• The Korean Journal of Ceramics
• /
• 제5권1호
• /
• pp.82-86
• /
• 1999

For nonconducting perovskite titanates ATiO3 and A'1/2A"1/2TiO3, 5 ferroelectric members were discriminated from 17 quantum paraelectric members via average mass of A ions m(A): ferroelectric for m(A)〉110 a.u. and quantum paraelectric for m(A)<100 a.u. An intuitive explanation of the origin of the discrimination is given concenrned with the ferroelectric soft modes in perovskite ATiO3. Based on the above discrimination, trial synthesis of ferroelectric candiate substances are presented.

• 한국전기전자재료학회논문지
• /
• 제30권2호
• /
• pp.126-132
• /
• 2017

The power conversion efficiency of organic polymer solar cells was enhanced by introducing a ferroelectric polymer layer at the interface between active layer and metal electrode. The power conversion efficiency was increased by 50% through the enhancement of the open circuit voltage. To investigate the role of the ferroelectric layer on the dissociation process of the excitons, non-radiative portion of the exciton decay was directly measured by using photoacoustic technique. The results show that the ferroelectric nature of the buffer layer does not play any roles on the dissociation process of the excitons, which indicates the efficiency enhancement is not due to the ferroelectricity of the buffer layer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.191-194
• /
• 1999

Switching behaviour of the ferroelectric thin film and device characteristics of the MFSFET (Metal-Ferroelectric-Semiconductor FET) are simulated with taking into account the accumulation of oxygen vacancies near interface between the ferroelectric thin film and the bottom electrode caused by the progress of fatigue. We show net switching current decreases due fatigue in the switching model. It indicates that oxygen vacancy strongly suppresses polarization reversal. The difference of saturation drain current of the device before fatigue is shown by the dual threshold voltages in I$_{D}$-V$_{D}$ curve as 6㎃/$\textrm{cm}^2$ and decreases as much as 50% after fatigue. Our simulation model is expected to play an important role in estimation of the behavior of MFSFET device with various ferroelectric thin films.lms.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.157-160
• /
• 2002

The ferroelectric domain variation and electrical performance of $Pb(Zr,Ti)O_{3}$ (PZT) based capacitors through La additions were systematically studied. La substitution up to 10 % was performed to lower the coercive and saturation voltages of epitaxial ferroelectric capacitors grown on Si using a (Ti_{0.9}Al_{0.1})N/Pt$ conducting barrier composite. Ferroelectric capacitors substituted with 10 % La show significantly lower coercive voltage compared to capacitors with 0 % and 3 % La. This is attributed to a systematic microstructure change into $180^{\circ}C$ domain and decrease in the tetragonality (i.e., c/a ratio) of the ferroelectric phase. These capacitors show promise as storage elements in low power memory architectures.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.161-164
• /
• 2002

Polycrystalline and epitaxial heterostructure films of $La_{0.5}Sr_{0.5}CoO_{3}/Pb(Nb_{0.04}Zr_{0.28}Ti_{0.68})O_{3}/La_{0.5}Sr_{0.5}CoO_{3}$ (LSCO/PNZT/LSCO) capacitors were evaluated in terms of low voltage and high speed operation in high density memory, using TiN/Pt conducting barrier combination. Structural studies for a high density ferroelectric memory process flow, which requires the integration of conducting barrier layers to connect the drain of the pass-gate transistor to the bottom electrode of the ferroelectric stack, indicate complete phase purity (i.e. fully perovskite) in both epitaxial and polycrystalline materials. The polycrystalline capacitors show lower remnant polarization and coercive voltages. However, the retention, and high-speed characteristics are similar, indicating minimal influence of crystalline quality on the ferroelectric properties.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.120-125
• /
• 2005

Effect of transverse electric fields on fracture behavior in ferroelectric ceramics under purely electrical loading is investigated. It is shown that the shape and size of the domain switching zone depend strongly on the ratio of the transverse electric field to the coercive electric field as well as the direction of the applied electric field. Under small-scale conditions, the crack-tip mode I and II stress intensity factors induced by ferroelectric domain switching are numerically obtained. The crack kinking in ferroelectric ceramics is also discussed.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.215-218
• /
• 2015

A pyroelctric properties of Ni(x)-doped PMNT systems were analyzed. Modified PMNT samples were prepared using the columbite structure method. Pyroelectric current, polarization, dielectric constant and dissipation factor of Ni-doped PMNT samples were measured as a function of temperature. By adding a small amount of NiO, pyroelectricity of PMNT is increased. Unlike the normal $ABO_3$ ferroelectric, Ni-doped PMNT showed properties for relaxor ferroelectric of causing the successive phase transition over a wide temperature. The optimum conditions for obtaining compositions with improvement ferroelectric properties are a nominal addition of 0.02 mole% Ni. Also, Ni-doped PMNT ferroelectric showed excellent pyroelectric figures of merit in the vicinity of room temperature. The pyroelectric coefficient ($0.00524C/m^2K$ at $25^{\circ}C$) and figures of merit ($F_v{\sim}0.039m^2/C$ and $F_d{\sim}0.664{\times}10^{-4}Pa^{-1/2}$) of composition PMNT with 0.02 mole% Ni are comparable to the earlier reports on lead-type pyroelectrics.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.577-584
• /
• 2003

A crack with growth in ferroelectric ceramics under purely electric loading is analyzed. The crack tip stress intensity factor for the growing crack under small-scale conditions is evaluated by employing the model of nonlinear domain switching. The crack tip stress intensity factor increases or decreases with crack growth, depending on the electrical nonlinear behavior and the direction of an applied electric field. It is shown that the ferroelectric material can be either toughened or weakened as the crack grows. The steady state crack growth in ferroelectric ceramics is also discussed.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.18-18
• /
• 2002

Although it was suggested in 1962 that an efficient wavelength conversion could be achieved using ferroelectric crystals of periodic 180° domains, it was not until 1990's that quasi-phase-matching (QPM) became realized, as technology for periodic poling of LiNbO₃ crystals was readily available. Since ferroelectric domain inversion brings about change of the sign of second-order nonlinear susceptibility, periodically poled ferroelectric structures provide an ideal way of achieving QPM for second-harmonic generation and optical parametric oscillation. Periodically poled ferroelectric domains can also be utilized for optical devices, such as Brags electrooptic modulators. fabrication of stable periodic domain structures depends on a number of poling parameters of a ferroelectric crystal, such as coercive field, internal field and electrical conductivity. We present poling kinetics of KNbO₃ crystals, which involve domain nucleation and growth, backswitching, relaxation of internal field. Optimum poling conditions were established by designing a proper wave shape of external field. We demonstrate an efficient second-harmonic generation using QPM in a periodically poled KNbO₃ crystal.

• ETRI Journal
• /
• 제27권6호
• /
• pp.677-684
• /
• 2005

A phased array antenna was fabricated using four-element ferroelectric phase shifters with a coplanar waveguide (CPW) transmission line structure based on a $Ba_{0.6}Sr_{0.4}TiO_3(BST)/MgO$ structure. Epitaxial BST films were deposited on MgO (001) substrates by pulsed laser deposition. To attain the large differential phase shift and small losses for a ferroelectric CPW phase shifter, an impedance-matching-part adding technique between the effective transmission line and connecting cable was used. The return loss and insertion loss for this techniqueadapted BST CPW device were improved with respect to those for a normal BST CPW device. For an X-band phased array antenna system consisting of ferroelectric BST CPW phase shifters, power divider, dc block, patch antenna, and programmed dc power, the steering beam could be tilted by $15^{\circ}$ in either direction.