• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.163-169
• /
• 1998

In this paper, we consider the problem of designing H$\infty$ state feedback controller for the generalized time systems with delayed states and control inputs in continuous and discrete time cases, respectively. The generalized time delay system problems are solved on the basis of LMI(linear matrix inequality) technique considering time delays. The sufficient condition for the existence of controller and H$\infty$ state feedback controller design methods are presented. Also, using some changes of variables and Schur complements, the obtained sufficient condition can be rewritten as a LMI form in terms of transformed variables. The propose controller design method can be extended into the problem of robust H$\infty$ state feedback controller design method easily.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.343-346
• /
• 2000

When a feedback bridging fault is activated, oscillation may be generated in output signal lines. If the oscillation is generated, the fault may not be detected by logic testing. Thus, in the past we proposed a current sensor to detect feedback bridging faults by supply current testing. The sensor circuit design requires the maximum frequency of oscillation which is generated when feedback bridging fault is excited as a specification. In this paper, an estimation method of the oscillation frequency is proposed. Also, it is shown by some experiments that the frequency obtained by the method can be used for the sensor design.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.1028-1037
• /
• 2014

To optimize controller design and improve static and dynamic performances of three-phase four-leg inverter systems, a compound control method that combines state feedback and quasi-sliding mode variable structure control is proposed. The linear coordinate change matrix and the state variable feedback equations are derived based on the mathematical model of three-phase four-leg inverters. Based on system relative degrees, sliding surfaces and quasi-sliding mode controllers are designed for converted linear systems. This control method exhibits the advantages of both state feedback and sliding mode control. The proposed controllers provide flexible dynamic control response and excellent stable control performance with chattering suppression. The feasibility of the proposed strategy is verified by conducting simulations and experiments.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.240-250
• /
• 2011

To enable a relevance feedback paradigm to evolve itself by users' feedback, a reinforcement learning method is proposed. The feature space of the medical images is partitioned into positive and negative hypercubes by the system. Each hypercube constitutes an individual in a genetic algorithm infrastructure. The rules take recombination and mutation operators to make new rules for better exploring the feature space. The effectiveness of the rules is checked by a scoring method by which the ineffective rules will be omitted gradually and the effective ones survive. Our experiments on a set of 10,004 images from the IRMA database show that the proposed approach can better describe the semantic content of images for image retrieval with respect to other existing approaches in the literature.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.5
• /
• pp.18-26
• /
• 1979

This paper extends some well-known system theories on algebraic matrix Lyapunov and Riccati equations. These extended results contain two point boundary conditions in matrix differential equations and include conventional results as special cases. Necessary and sufficient conditions are derived under which linear systems are stabilizable with feedback gains derived from periodic two-point boundary matrix differential equations. An iterative computation method for two-point boundary differential Riccati equations is given with an initial guess method. The results in this paper are related to periodic feedback controls and also to the quadratic cost problem with a discrete state penalty.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.19-27
• /
• 2003

It is well known that one can easily design a high-gain adaptive output feedback control for a class of nonlinear systems which satisfy a certain condition called output feedback exponential passivity (OFEP). The designed high-gain adaptive controller has simple structure and high robustness with regard to bounded disturbances and unknown order of the controlled system. However, from the viewpoint of practical application, it is important to consider a robust control scheme for controlled systems for which some of the assumptions of output feedback stabilization are not valid. In this paper, we design a robust high-gain adaptive output feedback control for the OFEP nonlinear systems with uncertain nonlinearities and/or disturbances. The effectiveness of the proposed method is shown by numerical simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.337-341
• /
• 2003

This paper provides a design method for a dynamic output feedback controller which stabilizes a class of linear time invariant systems. We suppose all the states of the given system is not measurable and only the outputs are used to stabilize the system. The systems considered cannot be stabilized by a static output feedback only. In the scheme we first assume that the given system can be stabilized by a state feedback composed of its output, velocity of the output and its higher order derivative terms. Instead of using the derivatives of the output, however, a dynamic system is constructed systematically which replaces the role of the derivative terms. Then, a high-gain output feedback stabilizes the composite system together with the newly constructed system. The performance of the proposed control law is illustrated in the comparative simulation studies of a numerical example with an observer-based control law.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.1001-1004
• /
• 2010

Acoustic feedback and background noise variation can degrade the performance of an active noise control (ANC) system. In this paper, nonlinear ANC using a non-parametric VSS-NLMS (or NPVSS-NLMS) algorithm and online feedback path modeling is proposed, whereby the conventional linear ANC with online acoustic feedback-path modeling is further extended to nonlinear Volterra ANC with a linear acoustic feedback path. In particular, the step-size of the NPVSS-NLMS algorithm is controlled to reduce the effect of background noise variation in the ANC system. Simulation results demonstrate that the proposed approach yields better nonlinear ANC performance compared with the conventional nonlinear ANC method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.145-148
• /
• 1990

In this paper, the problem of designing a feedback controller for a robotic manipulator, which is activated by a D.C. motor through a gear train and a flexible shaft or chain, is considered. When the response of the closed loop control system is relatively slow, a satisfactory controller may be designed as a PID controller. As the speed of the control system increases, however, the spring effect of the linkage becomes profound, and as a result, the transient response exhibits a substantial oscillation. To eliminate this oscillation, it is necessary to design the controller based on at least a fourth order system model. This, in turn, requires the feedback of the entire state variables. In practice, however, only the position of the manipulator and the velocity of the motor are readily measurable. The state variable reconstruction method or a state observer cannot be used because of the system nonlinearities such as the Coulomb frictions. In this study, an alternative controller, which is based on delayed feedback of the output variable only, is proposed, and a successful delayed feedback controller is designed and implemented on an actual experimental manipulator.

• Journal of Korean Physical Therapy Science
• /
• v.5 no.3
• /
• pp.691-696
• /
• 1998

Objectives : Asymmetrical weight bearing during standing has been identified as a common problem in persons with hemiplegia. This study examined the effect of auditory and visual feedback on symmetric weight bearing with hemiplegia. Method: The intervention program was instituted for 10 min each day with a total of twelve treatment sessions. The machine which was used for this study is the Weight Balancer, OG GIKEN, WB-202, Japan Result: There was a significant improvement of symmetric weight distribution in auditory feedback group whereas the visual feedback group disclosed some improvement but not significantly. There was no significant change in control group. Conclusion: Results of this study suggest that an auditary feedback group can be more effective than visual feedback group or control group in helping the persons with hemiplegia achieve symmetric stance.