• 대한환경공학회지
• /
• 제22권10호
• /
• pp.1809-1816
• /
• 2000

본 연구는 상압유통식 반응장치를 이용하여 석유화학공단에서 주로 발생되는 휘발성 유기화합물(volatile organic compound: VOC) 인 methanol의 연소에 대한 다양한 금속-프탈로시아닌의 촉매활성에 관하여 연구하였다. Co-PC의 촉매활성은 air+methanol의 혼합물을 이용하여 전처리한 경우가 air만으로 전처리한 경우보다 더 높았으며, 금속-PC의 촉매활성은 metal free-PC < Zn-PC < Fe-PC < Cu($\alpha$)-PC < Co-PC의 순서 였다. TG/DTA 분석 결과, 금속-PC 의 열분해 용이 성은 metal free-PC < Zn-PC < Cu($\alpha$)-PC < Co-PC < Fe-PC의 순서로 나타었으며, 금속과 프탈로시아닌의 결합특성에 따른 차이로 판단된다. XRD 및 EA 분석결과, 전처리한 후의 Zn-PCS와 metal free-PC는 원래의 결정구조가 거의 유지되었지만, Co-PC, Cu($\alpha$)PC 및 Fe-PC는 원래의 결정구조가 파괴되는 것으로 나타났다. 전처리한 후의 Co-PC는 금속산화물인 $Co_3O_4$의 형태로 존재하였으며, Co-PC의 촉매활성이 가장 우수하였다. Co-PC 상에서 methanol의 촉매연소는 반응물의 농도가 높거나 접촉시간(W/F)이 짧을 경우, 중간생성물로서 HCHO 및 $HCOOCH_3$가 관찰되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.653-655
• /
• 2000

A moving-coil-type linear oscillatory actuator(LOA) consists of the NdFeB permanent magnets with high specific energy as the stator. a coil-wrapped nonmagnetic hollow rectangular structure. LOA system have the push/pull effect caused by the unbalanced magnetic field. In order to eliminate the unbalanced thrust, we propose the control algorithm and construct the LOA driver. As a results, we obtain the balanced oscillating thrust.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.47-57
• /
• 2007

This study focused on the properties natural dyeing and natural material and on the development of functional material for well-being in apparel industry. Comus officinalis Siebold et Zuccarini is used as natural dyeing material which had been reported that have curable effect for unbalanced immunity, geriatric diseases like urinary tract system, diabetes, hypertension, arthritis, tinnitus, hyperhidrosis and women's diseases like hypermenorrhea. And this material also has anti-cancer effect so that can restraint cancer cells. 3 kinds tester of cotton, wool and silk are dyed by boiled with each dye (flower, fruits, bark of tree) as first dyeing and dried in the shade. These testers are done by post-mordanting method. Aluminium Potassium(Alk(SO4)2), Cuprie Sulfate($CuSO4{\cdot}5H2O$), Stannous Chloride($SnCl2{\cdot}2H2O$), Ferrous Sulfate($FeCl2{\cdot}4H2O$), Titanium Sulfate 24% aqueous solution(Ti(SO4)2) are used as mordants. Dyeing results of Comus officinalis Siebold et Zuccarini flower and bark are shown as yellow color series. And dyeing result of fruits is pink color series. Silk shows the best dyeing property. As the point of view for dyeing property, Ti, Sn, Fe would be the properchoice for mordant. Following results are extracted in this study. Yellow color is resulted in dyeing with Cornus officinalis flower as non-mordanting condition. Yellowish red color is come from dyeing with Comus officinalis fruit as non-mordanting condition. Grayish yellow tone is resulted in dyeing with bark as non-mordanting condition. Orange tone color with Ti-mordanting, green tone color with Sn-mordanting and gray tone color with Fe-mordanting is resulted respectively. However light-fastness of Comus officinalis(flower, fruit, bark) is very low as 1 or 2 level in non-mordanting condition, Comus officinalis flower dyeing is turned out 3 or 4 level and fruit dyeing is 4 or 5 level, bark dyeing is 2 or 3 level with Ti-mordanting respectively. Eventually Comus officinalis fruit has the best light-colorfastness property among all of dyes. dry cleaning colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, perspiration-colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, With these results, this study could conclude that dye-ability, colorfastness problem is getting better after mordanting process and practical usage would be possible.

• 암석학회지
• /
• 제21권1호
• /
• pp.13-30
• /
• 2012

제주도의 초염기성-염기성 암편을 포획하고 있는 현무암은 조직적으로 일반 반정과 뚜렷하게 구별되는 금운모와 커슈타이트 결정을 산출하고 있다. 금운모와 커슈타이트는 모암인 현무암에서는 비교적 조립질 (2-10 mm)로 산출되며, 금운모는 초염기성 맨틀포획암에서, 커슈타이트는 염기성 반려암질 포획암에서 세립의 입자(1 mm 이하)로 간극을 채우거나, 미세맥으로 혹은 코로나로 뚜렷한 이차조직으로 산출된다. 금운모는 $TiO_2$(4.1-6.9 wt%)와 F(2.8-4.6wt%)가 풍부하고, mg#[=100Mg/(Mg+$Fe^t$) in mols, where $Fe^t$ is total iron]는 88-80으로 매우 높다. 커슈타이트는 높은 $TiO_2$(5.6-6.11 wt%)와 비교적 낮은 mg#(68-64)를 보인다. 금운모와 커슈타이트는 서로 관련된 것은 아니며, 금운모의 형성은 상부맨틀에서 먼저 일어난 사건이고 커슈타이트의 형성은 하부지각에서 나중에 일어난 사건으로 해석된다. 이들 결정들 사이의 mg#와 조직적 특성은 제주도 암석권에서 맨틀의 심부일수록 금운모 부화작용을 경험하였으며, 천부일수록 각섬석 부화작용이 있었음을 지시하고 있다. 현무암에 금운모와 각섬석이 산출된다는 것은 제주도 상부맨틀/하부지각에 K-, Ti-를 함유한 휘발성 성분이 풍부한 멜트/유체가 이동하고 있다는 것에 대한 직접적인 증거가 되며, 제주도 하부 상부맨틀/하부지각도 다양한 모달 교대작용을 경험하였음을 의미한다.

• 한국환경과학회지
• /
• 제23권10호
• /
• pp.1745-1753
• /
• 2014

Sediment microbial fuel cell (SMFC), equipped with Zn, Al, Cu, Fe or graphite felt (GF) anode and marine sediment, was performed. Graphite felt was used as a common cathode. SMFC was single chambered and did not use any redox mediator. The aim of this work was to find efficient anodic material. Oxidation reduction potential (ORP), cell voltage, current density, power density, pH and chemical oxygen demand (COD) were measured for SMFC's performance.. The order of maximum power density was $913mWm^{-2}$ for Zn, $646mWm^{-2}$ for Fe, $387.8mWm^{-2}$ for Cu, $266mWm^{-2}$ for Al, and $127mWm^{-2}$ for graphite felt (GF). The current density over voltage was found to be strongly correlated with metal electrodes, but the graphite felt electrode, in which relatively weaker electricity was observed because of its bio-oriented mechanism. Metal corrosion reactions and/or a complicated microbial electron transfer mechanism acting around the anodic compartment may facilitate to generate electricity. We presume that more sophisticated selection of anodic material can lead to better performance in SMFC.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.281-290
• /
• 2016

Purpose: The increased aesthetic requirements and demands of patients have resulted in the developments of coloring liquid for zirconia. Methods: In this study, zirconia block was dipped into $Fe(NO_3)_3$solution, which showed a color and then concentration of $Fe(NO_3)_3$and zirconia's color and physical properties depending on the dipping time were observed and compared with exclusive coloring solutions. As the result, the following conclusions were obtained. Results: When compared with the specimens that were colored using exclusive solutions, $L^*$ value rose overall depending on the concentration of $Fe(NO_3)_3$and $a^*$ value was red in the form of (+) in all the specimens. Also, $b^*$ value was in the form of (+) at 0.5 to $1{\ss}fl$, but was in the form of (-) at 1.5 to $2{\ss}fl$. The dipping time did not highly influence $L^*$ value, but $a^*$ value and $b^*$ value were directly opposite to the specimens, which were not colored, except the sample that was dipped for only 2 seconds. When compared with exclusive coloring solutions, $Fe(NO_3)_3$had the most similar color at 0.5 to $1{\ss}fl$ and the longer the coloring time, the higher the rate of color change became. In relation to the density change depending on the addition of $Fe(NO_3)_3$, there was the lowest density at $2{\ss}fl$ and the density was increased in the specimens that were not colored. Conclusion: These results show that $Fe(NO_3)_3$solution can be used to make colored zirconia. It is expected that newly made colored zirconia can be used in clinical practice because the colored zirconia not only possesses the mechanical properties that all ceramic core material should have but also was biocompatible to a living cells.

• 동력기계공학회지
• /
• 제14권1호
• /
• pp.59-64
• /
• 2010

Ferritic stainless steel is currently increasingly used for automotive exhaust material. The material for exhaust manifold is used in the temperature range of 500∼$850^{\circ}C$. Therefore, high temperature characteristic is an important one that affects it's life span. It has been investigated the effect of alloying elements of Cr, Mo, Nb, Ti in the ferritic stainless steel for exhaust manifold on the high temperature tensile strength. There was a few difference in the tensile strength at $600^{\circ}C$ with the exception of low Cr steel, but the steels containing higher Cr, Mo or Nb elements showed significantly higher tensile strength at the temperature of $800^{\circ}C$. The precipitates of the specimens after heat treating at the test temperature were electrolytic extracted, and quantitatively analysed using by SEM-EDS and TEM. The alloying elements of Cr and Mo increased the tensile strength as a solid solution strengthener, and on the other hand Nb element enhanced the strength by forming the fine intermetallic compounds such as NbC or $Fe_2Nb$.

• 자원환경지질
• /
• 제39권5호
• /
• pp.583-595
• /
• 2006

전남 해남 화원일대의 석영맥들은 선캄브리아기의 변성퇴적암류와 쥬라기의 화강암 내에 발달된 단층대를 충진한 천열수성 석영맥이다. 이들 석영맥의 광화작용은 hypogene 시기와 supergene 시기로 구분된다. Hypogene 시기의 광물은 석영, 방해석, 녹염석, 녹니석, 일라이트, 견운모로서 프로필라이트대와 점토대로 구성되며 석영맥에서 산출되는 황화광물은 황철석, 섬아연석, 황동석, 방연석, 반동석, 규버나이트, 함은사면동석, Pb-Ag-S계 광물 및 Pb-Te-S계 광물 등이 관찰된다. Supergene 시기에는 Fe-Mn 산화물, Zn-Fe 산화물 및 Pb 산화물 등이 생성되었다. 유체포유물 자료에 의하면, hypogene 시기의 균일화온도와 염농도는 각각 $291.2{\sim}397.3^{\circ}C,\;0.0{\sim}9.3\;wt.%$ 범위를 보이며, 광화유체는 일부 비등과 기원이 다른 천수와의 혼입에 의해 냉각 및 희석작용을 겪었다. 산소($-0.7{\sim}3.5%_{\circ}$(백색석영 $-0.7{\sim}3.5%_{\circ}$, 투명석영 $2.4%_{\circ}$)), 수소($-7.0{\sim}55%_{\circ}$(백색석영$-7.0{\sim}55%_{\circ}$, 투명석영: $-62%_{\circ}$))동위원소 값 자료로 볼 때, 이 석영맥의 광화유체는 마그마 기원의 유체가 광화작용이 진행됨에 따라 천수의 혼입이 작용한 것으로 해석할 수 있다.

• 한국의류산업학회지
• /
• 제20권3호
• /
• pp.323-330
• /
• 2018

This study aim is to provide new coloration method by laccase-catalyzation on natural phenolic dyeing process. In this study, silk was dyed with black tea, which is one of polyphenolic dye, extracted in distilled water. The dyed samples were catalyzed by laccase as the eco-friendly mordanting process. To optimize the conditions of laccase-catalyzed coloration, conditions were varied by different mordanting methods (one-bath, two-bath), temperature and treatment time. The dye affinity in terms of the value of K/S, $L^*$, $a^*$, $b^*$, and H, V, C was measured by Computer Color Matching System (CCM, CM-2600d, Spectra Magic NX, Korea). The effect of laccase-catalyzed coloration on washing fastness was evaluated and compared with the synthetic mordant (Al, Cu, and Fe). As the result of color analysis of dyed silk, the optimum conditions of laccase-catalyzed coloration were determined to post-mordanting by one-bath at $50^{\circ}C$ for 3 hours. Under the optimum laccase-catalyzed conditions, the dyed silk was shown the color of yellowish-red. After laccase-catalyzed coloration on the dyed silk, the improvement of washing fastness was obtained compared with mordanted silk by synthetic mordant (Al, Cu, and Fe). Therefore, the present study was demonstrated that the effective enzymatic mordanting method by laccase for phenolic natural dyeing with vivid color and good fastness.

• 토지주택연구
• /
• 제13권3호
• /
• pp.125-140
• /
• 2022

도로퇴적물(Road Deposited Sediments, RDS)은 도로, 도로 시설물, 자동차 마모와 배가스, 그리고 도로 외부에서의 유입에 의해 형성되어 도로에 축적되는 입자 물질이다. RDS는 유기물, 휘발성 고형물, 영양염류, 각종 금속류 등 다양한 오염물에 고농도로 오염되어 있고, 강우유출수와 함께 주변 수계로 유출되므로, 도시 지역 비점오염물질의 축적과 이동에 중요한 역할을 한다. 이에, 본 연구는 RDS의 중금속 농도를 문헌에 의해 검토하여, 관련 부하저감 대책수립에 도움이 되고자 하였다. 도시지역 RDS의 중금속 농도는 매우 편차가 컸다. Norway, Spain, Australia, UK, Jordan, Turkey, Iran, Angola, Canada, USA, China, Taiwan, Malaysia, Thailand 그리고 India의 도시 지역 RDS의 Cr, Ni, Cu, Fe, Zn, As, Cd, 그리고 Pb 농도는 각각 3.16-3,410, 1.15-1,382, 20.2-9,069, 2980-124,853, 81-2,550, 2.3-214, 0.19-21.3, 그리고 15.21-1,125mg/kg 이었다. 특히, Cu, Fe, Mn, Zn, Cd, 그리고 Pb의 농도가 높아, 인위적 요인에 의한 RDS의 중금속 오염이 확인되었다. RDS의 Cr, Ni, Cu, Zn, Cd, 그리고 Pb 농도는 주거지역이나 공원 등에 비해, 교통지역이나 산업지역에서 높았으며, 입도가 감소함에 따라 중금속 농도가 높아졌다. 본 연구결과는 RDS에 의한 수계의 중금속 부하의 산정과, RDS 제어에 의한 비점오염 저감대책의 수립에 도움이 될 것으로 생각된다.