• Composites Research
• /
• 제13권6호
• /
• pp.63-72
• /
• 2000

본 논문에서는 평직복합재료의 섬유다발의 배열 및 적층수가 등가물성치에 미치는 영향을 연구하였다. 임의로 적층된 2~32장의 평직복합재료 구조물의 단위구조를 모델링 하였고, 단위구조의 외부 경계 면에는 반복 경계조건을 가하였다. 등가물성치는 일축 인장시험 및 전단시험을 수치적으로 모사하여 계산하였고, 섬유다발 위상차의 무작위적 특성은 표본해석을 통해 고려하였다. 계산 된 등가물성치의 통계처리 결과, 두께가 얇은 평직복합재료의 $E_{xx}$와 $V_{xy}$는 위상차의 영향을 크게 받았고, 넓은 빈도분포를 보였다. 그러나 적층수가 증가함에 따라 분포의 폭은 감소하였고 평균값은 일정한 값으로 수렴하였다. 반면에, 섬유다발의 면내 방향으로의 이동 및 적층수의 변화는 $G_{xy}$에 거의 영향을 미치지 않는 것으로 나타났다.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.134-140
• /
• 2017

CFRP has many industrial applications due to its low weight and high strength properties. CFRP is a composite material composed of carbon fibers embedded in a polymer matrix; it provides excellent resistance to fatigue wear, corrosion, and breakage due to fatigue. It is increasingly demanded in aircraft, automotive, and medical industries due to its superior properties to aluminum alloys, which were once considered the most suitable for specific applications. The basic machining methods of CFRP are drilling and route milling. However, in the case of drilling, the delamination of each layer, uncut fiber, resin burning, spalling, and exit burrs are barriers to successful application. This paper investigates the occurrence of exit burrs when drilling holes with ultrasonic vibration. Depending on design parameters such as the point angle, the characteristics of hole drilling were identified and appropriate machining conditions were considered.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.234-238
• /
• 2008

The efficiency of fiber reinforced CMC(ceramic matrix composite) on the SiC materials have been investigated, in conjunction with the fabrication process by liquid phase sintering and the characterization. LPS-$SiC_f$/SiC composites was studied with the detailed analysis such as the microstructure, sintered density, flexural strength and fracture behavior. The applicability of carbon interfacial layer has been also investigated in the LPS process. Submicron SiC powder with the constant total amount and composition ratio of $Al_2O_3,\;Y_2O_3$ as sintering additives was used in order to promote the performance of the SiC matrix material. LPS-$SiC_f$/SiC composites were fabricated with hot press under the sintering temperature and applied pressure of $1820^{\circ}C$ and 20MPa for 1hr. The typical property of monolithic LPS-SiC materials was compared with LPS-$SiC_f$/SiC composites.

• 한국음향학회지
• /
• 제11권4호
• /
• pp.22-30
• /
• 1992

섬유강화 복합재료의 동탄성계수와 감쇠특성을 규명하기 위하여 랜덤하게 분포된 무한 실린더 형상의 산란계를 가진 메질내에서, 축방향으로 분극되어 조화운동을 하는 탄성파의 전파에 관하여 연구하였다. 단일 실린더에 대한 산란계수로부터 Lax의 준결정근사법을 이용하여 다중산란에 관한 이론을 유도하였고, 매질내에서의 파동전파특성을 내포하는 분산관계식을 얻었다. 다중 산란에 의한 실린더간의 상호작용을 수식화하기 위하여 필요한 실린더의 쌍분포함수는 몬테카를로 모의실험을 이용하여 구하였다. 수치적으로 구한 감쇠계수 및 유효전단강성을 주파수와 면적밀도의 함수로 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.26-36
• /
• 2001

Smart sensors and actuators have recently been developed. In this study, first, small-diameter fiber Bragg grating (FBG) sensors developed by the author, whose cladding and polyimide coating diameters were 40 and $52{\mu}m$, respectively, were embedded inside a laminate without resin-rich regions around sensors and the deterioration of mechanical properties of the composite laminate. The small-diameter FBG sensor was embedded in $0^{\circ}$ ply of a CFRP laminate for the detection of transverse cracks in $90^{\circ}$ ply of the laminate. The reflection spectra from the FBG sensor were measured at various tensile stresses. The spectrum became broad and had some peaks with an increase of the transverse crack density. Furthermore, the theoretical calculation reproduced the change in the spectrum very well. These results show that the small-diameter FBG sensors have a potential to detect the occurrence of transverse cracks through the change in the form of the spectrum, and to evaluate the transverse crack density quantitatively by the spectrum width. On the other hand, shape memory alloy (SMA) films were used to suppress the initiation and growth of transverse cracks in CFRP laminates. Pre-strained SMA films were embedded between laminas in CFRP laminates and then heated to introduce the recovery stress in SMA films and compressive stresses in the weakest plies ($90^{\circ}$ ply). The effects of recovery stresses are demonstrated in the experiments and well predicted using the shear-lag analysis and the nonlinear constitutive equation of SMA films.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.32-38
• /
• 2018

In this study, the one-piece propeller shaft composed of carbon/epoxy was designed and manufactured for 4 wheel drive automobiles that can bear the target torsional torque performance of 3.5kN.m. For the CFRP tube, braiding machine was used to weaving carbon fiber and it was formed the braided yarns with the braid angle ${\pm}45^{\circ}$ and axial yarns to improve strength of the lengthwise direction. The final CFRP tube of propeller shaft was evaluated through the torsional torque test. The CFRP propeller shaft satisfied requirement of the target torsional maximum torque of 3.5kN.m. Also, it was found that the one-piece composite propeller shaft with CFRP tube had 30% weight saving effect compared with a two-piece steel propeller shaft.

• 폴리머
• /
• 제26권2호
• /
• pp.270-278
• /
• 2002

저밀도 2-D 탄소/탄소 복합재료의 저속 충격에 의한 파괴 거동과 첨가제에 따른 충격 에너지 흡수 경향을 연구하였다. 저속 충격시험은 mini tower 낙추 충격 시험기를 이용하였으며, 흑연, 카본블랙, 분쇄탄소섬유를 첨가제로 선택하였다. 흑연의 첨가는 최대하중값을 증가시켰으며, 전체적인 관통이 일어나기까지 응력을 오랫동안 유지시키는 효과를 나타내었다. 특히 9 vol%의 함량에서 흑연이 첨가되지 않은 씨편보다 약 42%의 충격 흡수 개선을 보였다. 약 0.4 J의 낮은 충격에너지에 의한 충격 회수에 따른 실험에서 첨가제가 첨가되지 않은 시편의 경우, 충격에너지는 층간분리에 의해 소모되고, 흑연의 함량이 증가함에 따라 파괴 경향은 시편의 관통으로 변화함을 관찰할 수 있었다.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.865-870
• /
• 2012

CFRP of the advanced composite materials as structure materials for vehicles has a widely application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness compared with conventional materials. This study is to investigate the energy absorption characteristics and collapse mode of CFRP single and double hat shaped structural member under the axial static collapse test. The CFRP single and double hat shaped structural members stacked at different angles (${\pm}15^{\circ}$, ${\pm}45^{\circ}$, ${\pm}90^{\circ}$, $90^{\circ}/0^{\circ}$ and $0^{\circ}/90^{\circ}$ where the direction on $0^{\circ}$ coincides with the axis of the member). The axial static collapse tests were carried out for each member. Collapse mode and energy absorption characteristics of the each member were analyzed.

• 대한기계학회논문집A
• /
• 제38권5호
• /
• pp.527-534
• /
• 2014

본 논문에서는 이미지 기반 전산 모형을 이용하여 섬유강화 복합재료의 기공 탄성 해석을 수행하였다. 먼저 다공성 기지에 대한 단면 이미지를 분석하여 기공도, 기공 개수, 기공 분포 등을 확인하였다. 이미지의 해상도, 위치, 크기에 따른 전산 모형화 및 유한요소 해석을 수행하였으며, 주요 결과로써 유효 탄성 계수, 기공 탄성 인자, 변형 에너지 밀도를 정량적으로 산출하였다. 기공 탄성 인자는 유효 탄성 계수와 기공 압력에 의한 팽창 변형도를 기준으로 계산하였다. 또한 이미지 기반 전산 모형을 이용한 기공 탄성 해석 결과의 신뢰성 확인을 위해, 기공의 형상 및 배열을 단순화시킨 대표 체적 요소 모형의 해석 결과와 비교하였다.

• 한국의류학회지
• /
• 제41권4호
• /
• pp.771-781
• /
• 2017

The helmet is an imperative personal protective equipment. This protective device must be able to guard the human head against potential risks. Helmets are classified according into the purpose of use; therefore, the required performance and specifications depend on the type of products. Military helmets are intended to protect the wearer's head from bullets and shrapnel. Generally, lightweight super fibers and fiber reinforced composite materials are used as helmet shell materials, and NIJ STD of U.S. Department of Justice is most widely used as international standard related to bulletproof helmets. Safety helmets are widely used for industrial application and sports leisure. In general, the performance of shock absorption must be ensured, and various lining systems are applied in material, design, and combination methods. Evaluation standards have also been classified and strictly controlled for each purpose; therefore, it is difficult to certify with the existing standards such as the recently developed convergence helmets. However, it is possible to launch the product through a separate national integrated certification procedure.