• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.437-441
• /
• 2003

The major drawback of the classical microstrip patch antennas Is their narrow band characteristic from 1% to 5%. In this paper, to improve this drawback, we designed the antenna with stacked structure having one drive patch connected with feed line and four identical radiation patches. Resonance is achieved by adjust ing coupling area between one drive patch and four identical radiation patches and changing the size of drive patch or radial ion patches. Used substrate is FR4(${\epsilon}_r$=4.6 and t=1.6mm) and designed center frequency is 2.45GHz. The designed antenna has a wide bandwidth of 380Mhz form 2.333GHz to 2.713GHz(about 15.5%) including ISM band from 2.4GHz to 2.4835GHz.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.257-259
• /
• 1992

Three tropical legumes, very different in growth form, but believed to be of potential value for animal production were evaluated by substituting the leaf meal made from each for lucerne at the level used in a standard diet for growing rabbits (50%). Each leaf meal had a nitrogen content of close to 3.5% and contributed about 60% of the crude protein in the diet. Albizia lebbeck and Clitoria ternatea showed no evidence of toxic or antinutrient effects. The protein digestibility of the complete diets were 66 and 61% respectively, implying a protein digestibility of the leaf of at least 50%. Both species would be suitable for practical production diets for rabbits and should be excellent for ruminants. In contrast, the diet containing Desmanthus virgatus had a protein digestibility of only 40%, implying that only about 15% of the leaf protein was available. The leaves showed marked non-enzymic browning on drying. When dried this species is clearly unsuitable as a feed for rabbits and possibly also for ruminants. However, it may well be valuable as fresh forage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.5
• /
• pp.544-553
• /
• 2002

The recent amount of container freight continuously has been increased, but the low efficiency of container crane causes jamming frequently in transportation and cargo handling at port. It is required that the working velocity and safety are improved by control of moving the trolley as quick as possible without large overshoot and any residual swing motion of container at the destination. In this paper, a LQ controller for a container crane is proposed to accomplish an optimal design of improved control system for minimizing the swing motion at destination. In this scheme a mathematical model for the system is obtained in state space form. Finally, the effectiveness of the proposed controller is verified through computer simulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.1
• /
• pp.13-17
• /
• 2005

We explored a new rough grinding technique on optics materials such as Zerodur. The facility used is a NANOFORM-600 diamond turning machine with a custom grinding module and a range of diamond resin bond wheel. The grinding parameters such as workpiece rotation speed, depth of cut and feed rate were altered while grinding the workpiece surfaces of 20mm in diameter. Surface roughness was measured by Form Talysurf series2. Our target is to define grinding conditions producing the surface roughness smaller than $0.2{\mu}m$ Ra.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.109-117
• /
• 2016

For efficient deburring of burrs that form inside mechanical parts after drilling, new special deburring tool was developed specifically for the burr found at intersecting holes. In this paper, the process for finding ideal cutting conditions has been carried out to identify the efficient performance of deburring using a new tool. The burrs at the entrance and exit surface were analyzed for efficient removal. The surface roughness after deburring was also reviewed for better performance. In addition, the influence of the feed rate on deburring quality was analyzed for improved productivity. Through this process, a new deburring tool can be applied effectively to remove burrs formed at intersecting holes.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.113-116
• /
• 1997

The hydrogel process is a different form of ultrafiltration and has been used to separate biological molecules. In this study, the gel pore size was predicted by pulse NMR technique and neural network using a database obtained from gel filtration chromatography and diffusion experiment. Recombinant alkaline phosphatase expressed in insect cells was concentratred 1.5 times by hydrogel ultrafiltration by swelling at 2$0^{\circ}C$ and collapsing at 35$^{\circ}C$ at 53-65% separation efficiency and 78-83% enzyme recovery. Wild and recombinant Autographa californica unclear polyhedrosis viruses (AcNPV) were also concentrated 1.4 and 1.6 times of the feed solution at 48.5 and 60.0% separation efficiency, respectively Hydrogel ultrafiltration appears to be an attractive alternative for the concentration of AcNPV and recombinant proteins from insect cells.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2011

This study assesses the dispersion and emission rates of odor form industrial area source. CALPUFF and AERMOD Gaussian models were used for predicting downwind odor concentration and calculating odor emission rates. The studied region was Seobu industrial complex in Korea. Odor samples were collected five days over a year period in 2006. In-site meteorological data (wind direction and wind speed) were used to predict concentration. The BOOT statistical examination software was used to analyze the data. Comparison between the predicted and field sampled downwind concentration using BOOT analysis indicates that the CALPUFF model prediction is a little better than AERMOD prediction for average downwind odor concentrations. Predicted concentrations of AERMOD model have a little larger scatter than that of CALPUFF model. The results also show odor emission rates of Seobu industrial complex area were an order of 10 smaller than that of beef cattle feed lots.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.539-540
• /
• 2006

It is so difficult to small amounts of two or more fluid species into single in microchannel because flows are usually laminar. In this regard multilamination micro mixer including recirculation zone is presented. Alternating feed micro channels make multilamination and converging-diverging channels form recirculation zone. Multilamination with geometric focusing decreases diffusion path ana recirculation zones make vortex. In this paper flow patterns and mixing properties of multilamination micro mixer including recirculation zone were investigated by Computational Fluid Dynamics (CFD). The CFD results provided qualitative information on mixing.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.06a
• /
• pp.93-104
• /
• 1997

The objective of this study is to develop a method to reduce arsenic concentrations in contaminated water. This work is also aimed at increasing the specificity of membrane separation processes. Arsenic in contaminated waters is often present in the form of negatively charged oxyanions. These are relatively small molecules which cannot be separated directly by ultrafiltration. Oxyanions can be captured by polyelectrolytes and separated by ultrafiltration. Results will be presented on the use of two polyelectrolytes; polyethylenimine (PEI) and poly-diallyl dimethyl ammonium chloride (DADMAC) at various feed concentrations. A semi-continuous process utilizing PEI in a circulation loop was tested. The restfits indicate that better than 99.6 % recovery (permeate concentration < 0.001 $\mu$g/L) can be achieved based on an initial arsenic concentration of 300 $\mu$g/L. The results indicate that this treatment method is suitable as a main treatment process for drinking water or a polishing step after arsenic precipitation.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.219-220
• /
• 2006

In this paper, we designed and implemented the Dual Band Dipole Antenna with Tapered Microstrip Balun for WLAN Access Point. Two dipole antennas with different resonant frequency and the antenna structure combined additional line were implemented for dual band performance. In order to feed the balun current, the tapered microstrip balun was used. Produced the Dual Band Antenna shows a special quality. The quality is that all VSWR is less than 1.5 in the 2.4GHz and 5GHz frequency bands in 802.11 standards, and it profits not less than 1.7dBi having typical Dipole Antenna pattern the very "a form of 8"pattern and Omni-directional pattern.