• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.4
• /
• pp.174-179
• /
• 2002

In this paper, the modified simulation algorithms of the Auto Transformer (AT) feeding electric train system were proposed. To obtain terminal voltage of train by using equivalent circuit or the AT feeding system, the iterative method is proposed for which determine the train voltages. The train voltages are iteratively calculated from the system voltage drop and line impedance. In the carte study, the proposed method is verified from actual operation data of the Kwa-Chon line. Also it is verified that the proposed method can be extent to the multi-train simulation tool. The terminal voltage of the multi-train can be calculated by using superposition principle and it is easily applied to the proposed method. Therefore, the proposed method can be a solution for the complexity of the circuit analysis in the existing methods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1354-1363
• /
• 2010

This study compared the effect of four different feeding methods for gestating gilts on reproductive performance and growth of their progeny. A total of 40 F1 primiparous sows (Yorkshire${\times}$Landrace) were allotted to four treatments in a completely randomized design (CRD). For treatments, gestating period of sows was divided into three trimesters (0-35 d, 36-90 d and 91-110 d) and different amounts of feed were provided to each treatment group by Flat, Down-Up-Down (DUD), Up-Down-Up (UDU) and Down-Up-Up (DUU) feeding methods. The experimental diet was formulated to meet or exceed the standards of NRC (1998). Body weight gain of gestating gilts from d 0 to 110 was affected by feeding method (p<0.05). When gilts were fed constant feed ration (Flat feeding), less body weight loss was observed during lactation (-0.9 kg, p<0.05) and desirable backfat thickness (average 19.5 mm) was acquired at 110 days of gestation. Feed intake of lactating sows tended to be greater (4.22, 3.60, 3.97 and 4.13 kg/d, p>0.05) as sows in Flat feeding treatment had lower backfat thickness during gestation compared with other treatments (p<0.05). When gestating gilts were fed higher amount of feed during mid-trimester, the number of stillborn (1.4 piglet per litter, p<0.05) and mummies (0.8 piglet per litter, p = 0.25) were increased compared to other treatments. Feeding methods for gestating gilts had no effect on litter weight and gain of litter weight during the nursing period. Flat feeding method resulted in decreased plasma glucose concentration at 7 d postpartum (p<0.05), and increased LH concentration at 21 d postpartum (p<0.01) compared to other treatments. These results suggested that higher feed intake of gestating gilts resulted in detrimental effects on body condition and reproductive performance of sows. When gestating gilts consumed constant feed during gestation (2 kg/d), better reproductive performance and less body weight loss in lactation were observed because sows consumed more feed during the whole lactation period. Consequently, Flat feeding will be a desirable feeding strategy for gestating gilts to maximize reproductive performance, and better body condition of sows without any negative influence on the growth of their progeny.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.377-398
• /
• 1993

A survey of infant practices was conducted to provide information on which to base planned nursing interventions. The subjects were a convenience sample of 168 mothers visiting out - patients departments of five general hospitals and one public health center in Seoul for immunizations or treatment for common colds for their infants from two to 12 months of age. Data collection was carried out from July 8th to September 30th, 1991 using a questionnaire of 84 questions, 31 on the type of feeding, 22 on supplementary feeding and 21 on demographic infer mation. The results are summarized as follows : 1) The type of feeding was primarily artificial feed-ing (63.1%), followed by mixed feeding (22%) and breast feeding (14.9%) of the 59 mothers expecting during pregnancy to breast feed, 54. 2% changed artificial feeding and 30.5% went on to breast feed as they had expected. For mothers expecting to continue breast feeding over seven months. only one infant was being breast fed for over seven months. 2) For the 106 mothers using artificial feeding, 70. 8% hed attempted breast feeding, 64% of them for less than a month. Breast milk had been suppressed by for medication (38.7%) : 34.9% had used no specia] means. 3) The major reasons for replacing breast feeding with artificial feeding were the infants' demand for more milk (47.2% ) and insufficient supply of breast milk (49.3％). 4) Most mixed feeding was started at the age of one to three months (59.5%). Only 34.4% gave an artificial feeding after breast feeding : most (46%) alternated breast feeding with artificial feeding. On the whole, the motive for mixed feeding was the lack of breast milk (70.3%). 5) Many mothers (81.8%) were adding vitamin or mineral supplements to artificial milk and 51.5% were adding something to faciliate digestion. As for the method of sterilizing milk bottles and nipples, 56% had sterilized them together in boiling water from the beginning : 27% were just washing the bottles after boiling only once initially when measuring artificial milk powder, 31. 5% of the mothers over filled the measuring spoon rather than to the level. 6) The mother's occupation was related to her way of feeding. Mothers at home full time did more breast feeding than mothers employed outside the home. (x²=5.72, p=〈0.05). 7) Most mothers began supplementary food, from three to four months (48.8%) : 11.2% began later than seven months. Supplementary food was given between milk feedings by 67.2% of the mothers : 19.2% gave it before a milk feeding. Some mothers(26.4%) made their own supplementary food : 19.2% used ready - made supplementary food products for convenience. Recommendations for nursing interventions included : 1. Prenatal education about the advantages of breast feeding and breast care, and home visits after delivery for counselling related to breast feeding. Correct preparation of artificial feeding methods need to be taught in both pre & postnatal periods. In addition, specific education about supplementary feeding needed. 2. Further research is indicated about the Perceived lack of supply of breast milk and about the effectiveness of nursing interventions to Promote breast feeding.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1008-1013
• /
• 2003

This paper concerns the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system consisted of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.896-903
• /
• 2004

This paper proposes the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high-precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system composed of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• 한국기계연구소 소보
• /
• s.18
• /
• pp.99-104
• /
• 1988

The method of simulation for ballistic feeding mechanical system is presented. Taking photograph of roller drived by a force of explosion, searches the motion of roller. The algorithm that a motion of roller is converted into a motion of cam is presented. Using central difference method, the angular velocity and acceleration of cam is evaluated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.1
• /
• pp.57-65
• /
• 2015

The purpose of this study was to examine dietary habits and nutrient intakes according to feeding method during infant period in elementary school students. Subjects were 1,251 elementary school students. Subjects were divided into three groups, breast-fed group (N=508), formula-fed group (N=397), and mixed group (N=346), according to feeding method during infant period. The questionnaire was composed of general characteristics, dietary conditions during infant period, dietary behaviors, and dietary intakes and was completed by children and children's parents. Average age, height, weight, and body mass index were 11.6 years, 139.0 cm, 34.6 kg, and $17.8kg/m^2$, respectively. The formula-fed group showed a smaller proportion of subjects with colostrum feeding (P<0.001) compared to the breast-fed and mixed groups. Frequency of eating snacks was significantly higher in the mixed group than in other groups (P<0.05). There was no significant difference in dietary habit total score and nutrient intakes according to feeding method during infant period. Feeding method in during infant period was associated with dietary habits (milk and vegetable intake habits) up to growth period of elementary school. A longitudinal and systematic study is needed to clarify this relationship.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.325-330
• /
• 2018

In this paper, we investigated the impedance method for searching fault detection point in case of an accident in the AC electric railway AT feeding system. For this purpose, simulation circuit modeling and prototype hardware are made based on the known numerical analysis. As a result of simulation modeling of the feeding system based on the numerical analysis of the impedance method confirmed that the modeling was properly implemented with an average error rate of 0.07%. Also, as a result of fault event by hardware simulator, it was confirmed that the breaker operation time is shortened and the fault current is decreased while the voltage is close to the supply voltage in the transient state as the point of the fault accident moves away from the substation(SS).

• Women's Health Nursing
• /
• v.6 no.2
• /
• pp.203-217
• /
• 2000

The purpose of this study was done to explore the pregnant women's decision-making process about their infants feeding method. Data collection involved the in-depth unstructured interviews with 12 participants from January 1998 to January 1999. Data analysis was done by the grounded theory method. The 112 concepts, 29 sub-categories were confirmed in the analysis. The sub-categories were again grouped into 14 categories: expectation, situational condition, inevitability of breast-feeding, social recognition, self-awareness as mother, harmony, consideration, pursuit of ease, effect of external environments, lack of knowledge, hardening, the best choice, control, and bargain. " Adjustment through recognizing of motherhood" was the key category that was related to all categories. "Adjustment through recognizing of motherhood" was a process in which the mother became aware of mothering and sharing, and in which she considered herself or infant's needs and their priorities. This research will help nurse to understand mother's needs better. Therefore, nurse will be able to assist mother making the best decision for herself and her infant.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.504-510
• /
• 2016

In general, a fault locator is installed in Sub-Station of AT(Auto-transformer) feeding system to estimate the fault location and to protect the Korean AT feeding system. Since the line impedance characteristic is different to normal 3-phase transmission line, we need particular modification factors, which can be calculated using fault location recording data, to estimate the accurate fault location. Up to recently, forcible ground test has been used to calculate the modification factors of the fault locator. However, large amount of current is occurred when the forcible ground test is performed, and this current affects to adjacent equipments. Therefore, we proposed a novel calculation method of modification factors, arbitrary trip test, using boosting current of the operating electric train. Through several field test, we confirmed that modification factors for fault locator can be easily calculated by using proposed method. Moreover, we verified the accuracy and stability of the proposed calculation method.