density lipoproteins (LDL)or Cholesterol, low PUFA in the diet, hypertension, and high Na intake, obesity, diabetes, lack of exercise, cigarette smoking, sugar, low fiber and nicotinic acid in the diet, sources of Protein foods, and Psychological factors. Among various dietary factors, fat is known as the most serious causative agent for atherosclerosis. The genetic factor is a18o known as an important one but is out of scope in this paper. Since atherosclerosis is a progressive disease which may develop for many years before showing any definitive symptoms, it is very important to develop preventive programs especially in the country like Korea that is not quite overdevelopted as some western countries. In this paper all the factors mentioned above were reviewed and the dietary suggestion were made on the basis of the content of polyunsaturated and saturated fat in the diet to prevent or/and to cure this disease. Most of the available data on diet therapy with emphasis. on P/S ratio were tabulated together. after tile patient's habitual dietary intake is analized the guidelines of personalized fat-controlled diet can be recommended. It is of utmost importance to develop Korean diets for beth prevention and cure of atherosclerosis emphasizing individual eating habit in the near future which can be more Practicaly used both at home and in the hospital.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.377-381
• /
• 2005

The using of composite material is an aviation field but it changes into a general industry. Especially composites are expanding the use on transportation vehicles like automobiles, ships, and aircraft. The main factor of this expansion is high specific strength. It can supply a high quality and efficiency of energy. But manufacturing of composite products requires many raw materials and tooling cost for special process, so we needs a reduction of these costs to achieve best efficiency. In the present study, we contrast the change of mechanical and physical properties between VaRTM(Vacuum Assisted Resin Transfer Molding) and hand lay-up process. VaRTM process can offer a high quality the same as autoclave products, and low cost like hand lay-up process. In the results of mechanical tests, VaRTM specimen is stronger than hand lay-up specimen and hand lay-up specimen became delamination. In the results of physical tests, the resin content of VaRTM specimen is lower than hand lay-up specimen. On micrograph, the strength of specimen by VaRTM between fiber and resin is stronger than that of one by hand lay-up. And the specimen by hand lay-up contains more defects than one by VaRTM. So, VaRTM process can practically apply for automobile engine hood. This paper shows that VaRTM process is one of the most suitable processes for composite parts of automobile.

• Conservation Science in Museum
• /
• v.16
• /
• pp.32-45
• /
• 2015

The bronze incense burner, discovered in Chungung-dong, Hanam, Gyeonggi-do in 1971, is a hanging incense burner dating from the Goryeo period. The incense burner was covered with a thick layer of clay. The object was in a severely deteriorated state, affected by bronze disease which resulted in extensive corrosion. Numerous cracks were present across its surface, and some parts had been broken off. To preserve and display the bronze incense burner in a stable condition, deposits of foreign material were removed from the surface, and the weakened metal was strengthened. Cracked and broken areas were reinforced using woven glass fiber, followed by the application of epoxy resin to restore the shape. To investigate the method of production, a chemical analysis was performed, and the microstructure was examined. The chemical analysis revealed that the body of the incense burner as well as the ear, loop, lid and the knob were cast in a ternary alloy of Cu-Sn-Pb. Moreover, copper nails with high copper content were used to securely join the ear to the body of the incense burner. The microstructure was mainly α-phase, and non-intermetallic inclusions composed of Cu and S were detected.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.90-94
• /
• 2006

An electrospinning process was used to fabricate poly(methyl methacrylate) (PMMA) nanofibers embedding multi-walled carbon nanotubes(MWNTs). SEM images showed that the nanofiber surface and structural morphology depended on solvent types (dimethyl formamide, chlor-form and toluene) and carbon nanotube contents (0.5 and $3.0\;wt\%$). Nano-fiber alignments could be controlled by adjusting the electrodes configuration at collector sites. Relationship between carbon nanotube and PMMA nanofiber was studied with radius of gyration of polymer chain and carbon nanotube sizes. As the carbon nanotube content ratio increased, the number of bead increased.

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.90-96
• /
• 2016

Snake tomato (Trichosanthes cucumerina) has been cultivated and used as a replacement for Lycopersicum esculentum in many Asian and African diets. Matured T. cucumerina fruits were harvested at different ripening stages and separated into coats and pulps for analyses to determine their suitability for use in culinary. They were analyzed for the nutritional composition and antioxidant potential using different biochemical assays [1,1-diphenyl-2-picrylhydrazyl, 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activities, and ferric reducing antioxidant power] and antioxidative enzymes activities. The nutritional composition revealed that T. cucumerina contains over 80% water and is very rich in fiber, thus it can serve as a good natural laxative. The lycopene and ${\beta}$-carotene contents were especially high in the ripe pulp with values of $21.62{\pm}1.22$ and $3.96{\pm}0.14mg$/100 g, respectively. The ascorbic acid content was highest in the pulp of unripe fruit with a value of $56.58{\pm}1.08mg$/100 g and significantly (P<0.05) decreased as ripening progressed. The antioxidant potential of the fruits for the 3 assays showed that unripe pulp> ripe coat> ripe pulp> unripe coat. There were decreases in the antioxidant enzymes (superoxide dismutase, ascorbate peroxidase, and glutathione reductase) activities, with the exception of catalase, as ripening progressed in the fruits. These decreased activities may lead to the softening of the fruit during ripening. Harnessing the antioxidative potential of T. cucumerina in culinary through consumption of the coats and pulps will alleviate food insecurity and help maintain good health among many dwellers in sub-Saharan Africa and Southeast Asia.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.11-16
• /
• 2002

Analysis and separation of constituent materials of old car have been performed by using the industrial shredding line. For this aim, three old cars made by domestic automobile manufacturers, Sonata II, Sephia and Prince were chosen and delivered in pressed form without engine, tires and doors, etc. Shredding line was substantially composed of pre- and main-shredder. cyclone, magnetic separation, eddy current separation and man-power separation. From the separation of shredder products, iron scrap was observed to be the major material of old car accounting for 60.1 ％ of total weight and non-ferrous metals involving Al, Cu and Zn, etc. were about 2％. Light fluff, about 90％ of total fluff product, was comprised with plastic, fiber and sponge, etc. and the fraction of 5 cm undersize in light fluff was 70.5%. In case of heavy fluff, however. rubber and plastic were found to be the major constituent materials of it. Among the constituent materials of fluff, plastic showed the highest calorific value, more than 10,000 cal/gr and leather and rubber showed relatively high chlorine content, 10.3 and 2.55 wt%, respectively.