• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.13-18
• /
• 2012

By the need for high-speed data transmission in PCB, the studies on the optical PCB has been conducted with optical interconnection and its packaging technology. Particularly, the polymer-based optical interconnection has been extensively studied with the advantages such as cost-effective and ease of process. For high-efficiency and passive alignment, the studies were performed using the 45 degree mirrors, MT connector, and etc. In this work, integrated PLC device and fiber alignment array block was fabricated by using imprint technology to solve the alignment and array problem of optical device and the optical fiber. The fabricated integrated block for optical interconnection of PLC device has achieved higher precision of decreasing the dimensional error of the patterns by optimization of process and its insertion loss has an average value of 4.03dB, lower than criteria specified by international standard. In addition, a optical waveguide with built-in lens has been proposed for high-efficiency and passive alignment. By simulation, it was confirmed that the proposed structure has higher coupling efficiency than conventional no-lens structure and has the broad tolerance for the spatial offset of optical waveguide.

• 한국태양에너지학회 논문집
• /
• 제37권3호
• /
• pp.1-12
• /
• 2017

This paper deals with the effectiveness of a fiber optic solar lighting system that uses a Fresnel lens mounted on a two-axis solar tracker. A series of comparative analyses were made concerning its performance as compared to fluorescent lighting by using a simulation model based on ECOTECT and RADIANCE as well as referring to actual data. ECOTECT was used to model the test room (space) while RADIANCE was used for its indoor lighting conditions (environment). It was found that the average indoor light levels of fluorescent lighting fully satisfy the KS standard (KS A 3011, general office, class [G]: 300-400-600 lux) whereas those of the solar lighting with light diffusers depends on the occlusion factor of roller shades installed on the south window.

• 천문학논총
• /
• 제27권3호
• /
• pp.87-93
• /
• 2012

A low-dispersion fiber feed Littrow-mounted grating spectrometer for education was designed and fabricated. The dispersion element is a reflective type blazed grating Edmundoptics NT 46-075 (spatial frequency 600 lines/mm, dimension $30mm{\times}30mm$, blazed angle 8.6 degree). The optical fiber coupler module for optical guiding from telescope to spectrometer is composed of a multi-mode FC connector - FC connector optical fiber patch cord (core/cladding diameter $50{\mu}m/125{\mu}m$) and two 1.25" throw-tube couplers. The lens for collimating and imaging is a general purpose focal length 50 mm camera lens (f/1.8). The device for optical path control is a rectangular prism (size $25mm{\times}25mm$). The imaging camera sensor is a Meade DSI Pro 2 CCD sensor (black and white, $752{\times}582$ pixels and pixel size $8.3{\mu}m{\times}8.6{\mu}m$). Softwares for data logging and analysis consist of Meade Autostar Suite, NIH imagej and Vernier Logger Pro 3. The wavelength coverage range of the spectrometer is 205 nm at central wavelength 550 nm. The wavelength resolution is 1.7 nm.

• 에너지공학
• /
• 제26권1호
• /
• pp.34-44
• /
• 2017

본 연구에서는 2축의 태양추적장치에 프레넬 렌즈를 장착한 fiber-optic 설비형 자연채광시스템의 효율성에 대하여 이론적 분석을 수행하였다. ECOTECT와 RADIANCE를 기반으로 시뮬레이션 모델을 개발하여 다양한 조건하에서 자연채광 시스템뿐만 아니라 형광등을 이용한 인공조명에 대한 실내 조도분석과 함께 실측 데이터와의 비교연구를 수행하였다. 형광등을 이용한 실내조명의 경우, 평균조도는 사무실 실내 조도 기준을(KS A 3011 일반 사무실 [G]등급[300-400-600lux]) 충분히 만족하는 결과를 보여주었다. 한편, 디퓨져를 사용한 자연채광시스템의 경우도 사무실 실내 조도 기준을 넘는 것으로 나타났다.

• Biomolecules & Therapeutics
• /
• 제24권2호
• /
• pp.178-183
• /
• 2016

Naturally occurring coumarin compounds have received substantial attention due to their pharmaceutical effects. Esculetin is a coumarin derivative and a polyphenol compound that is used in a variety of therapeutic and pharmacological strategies. However, its effect on aldose reductase activity remains poorly understood. In this study, the potential beneficial effects of esculetin on lenticular aldose reductase were investigated in galactose-fed (GAL) rats, an animal model of sugar cataracts. Cataracts were induced in Sprague-Dawley (SD) rats via a 50% galactose diet for 2 weeks, and groups of GAL rats were orally treated with esculetin (10 or 50 mg/kg body weight). In vehicle-treated GAL rats, lens opacification was observed, and swelling and membrane rupture of the lens fiber cells were increased. Additionally, aldose reductase was highly expressed in the lens epithelium and superficial cortical fibers during cataract development in the GAL rats. Esculetin reduced rat lens aldose reductase (RLAR) activity in vitro, and esculetin treatment significantly inhibited lens opacity, as well as morphological alterations, such as swelling, vacuolation and liquefaction of lens fibers, via the inhibition of aldose reductase in the GAL rats. These results indicate that esculetin is a useful treatment for galactose-induced cataracts.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.28-32
• /
• 2010

Technical demands for aspheric glass lens formed in market increases its application from simple camera lens module to fiber optics connection module in optical engineering. WC is often used as a metal core of the aspheric glass lens, but the long life time is issued because it fabricated in high temperature and high pressure environment. High hard thin film coating of lens core increases the core life time critically. Diamond Like Carbon(DLC) thin film coating shows very high hardness and low surface roughness, i.e. low friction between a glass lens and a metal core, and thus draw interests from an optical manufacturing industry. In addition, DLC thin film coating can removed by etching process and deposit the film again, which makes the core renewable. In this study, DLC films were deposited on the SiC ceramic core. The process variable in FVA(Filtered Vacuum Arc) method was the substrate bias-voltage. Deposited thin film was evaluated by raman spectroscopy, AFM and nano indenter and measured its crystal structure, surface roughness, and hardness. After applying optimum thin film condition, the life time and crystal structure transition of DLC thin film was monitored.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.135-136
• /
• 2007

• 마이크로전자및패키징학회지
• /
• 제25권2호
• /
• pp.35-39
• /
• 2018

광결합 효율(Fiber coupling efficiency)을 개선하기 위해서는 Laser diode에서 넓은 각도로 방출된 빛을 광섬유의 중심(Core) 부분으로 모아주는 집광렌즈(Collimating lens)가 필수적이다. 현재 사용되는 집광렌즈는 형틀(Mold)을 이용한 글래스 몰드(Glass mold) 공법이 널리 사용되고 있다. 이 방식은 생산단가가 저렴하지만, 정교한 성형이 어렵고 구면수차와 같은 품질문제가 있다. 본 연구는 기존의 글래스 몰드 공법을 반도체 공정으로 대체함으로써 표면 가공의 정밀도를 높이고, 렌즈의 재질 또한 반도체 공정에 적합한 실리콘으로 변경하였다. 반도체공정은 PR을 이용한 포토리소그래피(Photolithography) 공정과 플라즈마를 이용한 건식 식각(Dry etching) 공정으로 구성된다. 광결합 효율은 실리콘 렌즈의 광학적 특성을 평가하기 위해 초정밀 정렬 시스템을 사용하여 측정되었다. 그 결과, 렌즈 직경 $220{\mu}m$ 일 때의 최대 광결합 효율은 50%로 측정되었고, 렌즈 직경 $210-240{\mu}m$ 범위에서는 최고 광결합 효율 대비 5% 이하의 광결합 특성저하를 보여줌을 확인하였다.

• 한국광학회지
• /
• 제19권2호
• /
• pp.87-94
• /
• 2008

공초점 내시 현미경의 경우 살아있는(in vivo) 동물체들의 뇌 속에서의 암세포나 특정 세포를 분석할 수 있으며, 비 침습적으로 얻을 수 있는 기술과 동시에 실시간으로 암을 검출할 수 있는 장점이 있다. 공초점 내시 현미경의 경우 최소 직경과 고 분해능을 요하게 된다. 본 논문은 최소 직경을 가지는 GRIN 렌즈와 유동적으로 움직일 수 있는 광섬유 다발을 연결시킴으로써 보다 측정에 용이하도록 하였다. 직경이 1 mm이고 수치구경이 0.5이며 pitch가 0.25인 GRIN렌즈를 사용하였으며, 광섬유 다발은 30,000개의 코어로 구성된 유동적인 광섬유 다발을 사용하였다. 본 논문은 GRIN 렌즈에 의해서 발생되었던 구면수차는 광학보상자를 이용하여 보정하였다. 그 결과 설계되어진 공초점 내시 현미경 대물렌즈의 경우 종 분해능은 $1.63\;{\mu}m$이고 축상물점과 비축물점에서의 에너지 분포가 100%일 때 각각의 spot size는 축상물점에서 $0.3\;{\mu}m$ 비축물점에서 $0.83\;{\mu}m$의 결과를 얻었으며 보다 값싸고 제작에 용이한 양산 비구면 렌즈로 대체 구현된 결과에서는 종 분해능이 $1.74\;{\mu}m$이고, 축상 물점에 대한 spot size는 $1.1\;{\mu}m$이고 비축물점에서는 spot size가 $2.94\;{\mu}m$로 설계되었다.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.