• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.325-330
• /
• 2018

In this paper, we investigated the impedance method for searching fault detection point in case of an accident in the AC electric railway AT feeding system. For this purpose, simulation circuit modeling and prototype hardware are made based on the known numerical analysis. As a result of simulation modeling of the feeding system based on the numerical analysis of the impedance method confirmed that the modeling was properly implemented with an average error rate of 0.07%. Also, as a result of fault event by hardware simulator, it was confirmed that the breaker operation time is shortened and the fault current is decreased while the voltage is close to the supply voltage in the transient state as the point of the fault accident moves away from the substation(SS).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1708-1714
• /
• 2011

AT feeding system of the electric railway system is installed every about 10km at between the feeder and catenary in parallel and the mid-point of the transformer is connected to the rail The supply voltage of this system is doubled than rolling stock voltage. So the voltage drop is smaller than usual. And the other merit of this system is the decreasing inductive disturbance to the communication line because of the reduced current in rail which runs reversed in a point of view of rolling stock. Also, ATP(Auto Transformer Post) is installed to reduce the voltage drop and to mitigate the inductive disturbance, but still now the proper distance between the ATP and AT feeding system is not established which ranges from 2 to 10[km]. The stable result of simulation(which is set that the end of the line AT is installed) to the voltage drop and inductive disturbance can not analyzes the effect to the supply system due to the ATP. This paper analyzes the effect to the system depending on the location of ATP by forecasting the voltage drop and inductive disturbance.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.177-185
• /
• 2001

This paper describes a machine-vision-based prototype system for automatically feeding engine-mount parts to a swaging machine which assembles engine mounts. The system developed consists of a robot, a feeding device with two cylinders and two photo sensors, and a machine vision system. The machine vision system recognizes the type of different parts being fed from the feeding device and estimates the angular difference between the inner-hole center of the part and the point predetermined for assembling. The robot then picks up each part and rotated it through the estimated angle such that the parts are well assembled together as specified. An algorithm has been developed to recognize different part types and estimate the angular difference. The test results obtained for a set of real specimens indicate that the algorithm performs well enough to be applied to prototype system.

• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.128-131
• /
• 2001

Laser cladding processing allows rapid transfer of heat to the material being processed with minimum conduction into base metal, resulting in low total heat input. The effects of $CO_2$ laser cladding with powder feeding on mechanical properties of VERSAlloy were studied. Their low melting point (under 1093$^{\circ}C$) enables overlays to be applied with minimum dilution and base metal distortion. Experiment results indicated that powder feeding speed and quantity were important for laser cladding with powder feeding. The powder feeding speed should be adapted according to cladding speed for good shaping of clad layer. The effect of heat on the HAZ size can be limited and the growth of grain size of HAZ size was not serious.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.2
• /
• pp.23-43
• /
• 2002

Purpose: The purpose of this study is to examine and analyse factors related to the actual status and practice of breast-feeding during an infant period to grasp elements detrimental to breast-feeding and, therefore, provide basic information useful for its effective practice and encouragement. Method: From April 1 to June 30, 2001, this study was carried out with the mothers of 337 who were 6 months old, as of the surveyed date, of infants born in 2002 and registered in Seongju-gun Public Health Center, Gyeongsangbug-do Province. The method for its survey included both of the visiting and telephone interviews, and questions were mainly about the mothers' general characteristics(3 questions), infants' general characteristics(3 questions), environmental characteristics of infant delivery( 4 questions), support to breast-feeding(4 questions), understanding of breast-feeding(5 questions), and feeding type during the 1 to 6-month period after birth. Result: 1. The feeding type during the I-month period after birth showed that the breast-feeding accounted for 42.4%, which was higher than dry milk-feeding(30%) or mixed milk-feeding(26.8%). However, it began to be lower than the dry milk-feeding from the 2-month period after birth. During the 6-month period, the breast-feeding accounted for 28.6% which was lower than 56.5% of the dry milk-feeding. 2. The mothers who were encouraged by their delivery clinic to and were educated to breast-feed infants accounted for 55.4% and 41.4%, respectively, which were relatively low. The understanding of breast-feeding indicated that the responses were positive from the view point of mother ＆ infant health, but negative from mother's physical form. 3. It was shown that the lower the educational background of mother(p〈0.05) and the higher the unemployment of mother(p〈0.001), the higher the positive understanding of breast-feeding, and that the higher the entire support to breast-feeding, the more positive their understanding. 4. It was also shown that the lower the educational background of mother(p〈0.05), the higher the unemployment of mother(p〈0.001), the more the experience in breast-feeding at a delivery clinic(p〈0.01) and the faster the initial feeding(p〈0.001), the higher the rate of breast-feeding. 5. The factor having an effect on breast-feeding included a delivery clinic's encouragement to breast-feed(p〈0.001), understanding of breast-feeding(p〈0.01), father's comment on feeding method(p〈0.05) and mother's employment(p〈0.05). Discussion: In order to encourage the breast-feeding, as shown above, it is required, fist of all, to offer pregnant women an education about importance and excellence of breast-feeding and its appropriate method before delivery in advance to result in a positive comprehension of the breast-feeding. To do that, both the publicity activities and program development designed to encourage the breast-feeding must be performed in advance at the government level. In addition to that, the mother-infant space as ‘rooming-in’ available for breast-feeding immediately after delivery must be prepared on the basis of legal and administrative support. Finally, female employees' leave after childbirth must be performed for the purpose of productive welfare and circumstances also be prepared for breast-feeding, such as a children's home at work.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.85-87
• /
• 1994

Feeding biological cells one by one is the key point in the manipulation of cells. The conventional valve systems have many difficulties in feeding cells one by one, because they shut the whole flow of fluids when they are closed and have possibilities of breaking the fragile cells. They need some other equipments for continuous supply of suspension and to protect the cells. We design a check valve for feeding biological cells one by one using polyimide all the silicon substrate. The cells are fed by hydraulic pressure through the isotropically etched cavity. When the suspension flows continuously along the channel the valve is bent by hydraulic pressure and a cell is fed to the outlet. We have studied a cell fusion device fabricated with polyimide and electroplating. If the designed check valve is located in front of the cell fusion device it is helpful to fuse two different kinds of cells.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.265-272
• /
• 2000

Feasibility of the self-TMR mixing/feeding system for dairy farm in Korea was analyzed by comparing with a traditional feeding system. The total operating cost of self-TMR feeding system decreased with an increase of farm size. However, the cost was higher than that of traditional feeding system because of its high purchasing cost of TMR mixer as an initial investment. Profit per unit input of the TMR feeding system became greater over the traditional system when the farm size is larger than 17 heads due to more and better milk production. The profitable discrepancy became bigger as dairy farm size increases.

• Biomolecules & Therapeutics
• /
• v.5 no.1
• /
• pp.43-47
• /
• 1997

Effects of Bupleuri Radix, Paeonie Radix or Uncariae Ramulus et rncus on experimental yperlipidemia were studied. Hyperlipidemia was induced on male Wistar rats by feeding them on high holesterol diet for one week, as previously described by the authors. Blood lipid profile was verified on these ats by measuring total cholesterol(TC), triglyceride(TG), high density lipoprotein cholesterol(HDL) and low ensity lipoprotein cholesterol(LDL). Then, the rats were followed by feeding normal diet. At the same time, ethanol extracts of the three individual herb medicines were orally administered to the rats for 4 weeks and the parameters above mentioned were monitored. Methanol extract of 5Bupleuri radix reduced the TC value significantly at 2 week point and Paeoneae Radix reduced the TC value at 4 week point in compare to control group, suggesting the antihyperlipidemic effect of the two herbal medicines in vivo. The extract of Uncariae Ramulus et Uncus however did not show antihyperlipidemic effect in our experiment.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.43-50
• /
• 2009

This paper deals with a novel solid state controller (NSSC) for an isolated asynchronous generator (IAG) feeding 3-phase 4-wire loads driven by constant power prime movers, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of the asynchronous generator. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 2-leg voltage source converters (CC- VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The neutral point of the load is created using aT-configuration of the transformers. The IAG system is modeled in MATLAB along with Simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of the isolated generating system consisting of NSSC and IAG driven by uncontrolled pico hydro turbine and feeding 3-phase 4-wire loads.

• Microbiology and Biotechnology Letters
• /
• v.27 no.4
• /
• pp.327-332
• /
• 1999

A highly productive fed-batch fermentation process was developed for the production of L-ornithine by using a new stabilized strain, Breviabcterium ketoglutamicum BK52. Fed-batch cultures with a continuous feeding of the complex medium were conducted on various operating conditions. The optimal concentration of phosphate in the complex medium was 2.1g/L. The optimal feeding rate of L-arginine was 0.028g/L/hr. The optimal feeding point of the complex medium was determined to be at 40 OD of the cell mass. The final L-ornithine concentrations within 64hrs of cultivation in 5 and 50 liter fermenters were 73g/L and 71g/L, respectively. The maximum overall L-ornithine productivity was 1.14g/L/hr which was about 2 times higher than that of the conventional fed-batch culture with intermittent feeding. The overall productivity of the fermentation system is remarkably improved by employing the optimized conditions, and it offers a significant potential for industrial application.