• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.27-35
• /
• 1994

It is known that a unified phase I-phase II semi-infinite optimization algorithm with a steerign parameter performs better than the original unified phase I-phase II algorithm. In this paper, the effect of the steering parameter is analized and a new algorithm is presented based on the facts that when the point x is far away from the feasible region, reaching to the feasible region is more important than minimizing the cost functio and that when the point x is near the region, it is more efficient to try to reach the feasible region and to minimize the cost function concurrently. It is also important to consider the relationship between the feasible direction and the gradient of the cost function. Even though changing the steering parameter does not change the rate of convergence of the algorithm, it is shown from examples that given new algorithm is more efficient than the previous ones.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.655-660
• /
• 2005

The feasible range of design variables for centrifugal pumps have been investigated. The present study has suggested a searching procedure to find the feasible ranges using only non-dimensional parameters. The results in the typical specific speed region and the low specific speed region have been presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.483-487
• /
• 1994

In this paper, we analize the effect of a steering water used in a unified phase I-phase II semi-infinite constrained optimization algorithm and present a new algorithm based on the facts that when the point x is far away from the feasible region where all the constraints are satisfied, reaching to the feasible region is more important than minimizing the cost function and that when the point x is near the region, it is more efficient to try to reach the feasible region and to minimize the cost function concurrently. Also, the angle between the search direction vector and the gradient of the cost function is considered when the steering parameter value is computed. Even though changing the steering parameter does not change the rate of convergence of the algorithm, we show through some examples that the proposed algorithm performs better than the other algorithms.

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.991-997
• /
• 2002

The concept of feasible & invariant region plays an important role to derive closed loop stability and achie adequate performance of constrained receding horizon predictive control. In this paper, we define a complex polyhedral feasible & invariant set for all stabilizable input-constrained linear systems by using a complex transform and propose a one-norm based receding horizon control scheme using these invariant sets. In order to get a larger stabilizable set, a convex hull of invariant sets which are defined for different state feedback gains is used as a target invariant set of the constrained receding horizon control. The proposed constrained receding horizon control scheme is formulated so that it can be solved via linear programming.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권3호
• /
• pp.231-240
• /
• 2018

Automated breast ultrasound (ABUS) equipment is a new innovative technique for 3D automatic breast scanning, but limited for the examination in the concave axillary region. The purpose of this study was to determine feasible candidate materials for the ultrasonic wave propagation media in ABUS, enabling the evaluation of the axillary region. Ultrasonography was performed using an ABUS system ($Invenia^{TM}ABUS$, GE, USA) on the ultrasound-specific phantom (UC-551M-0.5, ATS Laboratories, USA) covered by different candidate materials. The validity of feasible candidate materials was evaluated by image quality. Three independent radiological technologists, with more than 10 years of experience, visually assessed on the images. The inter-observer agreements according to the candidate materials were tested using Cronbach's alpha. Unenveloped solidified carrageenan can be a feasible material for the use of ABUS with excellent test reliability. Therefore, the coverage of the axillary region with carrageenan may be effective for ABUS which was originally developed for the convex anatomic structure as female breast.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.691-697
• /
• 2006

Metamodel, model of model, has been widely used to improve an efficiency of optimization process in engineering fields. However, global metamodels of constraints in a constrained optimization problem are required good accuracy around neighborhood of optimum point. To satisfy this requirement, more sampling points must be located around the boundary and inside of feasible region. Therefore, a new sampling strategy that is capable of identifying feasible domain should be applied to select sampling points for metamodels of constraints. In this research, we suggeste sequential feasible domain sampling that can locate sampling points likely within feasible domain by using penalty function method. To validate the excellence of feasible domain sampling, we compare the optimum results from the proposed method with those form conventional global space-filling sampling for a variety of optimization problems. The advantages of the feasible domain sampling are discussed further.

• 한국CDE학회논문집
• /
• 제13권5호
• /
• pp.382-390
• /
• 2008

Five-axis machining has been applied to manufacture of turbine blades, impellers, marine propellers. Nowadays it extends to mold & die machining, where more productivity as well as added value is expected. The five-axis machining can be divided into positional and continuous, according to the variableness of tool orientation during material removal process. The positional five-axis machining is commonly applied to the regional machining on a whole part surface in mold manufacturing industry, where the tool orientation for each region (area) should be determined to be feasible, that is, avoiding any interference such as machine tool collision, etc. Therefore it is required for a CAM programmer to decide a feasible tool orientation in generating tool-paths on a designated area, because it is a very tedious job to obtain such information by utilizing a commercial CAM system. The developed system generates feasibility data on tool orientation and machining region, which facilitates the CAM programmer's decision on a feasible tool orientation.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.28-35
• /
• 1997

A new approach concurrent transistor sizing and buffer insertion for low power optimization is proposed in this paper. The method considers the tradeoff between upsizing transistors and inserting buffers and chooses the solution with the lowest possible power and area cost. It operates by analyzing the feasible region of the cost-delay curves of the unbuffered and buffered circuits. As such the feasible region of circuits optimized by our method is extended to encompass the envelop of cost-delay curves which represent the union of the feasible regions of all buffered ad unbuffered versions of the circuit. The method is efficient and tunable in that optimality can be traded for compute time and as a result it can in theory near optimal results.

• 대한두개안면성형외과학회지
• /
• 제25권3호
• /
• pp.133-140
• /
• 2024

Background: The medial canthal region features a complex three-dimensional and internal anatomical structure. When reconstructing a defect in this area, it is crucial to consider both functional and aesthetic aspects, which presents significant challenges. Generally, local flaps are preferred for reconstruction; however, skin grafts can be used when local flaps are not feasible. Therefore, we conducted a comparative analysis of surgical outcomes skin grafts when local flaps were not feasible, to determine which surgical method is more effective for medial canthal region reconstruction. Methods: Twenty-five patients who underwent medial canthal region reconstruction using skin grafts or local flaps from 2002 to 2021 were enrolled. Patient information was obtained from medical records. Five plastic surgeons evaluated the surgical outcomes based on general appearance, color, contour, and symmetry. Results: Skin grafts were used in eight patients and local flaps were used in 13. Combined reconstructions were employed in four cases. Minor complications arose in four cases but improved with conservative treatment. No major complications were reported. Recurrence of the skin cancer was noted in two cases. All categories showed higher scores for the local flap compared to both skin graft and combined reconstruction; however, the differences were not statistically significant respectively. Conclusion: The choice of appropriate surgical methods for reconstructing defects in the medial canthal region depends on various factors, including the patient's overall health, the size and depth of the defect, and the degree of involvement of surrounding structures. When a local flap is not feasible, a skin graft may provide favorable surgical outcomes. Therefore, a skin graft can serve as a viable alternative for reconstructing the medial canthal region.

• 대한산업공학회지
• /
• 제4권1호
• /
• pp.33-47
• /
• 1978

This paper attempts to develop a method which combines a subway system with a feeder bus system in order to increase the efficiency of the performance of the subway system. The 'feasible region' where a subway system is more desirable than a conventional bus in its travel time far the CBD-bound trip is determined and the service-specification models of the two systems in this region have been formulated and analyzed in an aggregate manner. The model developed in this study is applied to the Subway Line No. 1 in Seoul. The result obtained in the analysis indicates that the combined system can be guaranteed as a desirable mode in the point of travel time and cost within the feasible region. The concept of the model will lead to a proper assessment of the system's potentials for the choice of an optimal combination of the existing transport technologies.