• 한국가스학회지
• /
• 제25권1호
• /
• pp.30-39
• /
• 2021

세계적으로 천연가스는 환경적, 정치적, 지역적인 이유로 중요한 에너지원으로 부상하고 있다. 우리나라에서 천연가스는 액화천연가스로 수입하고 있으며, 석탄과 원전을 대체하는 연료나 원료의 활용에서 액화천연가스는 증가하고 있다. 우리나라는 천연가스를 수입에 의존하고 있기 때문에 공급에 대한 안정성분석이 중요하다. 따라서, 본 연구에서는 우리나라 수입구조의 위험도 분석을 통하여 공급리스크를 줄이고 안정적인 공급과 수요를 위한 방안을 제시하였다. 공급위험도를 감소시키기 위해 한 국가로부터의 수입 집중도를 낮춰야 하며, 가스공급안정성 지수 (gas supply security index, GSSI)가 낮은 국가의 수입비중을 낮추고 상대적으로 안정적인 국가인 러시아로부터 수입을 증가시켜야 한다. 또한, 수입국가의 수를 늘리거나 안정적 공급이 가능한 국가와의 관계 유지는 우리나라 수입가스의 공급안정성지표 (total gas supply security index, TGSSI)에 긍정적인 영향을 줄 것으로 분석되었다.

• Journal of Microbiology and Biotechnology
• /
• 제31권11호
• /
• pp.1533-1544
• /
• 2021

n-Caproic acid (CA) is gaining increased attention due to its high value as a chemical feedstock. Ruminococcaceae bacterium strain CPB6 is an anaerobic mesophilic bacterium that is highly prolific in its ability to perform chain elongation of lactate to CA. However, little is known about the genome-wide transcriptional analysis of strain CPB6 for CA production triggered by the supplementation of exogenous lactate. In this study, cultivation of strain CPB6 was carried out in the absence and presence of lactate. Transcriptional profiles were analyzed using RNA-seq, and differentially expressed genes (DEGs) between the lactate-supplemented cells and control cells without lactate were analyzed. The results showed that lactate supplementation led to earlier CA p,roduction, and higher final CA titer and productivity. 295 genes were substrate and/or growth dependent, and these genes cover crucial functional categories. Specifically, 5 genes responsible for the reverse β-oxidation pathway, 11 genes encoding ATP-binding cassette (ABC) transporters, 6 genes encoding substrate-binding protein (SBP), and 4 genes encoding phosphotransferase system (PTS) transporters were strikingly upregulated in response to the addition of lactate. These genes would be candidates for future studies aiming at understanding the regulatory mechanism of lactate conversion into CA, as well as for the improvement of CA production in strain CPB6. The findings presented herein reveal unique insights into the biomolecular effect of lactate on CA production at the transcriptional level.

• 한국분말재료학회지
• /
• 제29권3호
• /
• pp.226-232
• /
• 2022

In this study, a new manufacturing process for a multilayer-clad electrical contact material is suggested. A thin and dense BCuP-5 (Cu-15Ag-5P filler metal) coating layer is fabricated on a Ag plate using a high-velocity oxygen-fuel (HVOF) process. Subsequently, the microstructure and bonding properties of the HVOF BCuP-5 coating layer are evaluated. The thickness of the HVOF BCuP-5 coating layer is determined as 34.8 ㎛, and the surface fluctuation is measured as approximately 3.2 ㎛. The microstructure of the coating layer is composed of Cu, Ag, and Cu-Ag-Cu3P ternary eutectic phases, similar to the initial BCuP-5 powder feedstock. The average hardness of the coating layer is 154.6 HV, which is confirmed to be higher than that of the conventional BCuP-5 alloy. The pull-off strength of the Ag/BCup-5 layer is determined as 21.6 MPa. Thus, the possibility of manufacturing a multilayer-clad electrical contact material using the HVOF process is also discussed.

• 한국분말재료학회지
• /
• 제29권4호
• /
• pp.283-290
• /
• 2022

A Cu-15Ag-5P filler metal (BCuP-5) is fabricated on a Ag substrate using a high-velocity oxygen fuel (HVOF) thermal spray process, followed by post-heat treatment (300℃ for 1 h and 400℃ for 1 h) of the HVOF coating layers to control its microstructure and mechanical properties. Additionally, the microstructure and mechanical properties are evaluated according to the post-heat treatment conditions. The porosity of the heat-treated coating layers are significantly reduced to less than half those of the as-sprayed coating layer, and the pore shape changes to a spherical shape. The constituent phases of the coating layers are Cu, Ag, and Cu-Ag-Cu3P eutectic, which is identical to the initial powder feedstock. A more uniform microstructure is obtained as the heat-treatment temperature increases. The hardness of the coating layer is 154.6 Hv (as-sprayed), 161.2 Hv (300℃ for 1 h), and 167.0 Hv (400℃ for 1 h), which increases with increasing heat-treatment temperature, and is 2.35 times higher than that of the conventional cast alloy. As a result of the pull-out test, loss or separation of the coating layer rarely occurs in the heat-treated coating layer.

• 한국분말재료학회지
• /
• 제30권1호
• /
• pp.13-21
• /
• 2023

In additive manufacturing, the flowability of feedstock particles determines the quality of the parts that are affected by different parameters, including the chemistry and morphology of the powders and particle size distribution. In this study, the microstructures and flowabilities of gas-atomized heat-resistant alloys for additive manufacturing applications are investigated. A KHR45A alloy powder with a composition of Fe-30Cr-40Mn-1.8Nb (wt.%) is fabricated using gas atomization process. The microstructure and effect of powder chemistry and morphology on the flow behavior are investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and revolution powder analysis. The results reveal the formation of spherical particles composed of single-phase FCC dendritic structures after gas atomization. SEM observations show variations in the microstructures of the powder particles with different size distributions. Elemental distribution maps, line scans, and high-resolution XPS results indicate the presence of a Si-rich oxide accompanied by Fe, Cr, and Nb metal oxides in the outer layer of the powders. The flowability behavior is found to be induced by the particle size distribution, which can be attributed to the interparticle interactions and friction of particles with different sizes.

• 한국환경과학회지
• /
• 제31권12호
• /
• pp.1127-1134
• /
• 2022

Herein , the effect of changes in the organic loading rate in anaerobic digestion was evaluated. The experiment was carried out by a laboratory -scale semi-continuous stirred tank reactor, and feedstock was food-waste leached. The organic loading rate was increased by 0.5 kgVS/m3 in each phase from 1.0 kgVS/m3 to 4.0 kgVS/m3. At the end of the operation, to check the failure of the reactor, the organic loading rate was increased by 1.0 kgVS/m3 in each phase and reached 6.0 kgVS/m3. This shows that the biogas yield decreased as organic loading rate increased. Biogas production seemed to be unstable at 3.5-6.0 kgVS/m3. Moreover, biogas production dramatically fell to approximately 0 mL at 6.0 kgVS/m3, which was decided as the operation failure on the 16th day of the las tphase. The result of the reactor analysis shows that the cumulation of volatile fatty acid increased as the organic loading rate increased. This seems to occur due to the decreasein pH in the reactor and led to extinction of anaerobic bacteria, which were the biogas products. Although the buffer compound (alkalinity) could prevent the decline in pH, the concentration of alkalinity was found to be lacking at a high organic loading rate

• 대한토목학회논문집
• /
• 제42권2호
• /
• pp.257-261
• /
• 2022

건축물의 디자인 자유도 향상, 작업자 안전 향상, 비교적 쉬운 납기예측 등의 이점으로 건설 산업에 적용된 3D 프린팅 기술(Additive manufacturing, AM)은 각종 효과성의 검증과 산업적용이 진행되고 있다. 다만, 기존기술대비 낮은 성숙도로 인해, 건축AM기술의 전주기에 발생하는 새로운 문제들을 해소하기 위한 연구들이 진행 중이다. 본 논문에서는 이러한 문제점 중에서도 현장 환경에 건축물을 적층 시공하는 과정에서, 낮은 시공표면평탄이 적층 제조 형상물에 미치는 영향을 확인한다. 특히 레이저 스캐닝을 통한 3차원 재구성 및 정량 분석을 통해, 낮은 평탄도로 인한 불균일한 적층형상물을 분석하고, 이를 해소하기 위한 적층시공전략을 제안한다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2019년도 정기학술대회 발표논문집
• /
• pp.83-83
• /
• 2019

Increasing the CO₂ concentration in the atmosphere induce high temperature and rising sea levels. So the technology that capture and reuse of the CO₂ have been recently become popular. Among other methods, CRR(CO2₂ reduction reaction) is typical method of CO₂ reusing. Electrocatalyst can show more higher efficiencies in CRR than photocatalyst because it doesn't use nature source. Nowadays, finding high efficient electrocatalyst by controlling electronic (affected by stoichiometry) and geometric (affected by atomic arrangement) factors are very important issues. Mono-atomic electro-catalyst has limitations on controlling binding energy because each intermediate has own binding energy range. So the Multi-metallic electro-catalyst is important to stabilize intermediate at the same time. Carbon monoxide(CO) which is our target product and important feedstock of useful products. Au is known for the most high CO production metal. With copper, Not only gold/copper has advantages which is they have FCC packing for easily forming solid solution regardless of stoichiometry but also presence of adsorbed CO on Cu promotes the desorption of CO on Au because of strong repulsion. And gold/copper bi-metal catalyst can show high catalytic activity(mass activity) although it has low selectivity relatively Gold. Actually, multi-metallic catalyst structure control method is limited in the solution method which is takes a lot of time. In here, we introduce CTS(carbo thermal shock) method which is using heat to make MMNP in a few seconds for making gold-copper system. This method is very simple and efficient in terms of time(very short reaction time and using carbon substrate as a direct working electrode) and increasing reaction sites(highly dispersed and mixing alloy structures). Last one is easy to control degree of mixing and it can induce 5 or more metals in one alloy system. Gold/copper by CTS can show higher catalytic activity depending on metal ratio which is altered easily by changing simple variables. The ultimate goals are making CO₂ test system by CTS which can check the selectivity depending on metal types in a very short time.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.561-569
• /
• 2023

푸르푸랄(furfural)은 리그노셀룰로오스 바이오매스(lignocellulose biomass)의 헤미셀룰로오스(hemicellulose) 성분 중 하나인 자일로스(xylose)로부터 생산되는 플랫폼 화학물질이다. 푸르푸랄은 페놀류 화합물이나 바이오 연료 등의 중요한 원료로 사용될 수 있다. 본 연구에서는 푸르푸랄 생산공정에서 일반적으로 사용되는 산 촉매인 황산(sulfuric acid)과 친환경적 촉매인 포름산(formic acid) 두 가지 촉매를 이용하여 회분식 반응 시스템(batch system)에서 자일로스로부터 푸르푸랄을 생산하기 위한 조건을 비교 및 최적화하였다. 자일로스의 초기 농도(10 g/L~100 g/L), 반응 온도(140~200 ℃), 황산 촉매(1~3 wt%), 포름산 촉매(5~10 wt%), 반응 시간에 따라 자일로스로부터 푸르푸랄 수율에 미치는 영향을 조사하였다. 촉매 종류에 따른 최적 조건은 다음과 같았다. 황산 촉매의 경우, 3 wt%의 촉매농도, 50 g/L의 초기 자일로스 농도, 180 ℃의 온도 10분의 반응시간에서 최대 58.97%의 푸르푸랄 수율을 얻었다. 포름산 촉매의 겨우, 5 wt%의 촉매농도, 50 g/L의 초기 자일로스 농도, 180 ℃의 온도, 150분 반응 시간에서 65.32%의 푸르푸랄 수율을 확보하였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2023년도 임시총회 및 춘계학술대회
• /
• pp.12-12
• /
• 2023

Plant biomass, or lignocellulose, is one of the most abundant natural resources on earth. Lignocellulosic biomass, such as agricultural and forestry residue, serves as a renewable feedstock for microbial cell factories due to its low price and abundant availability. However, the recalcitrance of lignocellulosic biomass requires a pretreatment process prior to microbial fermentation, from which fermentable sugars including xylose and glucose are generated along with various inhibitory compounds. The presence of furan derivatives, such as 5-hydroxymethyl-2-furaldehyde and 2-furaldehyde (furfural), hampers the microbial conversion of lignocellulosic biomass into value-added commodities. In this study, furfural tolerance was improved by investigating the detoxification mechanism in non-model yeast. The genes encoding aldehyde dehydrogenases were overexpressed to enhance furfural tolerance and resulted in improving cell growth and lipid production that can be converted into biofuel. Taken together, this approach contributes to the understanding of the reducing toxicity mechanism of furfural by the aldehyde dehydrogenases and provides a promising strategy that the use of microorganism as an industrial workhorse to treat efficiently lignocellulosic biomass as sustainable plant derivatives.