• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.127-133
• /
• 2003

In this study, the impact analysis for the steel fender system that designed for protection of collision between vessel and bridge was performed The size of objective collision vessel assumed as 3000 dead weight tonnage(DWT). The impact forces and the impact energies were estimated by formulas of several design codes, and the steel fender system was designed based on the estimated forces and energy. The bow of objective vessel was modeled as rigid body, and bridge substructure was modeled as fixed support. Since, the impact analysis have the dynamic nonlinear features, such as, material nonlinear, large deformation and contact, explicit structural analysis program was used The analysis results presented that the impact forces formulas in codes have the sufficient conservativeness.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.71-78
• /
• 2003

In this study, the impact analysis for the steel fender system that designed for protection of collision between vessel and bridge was peformed. The size of objective collision vessel assumed as 3000 dead weight tonnage(DWT). The impact forces and the impact energies were estimated by formulas of several design codes, and the steel fender system was designed based on the estimated forces and energy. The bow of objective vessel was modeled as rigid body, and bridge substructure was modeled as fixed support. Since, the impact analysis have the dynamic nonlinear features, such as, material nonlinear, large deformation and contact, explicit structural analysis program was used. The analysis results presented that the impact forces formulas in codes have the sufficient conservativeness.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.43-49
• /
• 2005

in this paper a dolphin-fender moored pontoon-type floating structure in shallow water depth is studied focusing on mooring force. The pontoon-type floating structure is 500m long, 300m wide. The structure has partially non-uniform drafts of 2.0m and 3.0m. The employed mooring system is a guyed frame type dolphin-fender system. The 1/125 scale model fender system is made of rubber tube to have hi-linear load deflection characteristics. A series of model tests has been conducted focusing on motion and fender force responses in regular and irregular waves at KRISO's ocean engineering basin Non-linear numerical simulation of fender reaction force has been carried out and the results are compared with those of model tests. The simulated rigid body motion and mooring forces also have been compared with the test results.

• 소성∙가공
• /
• 제17권7호
• /
• pp.511-516
• /
• 2008

A drawbead die for the experimental determination of drawbead forces was newly introduced in this paper. While the conventional Nine's drawbead die inevitably includes effects of a blank holding force on the measured drawbead forces, the new drawbead die excludes it by removing the blank holder contact in the dieface. Therefore, the new drawbead die can provide more realistic drawbead forces without considering somewhat arbitrary effect of blank holder with the computational procedure of forming process. The drawbead opening force and restraining force obtained by adopting the two experimental dies were compared for the validation of accuracy in the FEM simulation of automotive fender forming process. The compared section strains and draw-ins confirmed that the present drawbead die provides better drawbead forces for an accurate FEM simulation of sheet metal forming process.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.135-142
• /
• 2015

The float over method is the most preferred method for installing heavy topside onto a jacket platform. A very complex platform with multiple jacket structures on a specific field requires multiple installation procedures. This study validated the installation of two topsides using a single installation barge to reduce the operation and installation cost. The hydrodynamic properties of the installation barge during the installation of two topsides were calculated. The tension and fender forces during docking were investigated to show the validity of the proposed dual topside installation method. In conclusion, the operational safety of the proposed procedure was validated through the calculation of the motion of the installation vessel and loads on the jacket legs.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.217-219
• /
• 2008

A new experimental model for determining drawbead forces, which modifies the dieface of Nine's experimental model, is introduced and the better validity of the drawbead opening and restraining forces of new model than those of Nine's is demonstrated. While Nine's model considers a blank holding force as one of forming variables, new model excludes it by removing blank holder in the dieface. The comparison of the strains found by FEM simulation of automotive fender draw forming process with those measured in a formed panel recommends the new model for accurate drawbead forces.

• 소성∙가공
• /
• 제16권6호
• /
• pp.457-462
• /
• 2007

The drawbeads, which are used for controlling the flow of the sheet into die cavity by imposing the tension and for preventing the forming defects like wrinkling, springback, etc. during the sheet forming process, affect the formability strongly because of the differences in the restraint and opening forces according to the drawbead shapes and dimensions. In this study, the experimental device enabling to measure the drawbead restraining and opening forces is manufactured and the drawing forces of circular, square, and step drawbeads are measured. The drawbead restraining and opening forces of a circular drawbead are increased as its drawbead height is increased. Similarly, those of a square drawbead are increased as its height is increased and shoulder radii decreased. The drawbead forces obtained from the experiment were compared with those calculated in the numerical simulation of stamping process of automotive fender. Good agreement was found so that the experimental measurements can be used in the simulation of auto-body stamping process.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 춘계학술발표회
• /
• pp.107-112
• /
• 2004

선박의 대형화 추세에 따른 항만 운영의 효율성 및 대형 선박의 접안 안전성을 향상시키기 위해서는 먼저 선체에 작용하는 접안에너지를 합리적으로 산출하여야 한다. 선박의 접안에너지는 방충재와 같은 항만시설물의 설계에 대한 허용 기준을 결정하는 변수임과 동시에 도선사 및 선박의 조선자에게는 예인선의 필요 마력이나 접안속도 둥을 결정하는데 있어 중요한 판단 요소로 활용된다. 본 연구에서는 현재 사용되고 있는 운동역학적인 방법을 토대로 한 접안에너지 산출 방법에 대해 유체역학적인 측면에서 문제를 제기하고, 부두 전면의 수심과 선박의 형상에 따라 변화하는 천수역 선체부가질량을 고려한 접안에너지의 산출 방법을 제안한다. 또한 천수역에서 선체에 작용하는 부가질량을 고려한 접안에너지 산출 방법을 사용하여 1600TEU급에서 12000TEU급까지의 컨테이너 선박을 대상으로 계통적으로 각각의 접안에너지를 계산하고, 현행의 접안에너지 산출방법과 비교 검토를 실시한다.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.673-678
• /
• 2005

선박의 대형화 추세에 따른 항만 운영의 효율성 및 대형 선박의 접안 안전성을 향상시키기 위해서는 먼저 선체에 작용하는 접안에너지를 합리적으로 산출하여야 한다. 선박의 접안에너지는 방충재와 같은 항만시설물의 설계에 대한 허용 기준을 결정하는 변수임과 동시에 도선사 및 선박의 조선자에게는 예인선의 필요 마력이나 접안속도 등을 결정하는데 있어 중요한 판판 요소로 활용된다. 본 연구에서는 현재 사용되고 있는 운동역학적인 방법을 토대로 한 접안에너지 산출 방법에 대해 유체역학적인 측면에서 문제를 제기하고, 부두 전면의 수심과 선박의 형상에 따라 변화하는 천수역 선체부가질량을 고려한 접안에너지의 산출 방법을 제안한다. 또한 천수역에서 선체에 작용하는 부가질량을 고려한 접안에너지 산출 방법을 사용하여 1600TEU급에서 12000TEU급까지의 컨테이너 선박을 대상으로 계통적으로 각각의 접안에너지를 계산하고, 현행의 접안에너지 산출방법과 비교 검토를 실시한다.

• 한국해안·해양공학회논문집
• /
• 제22권6호
• /
• pp.423-428
• /
• 2010

본 계류안정성 해석은 광양만 부두의 포항제철 제품 및 고철부두에 대한 적정 선박을 선정하는 방법의 하나로서 수행되었다. 계류안정성 해석을 위해서는 우선 제품부두에 정박하는 기준이 되는 대상선박을 선정하여 각 선박의 운동특성을 파악하고, 이것을 바탕으로 각 대상 선박의 유체력을 계산한 후 파랑, 바람 및 조류를 고려하여 안벽에 계류된 선박의 계류안정성해석을 수행하였다. 이를 통해 광양 제품부두에서의 계류안정성을 보장하는 적정한 선박 선정기준을 개선하고자 하였다.