• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.27-35
• /
• 1994

It is known that a unified phase I-phase II semi-infinite optimization algorithm with a steerign parameter performs better than the original unified phase I-phase II algorithm. In this paper, the effect of the steering parameter is analized and a new algorithm is presented based on the facts that when the point x is far away from the feasible region, reaching to the feasible region is more important than minimizing the cost functio and that when the point x is near the region, it is more efficient to try to reach the feasible region and to minimize the cost function concurrently. It is also important to consider the relationship between the feasible direction and the gradient of the cost function. Even though changing the steering parameter does not change the rate of convergence of the algorithm, it is shown from examples that given new algorithm is more efficient than the previous ones.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.655-660
• /
• 2005

The feasible range of design variables for centrifugal pumps have been investigated. The present study has suggested a searching procedure to find the feasible ranges using only non-dimensional parameters. The results in the typical specific speed region and the low specific speed region have been presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.483-487
• /
• 1994

In this paper, we analize the effect of a steering water used in a unified phase I-phase II semi-infinite constrained optimization algorithm and present a new algorithm based on the facts that when the point x is far away from the feasible region where all the constraints are satisfied, reaching to the feasible region is more important than minimizing the cost function and that when the point x is near the region, it is more efficient to try to reach the feasible region and to minimize the cost function concurrently. Also, the angle between the search direction vector and the gradient of the cost function is considered when the steering parameter value is computed. Even though changing the steering parameter does not change the rate of convergence of the algorithm, we show through some examples that the proposed algorithm performs better than the other algorithms.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.12
• /
• pp.991-997
• /
• 2002

The concept of feasible & invariant region plays an important role to derive closed loop stability and achie adequate performance of constrained receding horizon predictive control. In this paper, we define a complex polyhedral feasible & invariant set for all stabilizable input-constrained linear systems by using a complex transform and propose a one-norm based receding horizon control scheme using these invariant sets. In order to get a larger stabilizable set, a convex hull of invariant sets which are defined for different state feedback gains is used as a target invariant set of the constrained receding horizon control. The proposed constrained receding horizon control scheme is formulated so that it can be solved via linear programming.

• Journal of radiological science and technology
• /
• v.41 no.3
• /
• pp.231-240
• /
• 2018

Automated breast ultrasound (ABUS) equipment is a new innovative technique for 3D automatic breast scanning, but limited for the examination in the concave axillary region. The purpose of this study was to determine feasible candidate materials for the ultrasonic wave propagation media in ABUS, enabling the evaluation of the axillary region. Ultrasonography was performed using an ABUS system ($Invenia^{TM}ABUS$, GE, USA) on the ultrasound-specific phantom (UC-551M-0.5, ATS Laboratories, USA) covered by different candidate materials. The validity of feasible candidate materials was evaluated by image quality. Three independent radiological technologists, with more than 10 years of experience, visually assessed on the images. The inter-observer agreements according to the candidate materials were tested using Cronbach's alpha. Unenveloped solidified carrageenan can be a feasible material for the use of ABUS with excellent test reliability. Therefore, the coverage of the axillary region with carrageenan may be effective for ABUS which was originally developed for the convex anatomic structure as female breast.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.691-697
• /
• 2006

Metamodel, model of model, has been widely used to improve an efficiency of optimization process in engineering fields. However, global metamodels of constraints in a constrained optimization problem are required good accuracy around neighborhood of optimum point. To satisfy this requirement, more sampling points must be located around the boundary and inside of feasible region. Therefore, a new sampling strategy that is capable of identifying feasible domain should be applied to select sampling points for metamodels of constraints. In this research, we suggeste sequential feasible domain sampling that can locate sampling points likely within feasible domain by using penalty function method. To validate the excellence of feasible domain sampling, we compare the optimum results from the proposed method with those form conventional global space-filling sampling for a variety of optimization problems. The advantages of the feasible domain sampling are discussed further.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.5
• /
• pp.382-390
• /
• 2008

Five-axis machining has been applied to manufacture of turbine blades, impellers, marine propellers. Nowadays it extends to mold & die machining, where more productivity as well as added value is expected. The five-axis machining can be divided into positional and continuous, according to the variableness of tool orientation during material removal process. The positional five-axis machining is commonly applied to the regional machining on a whole part surface in mold manufacturing industry, where the tool orientation for each region (area) should be determined to be feasible, that is, avoiding any interference such as machine tool collision, etc. Therefore it is required for a CAM programmer to decide a feasible tool orientation in generating tool-paths on a designated area, because it is a very tedious job to obtain such information by utilizing a commercial CAM system. The developed system generates feasibility data on tool orientation and machining region, which facilitates the CAM programmer's decision on a feasible tool orientation.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.28-35
• /
• 1997

A new approach concurrent transistor sizing and buffer insertion for low power optimization is proposed in this paper. The method considers the tradeoff between upsizing transistors and inserting buffers and chooses the solution with the lowest possible power and area cost. It operates by analyzing the feasible region of the cost-delay curves of the unbuffered and buffered circuits. As such the feasible region of circuits optimized by our method is extended to encompass the envelop of cost-delay curves which represent the union of the feasible regions of all buffered ad unbuffered versions of the circuit. The method is efficient and tunable in that optimality can be traded for compute time and as a result it can in theory near optimal results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.1
• /
• pp.33-47
• /
• 1978

This paper attempts to develop a method which combines a subway system with a feeder bus system in order to increase the efficiency of the performance of the subway system. The 'feasible region' where a subway system is more desirable than a conventional bus in its travel time far the CBD-bound trip is determined and the service-specification models of the two systems in this region have been formulated and analyzed in an aggregate manner. The model developed in this study is applied to the Subway Line No. 1 in Seoul. The result obtained in the analysis indicates that the combined system can be guaranteed as a desirable mode in the point of travel time and cost within the feasible region. The concept of the model will lead to a proper assessment of the system's potentials for the choice of an optimal combination of the existing transport technologies.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.1
• /
• pp.32-37
• /
• 2002

Applications of scaled telemanipulation into micro or nano world that shows many different features from directly human interfaced tools have been increased continuously. Here, we have to consider many aspects of scaling such as force, position, and impedance. For instance, what will be the possible range of force and position scaling with a specific level of performance and stability\ulcorner This knowledge of feasible staling region can be critical to human operator safety. In this paper, we show the upper bound of the product of force and position scaling and simulation results of 1DOF scaled system by using the Llewellyn's unconditional stability in continuous and discrete domain showing the effect of sampling rate.