• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.53-60
• /
• 1998

In this study, it is experimented to find factors effecting surface roughness using the system of experiments. in the mirror surface finishing system. (1) The film feed and oscillation frequency in $40{\mu}m$ abrasive film, grinding speed in $30{\mu}m$, and machining time in $15{\mu}m$15 are the main factors effecting the surface roughness. (2) Applying the optimal finishing condition to $40{\mu}m$, $30{\mu}m$, $15{\mu}m$ abrasive finishing film in sequence, it is possible to obtian about Ra 10 nm surface roughness on SM45C workpiece. (3) Application of the system of experments to the micro abrasive grain film finishing was very effective method in the extraction of main factor and optimal condition.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.22-27
• /
• 2020

Ring rolling is a type of forging for manufacturing large-diameter rings. Products manufactured by ring rolling are useful in the aerospace industry because of their excellent mechanical properties and high dimensional accuracy. The major components of the ring rolling process are a mandrel and main roll that shape the inside and outside of the ring, an axial roll that shapes the top and bottom of the ring, and a side rolls to position the ring. In this study, a simulation of ring rolling using finite element method (FEM) was performed. DEFORM, a commercial machining analysis program, was used. Based on the simulations, the mandrel feed force required for machining and the drive torque of the main roll were predicted. It was also possible to identify the metal flow caused by machining.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.245.2-245
• /
• 2002

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.136-144
• /
• 2014

The existing conventional motion controller does not perform well in the presence of nonlinear properties, uncertain factors, and servo lag phenomena of industrial actuators. Hence, a feasible and effective fuzzy self-tuning proportional integral derivative (PID) and feed-forward control scheme is introduced to overcome these problems. In this design, a fuzzy tuner is used to tune the PID parameters resulting in the rejection of the disturbance, which achieves better performance. Then, both velocity and acceleration feed-forward units are added to considerably reduce the tracking error due to servo lag. To verify the capability and effectiveness of the proposed control scheme, the hardware configuration includes digital signal processing (DSP) which plays the main role, dual-port RAM (DPRAM) to guarantee rapid and reliable communication with the host, field-programmable gate array (FPGA) to handle the task of the address decoder and receive the feed-back encoder signal, and several peripheral logic circuits. The results from the experiments show that the proposed motion controller has a smooth profile, with high tracking precision and real-time performance, which are applicable in various manufacturing fields.

• Fisheries and Aquatic Sciences
• /
• 제14권2호
• /
• pp.123-129
• /
• 2011

To determine whether rearing density affects the hypermelanosis on the blind side (ambicoloration) of olive flounders Paralichthys olivaceus, we reared fry with an unpigmented non-eyed (blind) side in duplicate at densities of 150 individuals/$m^2$ (commercial production density: control) and 450 individuals/$m^2$ (high density group) for 90 days in 1-t dark-green fiberglass reinforced plastics (FRP) tank. We recorded feed intake, feed conversion efficiency (FE), growth and survival, and measured the ratios of staining blind-side area (staining area) and ambicolored fish every 30 days. Daily feed intake (DFI), feed conversion efficiency (FE), growth rate, condition factors, and survival rate were calculated at the end of the experiment. Although the FE was higher in the high-density compared to the control, the two density groups showed similar feed intakes, growth, and survival. The ratio of staining area as well as the ratio of ambicolored fish significantly were significantly higher in the high-density group than in the control from days 30 to 60, but significantly increased and evened out by the end of the experiment (P<0.05). In conclusion, we determined that rearing density is not the main cause of the blind-side hypermelanosis, but found that increasing the rearing density can accelerate the ambicoloration in olive flounders.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.96-103
• /
• 1998

With the advance of processing technology , so as to spare fuel, piston heads used in automobile reciprocating engine have complex 3-dimension, with respect to shape such as ovality, profile, eccentricity, offset, recess. Therefore, coming out of the existing process work used master cam. the process work is performed using a CNC lathe. For a precision processing, the processing work is need to make study of high speed feed gear synchronized with the rotative speed of main spindle. And then the high speed feeding system must maintain high dynamic stiffness, high speed and high positioning accuracy . In this paper, in order to achieve high speed cutting tool feeding. The linear brushless DC motor is used for satisfying this process work. The ball bush and turicite is used as the guidance of the feed gear system. Also linear encoders, digital servo amplifiers and controller are used for controlling driving motor. This paper presents the design and simulation of the new tool feed system for noncircular machining.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권6호
• /
• pp.755-768
• /
• 1998

Nitrogen and phosphorus are major nutrients in animal feeds which partially remain in the environment as pollution. In addition, nitrogen and phosphorus along with energy are the main nutrients which determine the feed cost. Any decreases in the levels of these three nutrients can contribute to reducing the pollution problem as well as the cost of feed. The nutrient requirements for chickens in the work here reported should allow for the addition of mixed enzymes (phytases, proteases, glucanases, xylanases and others). Such minimal levels of crude protein in the research results which are here reported are 16% for 0-6 weeks of age, 13.5% for 7-12 weeks of age, 11.5% for 13-18 weeks of age for layer type chicks, 13% for layer, 18% for 0-3 weeks of age broiler and 16.5% for 4-7 weeks of age broiler. These research projects have been done without adding enzyme supplements to their experimental diets. The minimal values of phosphorus, shown as available phosphorus, are 0.25% for pullets, 0.09% for layers and 0.25% for broilers with the addition of phytase. The minimum energy requirement (metabolizable energy) for reducing the feed cost could be summarized as 2,750 kcal per kg feed for pullets, 2,800 kcal for layers and 2,700 kcal for broilers.

• Journal of Microbiology and Biotechnology
• /
• 제21권8호
• /
• pp.861-868
• /
• 2011

A xylanase gene, xyn7c, was cloned from Paenibacillus sp. 12-11, an alkalophilic strain isolated from the alkaline wastewater sludge of a paper mill, and expressed in Escherichia coli. The full-length gene consists of 1,296 bp and encodes a mature protein of 400 residues (excluding the putative signal peptide) that belongs to the glycoside hydrolase family 10. The optimal pH of the purified recombinant XYN7C was found to be 8.0, and the enzyme had good pH adaptability at 6.5-8.5 and stability over a broad pH range of 5.0-11.0. XYN7C exhibited maximum activity at $55^{\circ}C$ and was thermostable at $50^{\circ}C$ and below. Using wheat arabinoxylan as the substrate, XYN7C had a high specific activity of 1,886 U/mg, and the apparent $K_m$ and $V_{max}$ values were 1.18 mg/ml and 1,961 ${\mu}mol$/mg/min, respectively. XYN7C also had substrate specificity towards various xylans, and was highly resistant to neutral proteases. The main hydrolysis products of xylans were xylose and xylobiose. These properties make XYN7C a promising candidate to be used in biobleaching, baking, and cotton scouring processes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.457-463
• /
• 2005

터보샤프트 엔진을 장착한 스마트무인기의 연료시스템을 설계하였다. 개념설계 단계의 설계방법을 기초로 하여 비행체의 상세설계가 진행되면서 기체구조설계로부터 도출된 탱크 배치와 구성설계를 하였다. 또한 연료시스템의 상세설계에 필요한 비행체 및 엔진의 데이터를 도출하여 연료시스템의 주요 구성요소인 연료공급계통, 연료탱크 벤트계통, 그리고 급유계통의 상세 설계를 수행하였다.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.755-760
• /
• 2012

In this study, three dimensional cutting force components and surface roughness appeared in high speed cutting by using tungsten carbide endmill tools implanted ion or not found mutual relations through several analysis of statistical dispersion. It is showed that cutting force(Fx) is affect with spindle speed and feed rate, cutting force(Fy) is affect with spindle speed and ion implantation time and cutting force(Fz) is affect with feed rate in interaction through the statistical method of ANOVA of cutting force and surface roughness, it is analyzed that it is affected of spindle speed and feed rate in surface roughness.