• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.588-594
• /
• 2000

Structural changes of an iron phthalocyanine (FePC) monolayer induced by adsorption and externally applied potential on high area carbon surface have been investigated in situ by iron K-edge X-ray absorption fine structure (XAFS) in 0.5 M $H_2S0_4.$ Fine structures shown in the X-ray absorption near edge structure (XANES) for microcrystalline FePC decreased upon adsorption and further diminished under electrochemical conditions. Fe(II)PC(-2) showed a 1s ${\rightarrow}$ 4p transition as poorly resolved shoulder to the main absorption edge rather than a distinct peak and a weak 1s ${\rightarrow}$ 3d transition. The absorption edge position measured at half maximum was shifted from 7121.8 eV for Fe(lI)PC(-2) to 7124.8 eV for $[Fe(III)PC(-2)]^+$ as well as the 1s ${\rightarrow}$ 3d pre-edge peak being slightly enhanced. However, essentially no absorption edge shift was observed by the 1-electron reduction of Fe(Il)PC(-2), indicating that the species formed is $[Fe(II)PC(-3)]^-$. Structural parameters were obtained by analyzing extended X-ray absorption fine structure (EXAFS) oscillations with theoretical phases and amplitudes calculated from FEFF 6.01 using multiple-scattering theory. When applied to the powder FePC, the average iron-to-phthalocyanine nitrogen distance, d(Fe-$N_p$) and the coordination number were found to be 1.933 $\AA$ and 3.2, respectively, and these values are the same, within experimental error, as those reported ( $1.927\AA$ and 4). Virtually no structural changes were found upon adsorption except for the increased Debye-Wailer factor of $0.005\AA^2$ from $0.003\AA^2.$ Oxidation of Fe(II)PC(-2) to $[Fe(III)PC(-2)]^+$ yielded an increased d(Fe-Np) (1 $.98\AA)$ and Debye-Wailer factor $(0.005\AA^2).$ The formation of $[Fe(II)PC(-3)]^-$, however, produced a shorter d(Fe-$N_p$) of $1.91\AA$ the same as that of crystalline FePC within experimental error, and about the same DebyeWaller $factor(0.006\AA^2)$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.947-950
• /
• 2001

We report the characteristics of organic light emitting diodes (OLEDS) by controlling the carrier mobility according to the crystalline of Iron(II) Phthalocyanine(Fe-Pc) and metal-free Phthalocyanine (H$_2$-Pc). In order to change the recombination zone, we controlled the hole mobility by changing the crystal structures of Fe-Pc and H$_2$-Pc. OLEDs were constructed with ITO/Fe-Pc/triphenyl-diamine (TPD)/tris-(8-hydroxyquinoline)aluminum (Alq$_3$)/Al and ITO/H$_2$-Pc/triphenyl-diamine (TPD)/tris-(8-hydroxyquinoline)aluminum (Alq$_3$)/Al. The electroluminescent properties were changed according to the heat-treatments of Fe-Pc and H$_2$-Pc. We observed that the recombination zone and the carrier mobility were changed as the higher occupied molecular orbital levels of Fe-Pc and H$_2$-Pc decreased.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.61-64
• /
• 2007

Fe-PC와 Fe-TCPC를 합성하여 암모니아 탈착에 따른 촉매의 특성과 황화합물 및 아민류의 흡착실험을 수행하여 다음과 같은 결론을 얻었다. 1) FT-IR로 분석한 결과, Fe-TCPC는 Fe-PC에 비해 카르복실기의 특성 스펙트럼이 관찰되었고, SEM/EDS로 관찰한 결과 카르복실기의 영향으로 Fe의 비율이 낮고 산소의 량은 높게 나타났으므로 표면에 카르복실기가 존재하고 있음을 알 수 있었다. 2) TPD 실험에서 철 프탈로시아닌 유도체는 두 개의 피크가 저온부와 고온부에서 나타나 약산점과 강산점이 존재하고 있음을 확인 할 수 있었으며, 탈착량은 Fe-TCPC가 Fe-PC보다 고온부에서 강산량점량이 많았고 저온부에서 약산점량은 적게 나타난 것으로 보아 Fe-TCPC가 표면에 카르복실기의 화학적흡착 영향으로 강산점에서 많은 탈착이 일어났음을 의미한다. 3) Fe-TCPC는 Fe-PC보다 비표면적과 세공부피가 많았고, 과산화수소의 분해효율이 높아 촉매적 성질이 우수하였으며, 또한 입자의 크기도 작았음을 확인하였다. 이는 모든 조건에서 Fe-TCPC가 Fe-PC보다 흡착능력이 우수한 것으로 예측된다. 4)카르복실기가 치환된 철 프탈로시아닌 유도체의 제거효율은 아민화합물이 우수하지만 황화합물에서 다소 낮게 나타났다. 이 결과로 보아 아민류에 효과가 있는 카르복실 철 프탈로시아닌을 착색제로 사용하면 탈취 기능을 가진 안료가 될 것으로 생각된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1809-1816
• /
• 2000

The catalytic combustion of methanol as a model volatile organic compound(VOC) was been investigated over metal-phthalocyanine(PC) in a fixed bed flow reactor system. The catalytic activity of Co-PC pretreated with air and methanol mixture at $450^{\circ}C$ and 60 cc/min for 1 hr was very excellent. The order of catalytic activity on methanol combustion was summarized as follows: metal free-PC < Zn-PC < Fe-PC < Cu($\alpha$)-PC < Co-PC. By TG/DTA analysis, the tendency of thermal decomposition was increased as follows: metal free-PC < Zn-PC < Cu($\alpha$)-PC < Co-PC < Fe-PC. Under this pretreatment condition, the basic structures of Co-PC, Cu($\alpha$)-PC and Fe-PC were destroyed, and the new metal oxide such as $Co_3O_4$ from Co-PC was confirmed by EA and XRD analysis. But Zn-PC and metal free-PC were retained its basic structure under this pretreatment condition. On the combustion of methanol over Co-PC, HCHO and $HCOOCH_3$ were observed as an intermediate products in the high concentration of reactant or the short contact time(W/F).

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.66-71
• /
• 2008

A new route to phthalocyanine complexes were developed to synthesize these products by fusion in the absence of solvent. This new method of synthesis without using solvent has advantages over the conventional synthetic methods since there are no risk of explosion and formation of harmful vapor from organic solvent. Reaction of PcFe with axial ligands such as $PcFe(4-VP)_2$[Pc: Phthalocyanine, 4-VP: 4-Vinylpyridine] and $PcFe(VIM)_2$[VIM: 1-Vinylimidazole] afforded powderlike, pure dark greenish blue colored products. The resulted products are soluble in $CH_2Cl_2$ and found to be complexes of the type $PcFeL_2$. Spectral properties were studied with ATR-FTIR and UV/Vis. Thermal and electrical characterization was also performed. Phthalocyanine complexes exhibit useful properties such as UV/Vis blocking, antistatic characteristics and excellent thermal stability and we anticipate various applicability in numerous products.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.575-584
• /
• 2007

The adsorption capability of iron phthalocyanine derivatives were investigated by means of X-ray diffractometor (XRD), IR (infrared) spectroscopy, scanning electron microscopy (SEM) and temperature programmed desorption (TPD). According to TPD results, iron phthalocyanine derivatives showed two desorption peaks at low temperature ($100{\sim}150^{\circ}C$) and high temperature ($350{\sim}400^{\circ}C$) indicating that there were two kinds of acidities. Tetracarboxylic iron phthalocyanine (Fe-TCPC) have a stronger desorption peak (chemical adsorption) at the high temperature and a weaker desorption peak (physical adsorption) at the low temperature than iron phthalocyanine (Fe-PC). The specific surface areas of Fe-TCPC and Fe-PC were $26.46\;m^2/g\;and\;11.77\;m^2/g$, respectively. The pore volumes of Fe-TCPC and Fe-PC were $0.14\;cm^3/g\;and\;0.06\;cm^3/g$, respectively. The adsorption capability of triethyl amine calculated by breakthrough curve at 220 ppm of equilibrium concentration was 29.2 mmoL/g for Fe-TCPC and 0.8 mmoL/g for Fe-PC. The removal efficiency of dimethyl sulfide of Fe-TCPC and Fe-PC in batch experiment of 225 ppm of initial concentration were 44.9% and 28.9%, respectively. The removal efficiency of trimethyl amine of Fe-TCPC and Fe-PC in batch experiment of 118 ppm of initial concentration were approximately 100.0% and 33.9%, respectively.

• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.162-166
• /
• 2012

V-I characteristics of Fe(100)/MgO(100)/Cu-phthalocyanine (CuPc)/Co hybrid magnetic tunnel junctions were investigated at different temperatures. Fe(100) and Co ferromagnetic layers were separated by an organic-inorganic hybrid barrier consisting of different thickness of CuPc thin film grown on a 2 nm thick epitaxial MgO(100) layer. As the CuPc thickness increases from 0 to 10 nm, a bistable switching behavior due to strong charging effects was observed, while a very large magenetoresistance was shown at 77 K for the junctions without the CuPc barrier. This switching behavior decreases with the increase in temperature, and finally disappears beyond 240 K. In this work, high-potential future applications of the MgO(100)/CuPc bilayer were discussed for hybrid spintronic devices as well as polymer random access memories (PoRAMs).

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.662-668
• /
• 1989

The decomposition reaction of hydrogen peroxide was carried out by using metal-4,4',4",4"'-tetraaminophthalocyanine [Mt-$PcNH_2$, Mt = Fe(III), Co(II)] supported on poly (styrene-co-methacrylic acid), in heterogeneous aqueous system. These catalysts showed a catalse-like activity and Fe(III)-$PcNH_2$ supported on the copolymer was particularly effective for the decomposition of hydrogen peroxide. It was found that the rate of decomposition increased smoothly in the higher pH region and catalytic reaction was interfered by adding $CN^-,\;CNS^-,\;{C_2O_4}^{-2},\;I^-$ ions. The kinetics of the catalytic reaction was also investigated and the reaction proceeds according to the Michaelis-Menten type mechanism.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1738-1742
• /
• 2009

Nanocrystalline Zn$Fe_2O_4$ oxide-semiconductor with spinel structure was synthesized by the polymerized complex (PC) method and investigated for its photocatalytic and photoelectric properties. The observation of a highly pure phase and a lower crystallization temperature in Zn$Fe_2O_4$ made by PC method is in total contrast to that was observed in Zn$Fe_2O_4$ prepared by the conventional solid-state reaction (SSR) method. The band gap of the nanocrystalline Zn$Fe_2O_4$ determined by UV-DRS was 1.90 eV (653 nm). The photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method as investigated by the photo-decomposition of isopropyl alcohol (IPA) under visible light (${\geq}$ 420 nm) was much higher than that of the Zn$Fe_2O_4$ prepared by SSR as well as Ti$O_{2-x}N_x$. High photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method was mainly due to its surface area, crystallinity and the dispersity of platinum metal over Zn$Fe_2O_4$.

• Environmental Engineering Research
• /
• v.18 no.3
• /
• pp.145-150
• /
• 2013

Optimal preparation guidelines of a cathode catalyst layer by non-precious metal catalysts were evaluated based on electrochemical performance in single-chamber microbial fuel cells (MFCs). Experiments for catalyst loading rate revealed that iron(II) phthalocyanine (FePc) can be a promising alternative, comparable to platinum (Pt) and cobalt tetramethoxyphenylporphyrin (CoTMPP), including effects of substrate concentration. Results showed that using an optimal FePc loading of $1mg/cm^2$ was equivalent to a Pt loading of $0.35mg/cm^2$ on the basis of maximum power density. Given higher loading rates or substrate concentrations, FePc proved to be a better alternative for Pt than CoTMPP. Under the optimal loading rate, it was further revealed that 40 wt% of FePc to carbon support allowed for the best power generation. These results suggest that proper control of the non-precious metal catalyst layer and substrate concentration are highly interrelated, and reveal how those combinations promote the economic power generation of single-chamber MFCs.