• 제목/요약/키워드: Feeding characteristics

검색결과 1,398건 처리시간 0.027초

Effects of a pineapple (Ananas comosus L.) cannery by-product on growth performance and carcass characteristics in finishing Hanwoo steers

  • Choi, Yongjun;Lee, Sangrak;Na, Youngjun
    • Animal Bioscience
    • /
    • 제34권2호
    • /
    • pp.233-242
    • /
    • 2021
  • Objective: The aim of this study was to determine the effect of pineapple cannery by-product (PCB) level on the growth performance and carcass characteristics of finishing Hanwoo steers. Methods: The feeding stage was divided into early and late finishing stages. A total of 60 castrated Hanwoo steers (13.9±0.8 months old, 418.8±36.5 kg initial body weight [BW]) were blocked by initial BW and then randomly allotted into 12 pens (five head/pen). The pens were randomly assigned to control (CONT), low PCB (LPCB), or high PCB (HPCB) treatments. These diets contained 0%, 1.5%, or 3.0% of PCB (on a dry matter [DM] basis; as-fed basis was 0%, 10.6%, or 21.2%), respectively. Results: For the early finishing stage, body weight gain (BWG) and average daily gain (ADG) of the CONT and LPCB feeding groups were greater (p<0.05) than those of the HPCB feeding group. In addition, there were linear and quadratic effects on BWG and ADG with increasing dietary PCB level (p<0.05). The gain to feed (G:F) ratio tends to quadratically decrease with an increasing PCB level in the early finishing stage (p = 0.076). Growth performances of late finishing stage were not affected by PCB level. The marbling score of the LPCB feeding group was similar to that of the CONT feeding group. However, there was a linear decrease (p< 0.05) in marbling score and quality grade among treatments as PCB was increased in the diet. In the longissimus muscle free amino acid profile, histidine composition increased linearly (p<0.05) with an increasing level of PCB. Conclusion: The level of PCB 1.5% DM in diet can be used for finishing steers without any adverse effects on growth and carcass performances. However, there were some negative effects on growth and carcass performance in the HPCB feeding group.

일부도시(一部都市) 아파트지역(地域) 어머니의 수유(授乳)에 관(關)한 조사연구(調査硏究) (A Study on Mother's Feeding Practice in a Urban Apartment Area)

  • 이성세
    • Journal of Preventive Medicine and Public Health
    • /
    • 제15권1호
    • /
    • pp.167-177
    • /
    • 1982
  • This study was undertaken to observe relationships between patterns of feeding, supplementary-feeding and various maternal, family, and socioeconomic charactereistics in Hae Cheog Apartment area in Cheongdam-dong, Kangnamku, Seoul on July 2 to 12 in 1982. The results were based on a questionnaire from 179 mothers who have the last-born child under two years old. Results were as follows: 1) In socio-demographic characteristics, most of mothers were 25 to 30 years old and 52.0% of index children were under 6 months old. About 56.0% of families were the salaries and 47.0% of them earn over 500,000 won a month. 40.8% of mothers were college graduates and 81.6% of mothers had no occupation. 2) 89.4% of mothers received prenatal care in pregnancy of the index children and mothers who have delivered the child in medical institute were 88.3%. Mothers who recieved education of breast care and feeding technique through prenatal care were 22.4%, 31.8% respectively. 3) In the feeding method, 44.1% of mothers took the breast feeding, 24.0% of them chose the artificial feeding, and 20.7% of them chose the mixed feeding. Mothers who changed the-method from breast feeding to artificial feeding were 10.6% and only 0.6% of mothers changed from artificial feeding to breast feeding. 4) According to the questionnaire, 37 mothers have already finished lactation (no relation with. the beginning of weaning food). In breast feeding, one mother has lactated for $4{\sim}6$ months, one has lactated for $7{\sim}9$ months, four have lactated for $10{\sim}12$ months, and seven have. continued the lactation over 12 months. In artificial and mixed feeding, as the same phenomenon, most of mothers have lactated for more than 12 months. 5) The reasons for feeding method were as follows: In breast feeding, 64.6% of them took the method because they thought the breast milk nutrious, in artificial feeding, 34.9% of them chose it because they had occupation and in the mixed feeding, 67.6% of mothers took the method because of lack of their breast milk. In the case of changing the method from breast feeding to artificial feeding, 42.1% of them answered that they had to change the method because of lack of breast milk. 6) In most of cases, the 4th month was the proper period to begin the weaning food and 32.5% of breast feeding children and 27.6% of artificial feeding children began the weaning food in 4th month. After 4th month, there was no difference between breast feeding and artificial feeding in the beginning of weaning food. 7) In the matter of menstruation, 29.8% of mothers who had breast feeding started their menstruations in 3 months and the rest of them delayed until 12 months. 40% of mothers who had artificial feeding began to menstruate after 2 months and all the rest started within 5 months. 8) The birth interval between the index child and next new child (would-be-born): In breast feeding, the interval of $18{\sim}24$ months had a majority as 50.0%, and in the artificial feeding, the interval of over 24 months marked 66.7% of them. It was analyzed that the birth interval of artificial feeding was wider than that of breast feeding. 9) In the desirable number of children, the mothers who had breast feeding wanted two sons and two daughters as proper children. Those who want two children in disregard of the sex (son or daughter) were 89.3% of breast feeding, and 80.0% of artificial feeding respectively. Mothers who had breast feeding wanted two children rather than one child. 10) In the family planning practice, the rate of practice were 41.9% in breast feeding, and 58.1% in artificial feeding respectively. In the case of breast feeding, the using rate of family planning practice in men was higher than in women.

  • PDF

정밀나사 비전검사시스템용 자동공급장치 진동특성의 해석 (Vibration Analysis for a Feeding Unit of Vision Inspection System of Precision Screws)

  • 서예린;박근;김성걸;나승우
    • 한국생산제조학회지
    • /
    • 제20권4호
    • /
    • pp.446-451
    • /
    • 2011
  • Recent trends for the miniaturization and weight reduction of portable electronic parts have driven uses of subminiature components. Assembly of the miniaturized components requires subminiature screws of which pitch sizes are micrometer scale. To produce such subminiature screws with high precision threads, not only a precision forming technology but also a high-precision measurement technology is required. The present study covers the development of a vision inspection system for precision screws for the automatic measurement of subminiature screws with high speed and reliability. In this study, the feeding unit that transfers the subminiature screws to the inspection unit is investigated through finite element(FE) analysis. The vibration characteristics of the feeding unit are predicted through FE analyses, from which we can determine whether the subminiature screw can be stably fed into the inspection unit or not. The effects of several design parameters on the vibration characteristics are also discussed.

플라스마 아크 紛體肉盛法에 의한 Al 合金의 硬化厚膜 合金化層의 形成 (Formation of Thicker hard Alloy Layer on Aluminum Alloy by PTA Overlaying with Metal Powders)

  • 박성두;이영호
    • Journal of Welding and Joining
    • /
    • 제11권2호
    • /
    • pp.74-85
    • /
    • 1993
  • Effect of Si metal powders addition with the plasma transferred arc(PTA) overlaying process on characteristics of the alloyed layer in aluminum alloy(A5083) has been investigated. The overlaying conditions were 175-250A in plasma arc current, 500mm/min in travel speed, the 5-20g/min in powder feeding rate. Main results obtained are summarized as follows. 1)Sufficient size of molten pool on surface of base metal was required for forming an alloyed layer; in a fixed travel, the formation of alloyed layer with clear and beautiful surface depend upon the plasma arc current and powder feeding rate; the greater plasma arc current and the smaller powder feeding rate were, the better bead was formed. Optimum alloyed conditions by which an excellent alloyed bead obtained was 225A in plasma arc current. PTA process made it possible to form an alloyed layer with up to 67wt% Si. 2)Microstructure in the alloyed layer was in accord with prediction from the Al-Si phase diagram 3)The hardness of the alloyed layer increased in proportion to Si content. 4)As volume fraction of primary Si increased, the specific wearness of the alloyed layer was significantly improved. However, no further improvement was found when the volume fraction was greater than about 30%. 5)Utilizing the PTA process, a crack free alloyed layer with maximum hardness of about Hv 310 could be obtained.

  • PDF

이유체노즐의 액체이송공기 공급방법에 따른 어뎁터 내부유동특성에 관한 해석적 연구 (Effects of Carrier Air Supplying Parameter on the Internal Flow Characteristics of an Adaptor in Two-Fluid Nozzle)

  • 박설혜;조민호;김덕진;이지근;노병준
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.65-70
    • /
    • 2008
  • The numerical simulation on the internal flow characteristics of the adaptor in a two-fluid nozzle has been performed to investigate the effects of carrier air supplying parameters using a commercial code. The four adaptor models with the different positions in the carrier air supplying port were considered at the fixed conditions of urea-water solution and carrier air supplying. As the results from the numerical analysis, the internal pressure of the adaptor was varied with the port position for carrier air supplying, and it shows lower pressure value than the atmospheric pressure. Consequently, the flowrate of urea-water solution issuing from the feeding injector with the adaptor varied up to 30% with the port positions for the carrier air supplying. When the carrier air is supplied from the side from the feeding injector axis and the upper part from the feeding injector tip, the flowrate of urea-water solution issuing from the feeding injector with the adaptor show higher value than other carrier air supplying conditions.

  • PDF

모유영양의 실시 시간에 영향을 주는 생리적.사회행동적 요인 분석 (Research on Biological and Sociobehavioral Factors Affecting Determinants of Breast Feeding Duration)

  • 안홍석
    • Journal of Nutrition and Health
    • /
    • 제28권4호
    • /
    • pp.331-344
    • /
    • 1995
  • The process of breast feeding was investigated from the 36th week of pregnancy to 12 weeks postnatal, in order to analyze the factors affecting breast feeding duration and provide the basic data on an education program for successful breast feeding. The general characteristics of study group had no marked effects on the breastfeeding duration. The young and highly condition during pregnancy and the degree of morning sickness affected the practice of breastfeeding. In the study of prenatal sociobehavioral factors, intended duration affected the breastfeeding duration, and the maternal perception that breastfeeding is good for weight loss after delivery as well as infant formula milk is not as good as breast milk, led to successful breast feeding. Among the postnatal biological factors, the duration of gestation affected the breast feeding. Among the postnatal biological factors, the duration of gestation affected the breastiffeding outcome. In the case of early parturition, breastfeeding rate was low. Among the postnatal biocultural factors, time of first feed, milk volume and maternal perception of infant's sucking ability affected the bresatfeeding duration. From these result, it is suggested that an education program such as participation of nursing class to the pregnant women should be provided for successful breastfeeding.

  • PDF

자폐 스펙트럼 장애 아동의 섭식장애: 문헌 고찰 (Feeding Disorders in Autistic Spectrum Disorders)

  • 민경철;신진용;김은혜
    • 대한감각통합치료학회지
    • /
    • 제21권3호
    • /
    • pp.79-102
    • /
    • 2023
  • 목적 : 자폐 스펙트럼 장애(Autistic Spectrum Disorders, 이하 ASD)는 비전형적 감각 적응, 의사소통 문제, 상동 행동 등이 특징인 발달 장애로 섭식장애가 흔하게 동반된다. ASD 아동의 섭식장애는 감각, 구강운동, 행동, 인지, 사회성 등 다양한 원인으로 발생하며 주요 증상으로는 까다로운 먹기, 선택적 먹기, 음식 거부, 새로운 음식 거부, 음식 다양성 제한, 음식 혐오 등 다양하다. 또한 건강 및 영양 섭취 문제, 섭식 발달, 섭식 관련 사회성, 가족과 보호자의 스트레스 등 다양한 문제가 동반되기도 한다. ASD 아동의 섭식장애는 출생 후부터 나타날 수 있으며 일반적으로 진단이 이루어지는 3세 이전에 발생하기 때문에 적절한 중재 제공 전 공백이 발생할 수 있다. 보통 섭식장애 증상은 연령이 증가할수록 감소되는 경향이 있으나 증상 자체는 남아 있는 경우가 많아서 조기 평가 및 중재, 지속적인 확인이 필요하다. 본 연구에서는 ASD 아동의 섭식장애 특성과 영향을 주는 요인, 중재법에 대한 일반적인 내용을 문헌 고찰을 통해 확인하였다. 결론 : ASD 아동의 섭식장애 중재로는 감각 기반 중재와 행동 기반 중재가 일반적이다. 감각 기반 중재는 음식 민감성, 행동 기반 중재는 음식 선택성에 효과적인 방법이다. 또한 ASD 아동의 섭식장애 증상이 다양한 만큼 감각 및 행동 기반 중재를 기본으로 놀이와 참여, 구강운동, 식이와 일상생활까지 포함된 종합적인 접근이 필요하다. 그러나 아직 ASD 아동의 섭식장애 중재를 위한 적절한 평가와 중재 프로토콜 및 가이드라인이 부족한 상황으로 보다 체계적인 이해를 바탕으로 한 복합적인 접근이 필요하다. 작업치료사 등 연하재활 전문가는 종합적인 이해를 바탕으로 ASD 아동의 섭식장애 해결을 위한 적절한 평가 및 중재를 제공해야 할 것이다.

제한 급여 방법이 비육돈의 성장, 도체특성 및 경제성에 미치는 영향 (Effects of Restricted Feeding Method on Growth Performance, Carcass Characteristics and Economic Efficiency in Finishing Pigs)

  • 민예진;정현정;김기현;김조은;유동조;정용대;김영화;김두완;최요한
    • 한국산학기술학회논문지
    • /
    • 제20권11호
    • /
    • pp.394-401
    • /
    • 2019
  • 본 실험은 제한 급여에 따른 비육돈의 성장, 도체특성 및 경제성을 평가하기 위하여 수행하였다. 공시동물은 개시체중이 평균 81.52±1.11 kg인 3원 교잡종(Landrace×Yorkshire×Duroc)의 비육돈 24두를 사용하였으며, 2처리 12반복, 반복당 1두씩 완전임의 배치하여 27일간 진행하였다. 본 실험의 처리구는 무제한 급여(AF, ad libitum feeding)와 제한 급여(RF, restricted feeding)로 나누었으며, 제한 급여에서 증량이 필요한 경우 하루 전날 급여한 양의 10% 수준에서 증량하였다. 사양성적에서 RF의 일일사료섭취량이 AF에 비해 유의적으로 개선되었으나(p<0.001), 일당증체량과 사료효율은 처리구간의 유의적인 차이가 나타나지 않았다. 도체특성에서 도체중과 등지방두께는 AF와 RF간의 유의적인 차이가 나타나지 않았다. 도체등급에 따른 경제성 평가에서 두당 총 지육단가는 AF와 RF간의 유의적인 차이가 나타나지 않았다. 사료비에 따른 경제성 평가에서 RF의 총 사료섭취량과 총 사료섭취비가 유의적으로 낮게 나타났으나(p<0.001), 1 kg 증체 사료비는 AF와 RF간의 유의적인 차이가 없었다. 본 연구결과를 종합해보면 비육기 제한 급여는 무제한 급여에 비해 총 사료섭취량과 총 사료섭취비를 개선시켜 사료비를 저감시킬 수 있음을 시사한다.

영유아 영양의 제요인이 질병이환에 미치는 영향 (The Effect of Several Factors in Infant Nutrition on Disease Affection)

  • 장혜순
    • 한국식품영양과학회지
    • /
    • 제23권5호
    • /
    • pp.757-766
    • /
    • 1994
  • The survey was conducted to investigate several factors affecting the disease outcome with 116 infants aged 10 to 24 months residing in Kunsan city, Cheonbuk province . General characteristics, weaning practice , nutrient intake and the actual state for affecting disease were studied. Among many factors, mother's educational status was found to be the most influencing factor for affecting the disease outcome analyzed by oneway ANOVA. The exposure index disease, cold and diarrrhea, against mother's education were analyzed to find out the major factors for disease outcome. The education group up to middle school graduates, mother's job , nutrients supplements, feeding method, sex of baby were the factors, for the high school graduates, job , nutrients supplements were the causes, and the group graduated from the college the above grade mother's health state was the most important factor for the baby exposing to the disease. The disease outcome decreased when the bottle feeding was replaced by breast feeding, sufficient nutrients supplementation was recommended , and health care for mother during pregnancy was strongly advised.

  • PDF

유전알고리즘과 퍼지추론시스템의 합성을 이용한 정수처리공정의 약품주입률 결정 (Determination of dosing rate for water treatment using fusion of genetic algorithms and fuzzy inference system)

  • 김용열;강이석
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.952-955
    • /
    • 1996
  • It is difficult to determine the feeding rate of coagulant in water treatment process, due to nonlinearity, multivariables and slow response characteristics etc. To deal with this difficulty, the fusion of genetic algorithms and fuzzy inference system was used in determining of feeding rate of coagulant. The genetic algorithms are excellently robust in complex operation problems, since it uses randomized operators and searches for the best chromosome without auxiliary information from a population consists of codings of parameter set. To apply this algorithms, we made the look up table and membership function from the actual operation data of water treatment process. We determined optimum dosages of coagulant (PAC, LAS etc.) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.

  • PDF