• 한국생활과학회지
• /
• 제20권2호
• /
• pp.413-426
• /
• 2011

This research was designed to compare the subjective evaluation of texture image and preference according to fiber blending ratio of men's suit fabrics. 110 subjects evaluated the texture image and preference of various fabrics. For statistical analysis, factor analysis, MDS, pearson correlation and ANOVA were used. The results were as follows: Sensory image factors of suit fabrics were 'smoothness', 'bulkiness', 'stiffness', 'elasticity', 'moistness' and 'weight sensation'. Sensibility image factors were 'classic', 'practical', 'characteristic' and 'sophisticated'. 'Bulkiness' and 'elasticity' sensory images showed high correlations with sensibility images. Fabrics with high wool blending ratio showed as 'classic' and 'sophisticated', 'bulkiness' and 'elasticity' texture images and fabrics with low wool blending ratio showed texture images of 'characteristic', 'surface character', 'stiffness', 'moistness' and 'weight sensation'. Wool fiber blending ratio affected on the purchase preference and tactile preference. Using regression analysis, it was shown that sensibility images had more of an effect on preference than sensory images. The thickness and pattern type showed positive effects and fiber blending ratio showed negative effects on the preference.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.345-348
• /
• 2004

In this study, an effect of fiber blending on material property of hybrid fiber reinforced concrete (HFRC) was evaluated. Also, optimized association and the mixing rate of fiber for HFRC was determined. Test result shows, in the case of mono fiber reinforced concrete, use of steel fiber in concrete caused increment in tensile and bending strength as the blended ratio increases, while use of carbon fiber and glass fiber caused increment in compressive strength. Use of hybrid fiber reinforcement in concrete caused a significant influence on its fracture behavior; consequently, caused increase by mixing rate of steel fiber and contributed by carbon fiber, glass fiber, celluloid fiber in reinforcement effect in order.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.147-148
• /
• 2017

In this study, the tensile properties of mono and hybrid fiber reinforced cement-based composite according to fiber blending ratio under the high strain rate was evaluated. Experimental results, the HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. Also, the fracture toughness was greatly improved because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate 101/s.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.31-39
• /
• 2021

본 연구에서는 후크형 강섬유(HSF)와 스무스형 섬유(SSF)의 혼합 비율과 변형속도가 하이브리드 섬유보강 시멘트복합체의 인장 특성 시너지 효과에 미치는 영향을 평가하기 위하여, HSF와 SSF를 각각 1.5+0.5, 1.0+1.0, 0.5+1.0vol.%의 혼합 비율로 혼입한 하이브리드 섬유보강 시멘트복합체를 제작하였다. 실험 결과, HSF를 보강한 시멘트복합체(HSF2.0)은 변형속도가 증가함에 따라 섬유 주변 매트릭스에 발생하는 마이크로 균열의 증가에 의해 직선형으로 인발되는 섬유의 수가 감소하고, 인장강도 점 이후 응력 저하가 급격하게 발생하였다. SSF가 0.5vol.% 혼입되는 경우, 준정적에서 마이크로 균열을 효과적으로 제어하지만, 고속에서는 마이크로 균열 제어 및 후크형 강섬유의 인발저항성능 향상에 효과적이지 않은 것으로 확인되었다. 반면, HSF 1.0vol.%와 SSF 1.0vol.%를 혼입한 시험체(HSF1.0SSF1.0)은 마이크로 및 매크로 균열에 대해 각각의 섬유가 효과적으로 제어하고, SSF가 HSF의 인발저항성능을 향상시킴으로써 고속에서 변형능력 및 에너지 흡수 능력에 대한 섬유 혼합 효과가 크게 증가하였으며, 인장강도, 변형능력 및 피크인성의 변형속도 민감도가 가장 높은 것으로 나타났다. 반면, SSF 1.5vol.%의 혼입은 매트릭스 내의 섬유 혼입 개체 수를 증가시키고, HSF의 인발저항성능을 향상시켜 가장 높은 인장강도 및 연화인성 시너지 효과를 나타내었지만, 매크로 균열을 제어하는 HSF의 혼입률이 0.5vol.%로 낮아 변형능력 및 피크인성 시너지에는 효과적이지 않은 것으로 확인되었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2000년도 봄 한국섬유공학회 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.105-108
• /
• 2000

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.13-18
• /
• 2005

PLA/LPCL/HPCL blend fibers composed of poly (lactic acid) (PLA), low molecular weight poly ($\varepsilon$-caprolactone) (LPCL), and high molecular weight poly ($\varepsilon$-caprolactone) (HPCL) were prepared by melt blending and spinning for bioab­sorbable filament sutures. The effects of blending time and blend composition on the X-ray diffraction patterns and tensile properties of PLA/LPCL/HPCL blend fibers were characterized by WAXD and UTM. In addition, the effect of in vitro degra­dation on the weight loss and tensile properties of the blend fibers hydrolyzed during immersion in a phosphate buffer solu­tion at pH 7.4 and 37$^{\circ}C$ for 1-8 weeks was investigated. The peak intensities of PLA/LPCL/HPCL blend fibers in X-ray diffraction patterns decreased with an increase of blending time and LPCL contents in the blend fibers. The weight loss of PLA/LPCL/HPCL blend fibers increased with an increase of blending time, LPCL contents, and hydrolysis time while the tensile strength and modulus of the blend fibers decreased. The tensile strength and modulus of the blend fibers were also found to be increased with an increase of HPCL contents in the blend fibers. The optimum conditions to prepare PLA/LPCL/HPCL blend fibers for bioabsorbable sutures are LPCL contents of $5 wt\%, HPCL contents of $35 wt\%, and blending time of 30 min. The strength retention of the PLA/LPCL/HPCL blend fiber prepared under optimum conditions was about $93.5\% even at hydrolysis time of 2 weeks.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1298-1303
• /
• 2009

현무암 단섬유로 강화시킨 시멘트 복합재료의 섬유장과 혼입률에 따른 인장강도와 굽힘강도의 변화를 고찰하였다. 인장 및 굽힘강도의 증가는 섬유장의 증가에 따른 효과보다는 섬유 혼입률의 증가가 더 큰 역할을 하였다. 또한 현무암 단섬유와 시멘트 사이의 우수한 계면 접착력은 물리적 성질의 향상에 좋은 영향을 미친다고 보여진다. 시멘트의 수화시 생성되는 알칼리 조건과 유사한 포화 $Ca(OH)_2$ 용액에서의 중량감소율을 관찰한 결과 현무암 단섬유는 3주 동안의 침지 후에도 매우 작은 중량감소율을 나타냈다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.99-102
• /
• 2001

• 펄프종이기술
• /
• 제43권4호
• /
• pp.1-10
• /
• 2011

Beating or refining is an energy intensive process in paper industry. In India, most of the paper industries blend long fibered softwood pulps with short fibered hardwood or agro based pulps to get the paper properties of competitive level. Refining characteristics of the blend of pulps is very crucial with respect to freeness and strength properties. This study has been carried out to understand the refining behavior of three hardwood pulps and a softwood pulp. The hardwood and softwood pulps are blended in different proportions in two different ways; a) blending after their separate refining, and b) blending before refining followed by mixed refining of the blended pulps. Freeness of pulp, strength, optical and surface properties of paper along with formation have been determined and compared for both the refining methods. The fiber classification of refined pulps was also carried out to analyze the effect of refining method on fiber morphology. The mixed refining of hardwood and softwood pulps marginally affects the fiber morphology in comparison to separate refining of pulps. The strength and other properties of paper prepared from mixed refining of pulps are either better or comparable than those of separately refined pulps.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.102-102
• /
• 2003

TLCP/polyester composite fibers (TPCFs) based on melt blends of PEN, PET, and TLCP were prepared by melt blending and spinning process to achieve high performance fibers. Reinforcement effect and TLCP fibrillar structure resulted in improvement of mechanical properties for TPCFs. The increase in the apparent crystallite size was attributed to the development of larger crystallites and more ordered crystalline structures in the annealed TPCFs. Molecular orientation was an important factor to determine mechanical property of TPCFs.