• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.167-174
• /
• 1998

The ultrasonic test is recognized for its significance as a non-destructive testing method to detect volume defects such as porosity and incomplete penetration which reduce strength in the weld zone. This paper illustrates the defect detection in the weld zone of ferritic carbon steel using ultrasonic wave and the evaluation of pattern recognition by chaotic feature extraction using time series signal of detected defects as data. Shown in the time series data were that the time delay was 4 and the embedding dimension was 6 which indicate the geometric dimension of the subject system and the extent of information correlation. Based on fractal dimension and lyapunov exponent in quantitative chaotic feature extraction, feature value of 2.15, 0.47 is presented for porosity and 2.24, 0.51 for incomplete penetration The precision rate of the pattern recognition is enhanced with these values on the total waveform of defect signal in the weld zone. Therefore, we think that the ultrasonic pattern recognition method of weld zone defects of ferritic carbon steel by ultrasonic-chaotic feature extraction proposed in this paper can boost precision rate further than the existing method applying only partial waveform.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.404-406
• /
• 1996

The objective of this paper is to present a new feature-vector extraction method for the automatic detection and classification of power quality(PQ) disturbances, where FFT, DWT(Discrete Wavelet Transform), and data compression are utilized to extract an appropriate feature vector. In particular, the proposed classifier consists of three parts: i.e., (i) automatic detection of PQ disturbances, where the wavelet transform and signal power estimation method are utilized to detect each disturbance, (ii) feature vector extraction from the detected disturbance, and (iii) automatic classification, where Multi-Layer Perceptron(MLP) is used to classify each disturbance from the corresponding extracted feature vector. To demonstrate the performance and applicability of the proposed classification algorithm, some test results obtained by analyzing 7-class power quality disturbances generated by the EMTP are also provided.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.121-125
• /
• 1990

Optical Hough transform technique is introduced to obtain the straight line features in parallel from the input scene images. Experimental results are also provided to demonstrate the advantage of such optical parallel processor over the digital one. Peaks in optical Hough space are free from quantization noise and thus easy to detect.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.137-140
• /
• 1996

Finding line segments in an intensity image has been one of the most fundamental issues in computer vision. In complex scenes, it is hard to detect the locations of point features. Line features are more robust in providing greater positional accuracy. In this paper we present a robust "line features extraction" algorithm which extracts line feature in a single pass without using any assumptions and constraints. Our algorithm consists of five steps: (1) edge scanning, (2) edge normalization, (3) line-blob extraction, (4) line-feature computation, and (5) line linking. By using edge scanning, the computational complexity due to too many edge pixels is drastically reduced. Edge normalization improves the local quantization error induced from the gradient space partitioning and minimizes perturbations on edge orientation. We also analyze the effects of edge processing, and the least squares-based method and the principal axis-based method on the computation of line orientation. We show its efficiency with some real images.al images.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.4
• /
• pp.840-855
• /
• 2011

In the context of additive noise steganography model, we propose a method to detect least significant bit (LSB) matching steganography in grayscale images. Images are decomposed into detail sub-bands with local linear transform (LLT) masks which are sensitive to embedding. Novel normalized characteristic function features weighted by a bank of band-pass filters are extracted from the detail sub-bands. A suboptimal feature set is searched by using a threshold selection algorithm. Extensive experiments are performed on four diverse uncompressed image databases. In comparison with other well-known feature sets, the proposed feature set performs the best under most circumstances.

• Journal of Power Electronics
• /
• v.8 no.1
• /
• pp.101-107
• /
• 2008

In this paper, the features extracted from vibration time signals are used to detect the bearing fault condition. The decision tree is applied to diagnose the bearing status, which has the benefits of being an expert system that is based on knowledge history and is simple to understand. This paper also suggests a genetic algorithm (GA) as a method to reduce the number of features. In order to show the potentials of this method in both aspects of accuracy and simplicity, the reduced-feature decision tree is compared with the non reduced-feature decision tree and the PCA-based decision tree.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2373-2378
• /
• 2005

An emotion detection algorithm using frontal facial image is presented in this paper. The algorithm is composed of three main stages: image processing stage and facial feature extraction stage, and emotion detection stage. In image processing stage, the face region and facial component is extracted by using fuzzy color filter, virtual face model, and histogram analysis method. The features for emotion detection are extracted from facial component in facial feature extraction stage. In emotion detection stage, the fuzzy classifier is adopted to recognize emotion from extracted features. It is shown by experiment results that the proposed algorithm can detect emotion well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.517-523
• /
• 2010

In this paper, we proposed an algorithm to detect aggressive driving status by analysing six kinds of driving patterns, which was achieved by comparing for the feature vectors using mahalanobis distance. The first step is to construct feature matrix of $6{\times}2$ size using frequency response of the time-series accelerometer data. Singular value decomposition makes it possible to find the dominant eigenvalue and its corresponding eigenvector. We use the eigenvector as the feature vector of the driving pattern. We conducted real experiments using three drivers to see the effects of recognition. Although there exists differences from individual drivers, we showed that driving patterns can be recognized with about 80% accuracy. Further research topics will include the development of aggressive driving warning system by improving the proposed technique and combining with post-processing of accelerometer signals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.5079-5099
• /
• 2018

Regarding to the huge number of connections and the large flow of data on the Internet, Intrusion Detection System (IDS) has a difficulty to detect attacks. Moreover, irrelevant and redundant features influence on the quality of IDS precisely on the detection rate and processing cost. Feature Selection (FS) is the important technique, which gives the issue for enhancing the performance of detection. There are different works have been proposed, but a map for understanding and constructing a state of the FS in IDS is still need more investigation. In this paper, we introduce a survey of feature selection algorithms for intrusion detection system. We describe the well-known approaches that have been proposed in FS for IDS. Furthermore, we provide a classification with a comparative study between different contribution according to their techniques and results. We identify a new taxonomy for future trends and existing challenges.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.791-794
• /
• 2012

We propose an efficient framework to realistically render 3D faces with a reduced set of points. First, a robust active appearance model is presented to detect facial features in the projected faces under different illumination conditions. Then, an adaptive simplification of 3D faces is proposed to reduce the number of points, yet preserve the detected facial features. Finally, the point model is rendered directly, without such additional processing as parameterization of skin texture. This fully automatic framework is very effective in rendering massive facial data on mobile devices.