Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of the Effects of Cutting Force and Surface Roughness in the Cutting Conditions of Plasma Source Ion Implantation Tools

플라즈마 이온주입 공구의 가공조건이 절삭력과 표면 거칠기에 미치는 영향 분석

  • 강성기 (한국폴리텍 VII대학 창원캠퍼스 컴퓨터응용기계설계학과)
  • Received : 2012.04.17
  • Accepted : 2012.08.06
  • Published : 2012.10.15
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, three dimensional cutting force components and surface roughness appeared in high speed cutting by using tungsten carbide endmill tools implanted ion or not found mutual relations through several analysis of statistical dispersion. It is showed that cutting force(Fx) is affect with spindle speed and feed rate, cutting force(Fy) is affect with spindle speed and ion implantation time and cutting force(Fz) is affect with feed rate in interaction through the statistical method of ANOVA of cutting force and surface roughness, it is analyzed that it is affected of spindle speed and feed rate in surface roughness.

Keywords

References

  1. Kim, D. H., Kim, J. S., Woo, Y. W., and Lee, H. H., 2007, "A Study on the Performance Evaluation of End Mill Tool Fabricated by Ultra-Fine WC," Transactions of the Korean Society of Manufacturing Technology Engineers., Vol. 16, No. 6, pp. 1-8.
  2. Berdichevsky, Y., Khandurina, J., Guttman, A., and Lo, Y. H., 2004, "UV/ozone Modification of Poly (dimethylsiloxane) Microfluidic Channels," Sensor and Actuat B-Chemical., Vol. 97, No. 16, pp. 402-408. https://doi.org/10.1016/j.snb.2003.09.022
  3. Lee, S., and Voros, J., 2005, "An Aqueous-based Surface Modification of Poly(dimethylsiloxane) (PDMS) with Poly(ethylene glycol)(PEG) to Prevent Biofouling in Microfluid System Applications," Langmuir., Vol. 21, No. 25, pp. 11957-11962. https://doi.org/10.1021/la051932p
  4. Langowski, B. A., and Uhrich, K. E., 2005, "Oxygen Plasma-treatment Effects on Si Transfer," Langmuir., Vol. 21, No. 14, pp. 6366-6372. https://doi.org/10.1021/la046795v
  5. Hellmich, W., Regtmeier, J., Duong, T. T., Ros, R., Anselmetti, D., and Ros, A., 2005, "Poly (oxyethylene) based Surface Coatings for Poly (dimethylsiloxane) Microchannels," Langmuir., Vol. 21, No. 16, pp. 7551 -7557. https://doi.org/10.1021/la0510432
  6. Kang, S. K., Wang, D. H., and Kim, W. I., 2011, "Enhancement of Wear Resistance by Low Heat Treatment and the Plasma Source Ion Implantation of Tungsten Carbide Tool," The Korean Society of Manufacturing Technology Engineers., Vol. 20, No. 2, pp. 121-218.

Cited by

  1. Forming Accuracy Comparison Between Positive and Negative Incremental Forming Al 1050 vol.22, pp.5, 2013, https://doi.org/10.7735/ksmte.2013.22.5.800