• 대한산업공학회지
• /
• 제22권2호
• /
• pp.255-263
• /
• 1996

Optical fiber systems play an essential role In today's telecommunications networks. The recently standardized SONET technology has made a ring structure the preferred architecture for inter-city communication networks. In designing a SONET with ring structure, we consider inserting optional cites, which are not necessary in constructing the SONET, but cost-effective in connecting essential nodes in the ring. This problem is modeled as Steiner ring problem. Efficient heuristic procedures are developed based on the procedures for the traveling salesman problem. Computational results show that the proposed algorithm is excellent compared to the optimal solution. The error bound by the proposed method is 2 - 6% in experimented problems.

• Structural Engineering and Mechanics
• /
• 제44권5호
• /
• pp.649-661
• /
• 2012

An experimental research was conducted to investigate the strength of biaxially loaded short and slender reinforced concrete columns with high strength concrete. In the study, square and L-shaped section reinforced concrete columns were constructed and tested to obtain the load-deformation behaviour and strength of columns. The test results of column specimens were analysed with a theoretical method based on the fiber element technique. The theoretical ultimate strength capacities and the test results of column specimens have been compared and discussed in the paper. Besides this, observed failure mode and experimental and theoretical load-lateral deflection behaviour of the column specimens are presented.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.222-226
• /
• 2011

We demonstrated the feasibility of an amplified wavelength-division multiplexed passive optical network (WDM-PON) architecture based on broadband light source (BLS) seeded optical sources and a novel bidirectional reach extender. Our bidirectional reach extender could provide an amplification of both downstream and upstream signals as well as a BLS output for the upstream WDM signal generation. An error-free 1.25 Gb/s signal transmission over a 100-km long single-mode fiber was achieved in a bidirectional WDM-PON using BLS seeded reflective semiconductor optical amplifier (RSOA) sources.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.15-18
• /
• 2008

WDM is an incredibly promising technique in which multiple channels are operated along a single fiber, providing the facilities of terabit per second bandwidth. Thus, the survivability of WDM networks becomes critical for the success of the next generation internet architecture. Despite the fact that the path-based proactive restoration scheme guarantees 100% restoration as it computes a backup light path while the primary light path is being set up, this method results in additional capacity consumption. In this paper, an ideal technique is proposed that modifies the active multi-backup paths method and results in a better restoration scheme. Based on a theoretical analysis, a new method is shown to reduce the number of hopes as well as the restoration time.

• International Journal of Concrete Structures and Materials
• /
• 제6권1호
• /
• pp.41-47
• /
• 2012

Fiber-Reinforced Polymers (FRP) are used to enhance the behavior of structural components in either shear or flexure. The research conducted in this paper was mainly focused on the shear-strengthening of reinforced and prestressed concrete beams using FRP. The main objective of the research was to identify the parameters affecting the shear capacity provided by FRP and evaluate the accuracy of analytical models. A review of prior experimental data showed that the available analytical models used to estimate the added shear capacity of FRP struggle to provide a unified design equation that can predict accurately the shear contribution of externally applied FRP. In this study, the ACI 440.2R-$08^1$ model and the model developed by Triantafillou and Antonopoulos$^2$ were compared with the prior experimental data. Both analytical models failed to provide a satisfactory prediction of the FRP shear capacity. This study provides insights into potential reasons for the unsatisfactory prediction.

• 한국공간구조학회논문집
• /
• 제14권3호
• /
• pp.67-74
• /
• 2014

The author has proposed and verified the accuracy through experiments on a method of measurement through the use of sound waves that not only can quantitatively measure each of the dual directions of the fiber axis with high accuracy of membrane tension created on the surface of the membrane structure, but also can be easily operated in the field of construction. This paper reports the solution for problems of variables caused in the process of downsizing of the measurement equipment in order for practical use, and verifies the correspondence possibility of various stress ratios.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.99-102
• /
• 2003

This paper aims to observe the micro-mechanical behaviour of tow geometry during deformation of dry woven carbon-fiber fabric. With the increment of shear angle fabric experiences 'lock-up'phenomenon. In this paper, deformation of micro-mechanical parameters such as tow interval, change in tow amplitude and wavelength are investigated. To observe the micro-deformation of the fabric structure, appropriate specimens from bias extension and biaxial tests are sectioned and observed under the microscope. It was found that different loading conditions cause geometric deferences in the tow architecture.

• Computers and Concrete
• /
• 제2권2호
• /
• pp.111-123
• /
• 2005

The ductility of reinforced concrete bearing walls subjected to high axial loading and moment can be enhanced by improving the deformability of the compression zone or by reducing the neutral axis depth. The current state-of-the-art procedure evaluating the confinement effect prompts a consideration of the spaces between the transverse and longitudinal reinforcing bars, and a provision of tie bars. At the same time, consideration must also be given to the thickness of the walls. However, such considerations indicate that the confinement effect cannot be expected with the current practice of detailing wall ends in Korea. As an alternative, a comprehensive method for dimensioning boundary elements is proposed so that the entire section of a boundary element can stay within the compression zone when the full flexural strength of the wall is developed. In this comprehensive method, the once predominant code approach for determining the compression zone has been advanced by considering the rectangular stress block parameters varying with the extreme compression fiber strain. Moreover, the size of boundary elements can also be determined in relation to the architectural requirement.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.49-54
• /
• 2005

The purpose of this study has been to investigate the effect of dilation on the some mechanical properties of several types of warp-knitted vascular grafts. The structures of warp knit vascular grafts used in the experiments were reverse locknit, locknit, and Tricot. Various mechanical properties of these grafts were determined using devices developed for the purpose. Clinical data obtained were compared with experimental results of warp knit vascular grafts. The most important mechanical properties are found to be creep extension, bursting strengths, and compliance. Preliminary results indicate that vascular grafts are non-compliant and exhibit creep which is predictive of the long term dilation that has been noted in the clinical results. It is found that there is a positive correlation between experimental data and clinical results for at least the grafts tested.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2165-2172
• /
• 1998

Existing premises telecommucation wiring ad been installed for efficient telephone service. But premises wiring is currently ready to be reused as media for wideband digital services and Fiber-to-the-curb architecture. Electrical properties of premises wiring link have not characateized above frequencies for voice service. Accurte measurement of these characteristics are exssential for studies fof wideband ditital transmission system. On the other hand, the transmission qualities of premises wiring have been known to be worst in telecommunications access networks. So the knowledge of premises wiring sturucture as well as electrical properties is needed to improve the performance of premises wiring. In this paper, the structure of premises wiring is described in detail and electrical characteristics (characteristic impedance, SRL, attnuation, NEXT) about premises cables and stelecommucations link of representative apartment complex sare measured and naalyzed ove r16MHz range which is UTP Cat3 bandwidth.