• Title/Summary/Keyword: Fe-59

Search Result 388, Processing Time 0.03 seconds

Studies on Photocatalytic Thin Films($TiO_2$, TiO-N) Manufactured by DC Magnetron Sputtering Method and it's Characteristics for Removal of Pollutants (DC 마그네트론 스퍼터링법을 이용한 광촉매박막($TiO_2$, TiO-N)제조 및 오염물질 제거에 관한 연구)

  • Jeong, Weon-Sang;Park, Sang-Weon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.1
    • /
    • pp.59-66
    • /
    • 2005
  • [ $TiO_2$ ] was deposited by DC magnetron sputtering on glass surface under various sputtering parameters such as discharge power($0.6{\sim}5.2\;kW$, substrate temperature($R.T{\sim}350^{\circ}C$), Ar and $O_2$ flow ratio with $0{\sim}50\;sccm$($Ar+O_2$ 90 sccm) and about 1 mtorr of pressure. TiO-N thin film was prepared under same sputtering conditions for $TiO_2$ thin film except flow ratio($Ar+O_2+N_2$ 90 sccm). The sheet resistance of thin films deposited under these parameters was measured to analyze electronic characteristic and thin film's thickness(${\alpha}$-step), surface roughness(AFM) and formation construction(FE-SEM, XRD) were also measured to draw optimal sputtering parameters. In order to evaluate photo-activity of thin film($TiO_2$, TiO-N) made in optimal parameters for removal of pollutants, toluene among VOCs and Suncion Yellow among reactive dyes were chosen to probe organic compounds for photo-degradation. It was shown that the photo-catalytic thin films had a significant photo-activation for the chosen contaminants and especially TiO-N thin film showed maximum efficiency of 33% for toluene(5 ppm) removal in visible-light range.

Antioxidant Effect of Extracts Obtained from Four Aster Species Native to Korea (자생 쑥부쟁이속 식물 4종 추출물의 항산화 효과)

  • Woo, Jeong-Hyang;Jeong, Heon-Sang;Yu, Jung-Sik;Chang, Young-Deug;Lee, Cheol-Hee
    • Korean Journal of Plant Resources
    • /
    • v.21 no.1
    • /
    • pp.52-59
    • /
    • 2008
  • This study was conducted to evaluate the antioxidative potentials of 4 Aster species. Flowers and aerial parts were extracted with 80% ethanol, and antioxidative activities and bioactive substance contents were investigated. Flowers showed higher extraction yield than aerial parts of all 4 species used. Among the samples tested, Flowers of A. scaber were found to be the most effective in both DPPH and ABTS radical scavenging assay. However, $Fe^{2+}$ chelate effect of all samples were lower than EDTA. Four samples(A. scaber flowers, A. sphathulifolius aerial parts, A. koraiensis flowers, A. scaber aerial parts) out of eight showed stronger inhibitory activities against linoleic acid oxidation than BHT at 8 days. Total polyphenol and flavonoid contents of A. scaber flowers(90.46 and $75.36mg{\cdot}g^{-1}$) were the highest, and followed by A. sphathulifolius flowers.

The Characterization of Spherical Perticles in Steam Generator Sludge (증기발생기 슬러지 중 구형입자의 특성 조사)

  • Pyo, Hyung-Yeal;Park, Yang-Soon;Park, Sun-Dal;Park, Kyoung-Kyun;Song, Byung-Chul;Park, Yong-Joon;Jee, Kwang-Yong
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.4 no.1
    • /
    • pp.59-64
    • /
    • 2006
  • Ion exchange resin particles should not be found in steam generator(S/G) sludge. The suspicious spherical resin particles observed in S/G sludge sample were characterized for particle size distribution under optical microscope using the micro-technique, for element analysis by the electron probe micro analysis (EPMA), and for molecular identification by the IR spectroscopy. The particle sizes are distributed from 1 to $200{\mu}m$ for the sludge, while 40 to $500{\mu}m$ for the spherical resin particles. The results of the elemental analysis showed different major impurities: Si, Al, Mn, Cr, Ni, Zn and Ti for the sludge particles, while Si, Cu, Zn for the spherical resin particles. However, both particles contain Fe as a matrix of magnetite $(Fe_3O_4)$. IR spectrum of the spherical particles was not quite similar to the IR spectrum of ion exchange resins used in S/G system. These results indicate that the spherical particles are not related to ion exchange resin particles and may be formed by the process of the sludge formation.

  • PDF

Biomechanical Efficacy of a Combined Flexible Cage with Pedicle Screws with Spring rods: A Finite Element Analysis (Spring rod를 사용한 척추경 나사못과 동반 시술된 Flexible cage의 생체역학적 효과)

  • Kim, Y.H.;Park, E.Y.;Kim, W.H.;Hwang, S.P.;Park, K.W.;Lee, Sung-Jae
    • Journal of Biomedical Engineering Research
    • /
    • v.38 no.1
    • /
    • pp.9-15
    • /
    • 2017
  • Recently, flexible cages have been introduced in an attempt to absorb and reduce the abnormal load transfer along the anterior parts of the spine. They are designed to be used with the pedicle screw systems to allow some mobility at the index level while containing ROM at the adjacent level. In this study, a finite element (FE) study was performed to assess biomechanical efficacies of the flexible cage when combined with pedicle screws with flexible rods. The post-operated models were constructed by modifying the L4-5 of a previously-validated 3-D FE model of the intact lumbar spine (L2-S1): (1) Type 1, flexible cage only; (2) Type 2, pedicle screws with flexible rods; (3) Type 3, interbody fusion cage plus pedicle screws with rigid rods; (4) Type 4, interbody fusion cage plus Type 2; (5) Type 5, Type 1 plus Type 2. Flexion/extension of 10 Nm with a compressive follower load of 400N was applied. As compared to the Type 3 (62~65%) and Type 4 (59~62%), Type 5 (53~55%) was able to limit the motion at the operated level effectively, despite moderate reduction at the adjacent level. It was also able to shift the load back to the anterior portions of the spine thus relieving excessively high posterior load transfer and to reduce stress on the endplate by absorbing the load with its flexible shape design features. The likelihood of component failure of flexble cage remained less than 30% regardless of loading conditions when combined with pedicle screws with flexible rods. Our study demonstrated that flexible cages when combined with posterior dynamic system may help reduce subsidence of cage and degeneration process at the adjacent levels while effectively providing stability at the operated level.

Polyphenol Compounds and Biochemical Characteristics of Polyphenol Oxidase in Chinese Chestnut (밤의 Polyphenol물질과 Polyphenol Oxidase의 생화학적 특성)

  • Yun, Ki Yun;Moon, Kwang Deog;Sohn, Tae Hwa
    • Current Research on Agriculture and Life Sciences
    • /
    • v.9
    • /
    • pp.51-59
    • /
    • 1991
  • This study was conducted to understand browning characteristics of Chinese Chestnut during processing and storage. For this, the isolation and identification of polyphenolic compounds and the biochemical characteristics of polyphenol oxidase(PPO) were investigated. The content of total phenol was $6.5{\mu}g/g$ and it was consisted of ferulic acid, caffeic acid, synapic acid, p-coumaric acid, gallic acid and salicylic acid in order. PPO was purified 11.7 fold through ammonium sulfate fractionation, DEAE-cellulose column chromatography and Sephadex G-200 column chromatography. Purified enzyme showed single protein and activity band by polyacrylamide gel electrophoresis. The optimum pH and temperature of PPO were 5.9 and $45^{\circ}C$, respectively. The activity of PPO was lost 93% by exposing at $80^{\circ}C$ for 15minutes. $Mg^{{+}{+}}$, $Ca^{{+}{+}}$, $Zn^{{+}{+}}$ increased the activity of PPO, but $Fe^{{+}{+}}$, $K^+$, $Hg^{{+}{+}}$ inhibited PPO at 10mM concentration. L-ascorbic acid, thiourea, sodium chloride and L-cysteine were effective inhibitors of PPO. The activity of PPO was higher for o-diphenols than other polyphenols. The Km value of PPO for catechol was 5mM.

  • PDF

Revealing the Spatial Distribution of Inorganic Elements in Rice Grains

  • Jeon, Ji Suk;Choi, Sung Hwa;Lee, Ji Yeon;Kim, Ji A;Yang, Young Mi;Song, Eun Ji;Kim, Jae Sung;Yang, Jung Seok;Kim, Kyong Su;Yoo, Jong Hyun;Kim, Hai Dong;Park, Kyung Su
    • Bulletin of the Korean Chemical Society
    • /
    • v.35 no.11
    • /
    • pp.3289-3293
    • /
    • 2014
  • Femtosecond laser ablation (fs LA) was used in this study to identify pollution by heavy metals and the distribution of elemental nutrients at different rice milling ratios. Polished rice (degrees of milling of 3, 5, 7, 9, and 11) was collected from major Korean supermarkets and one sample thereof was selected. An internal quality control experiment was conducted using a rice flour certified reference material from the Korea Research Institute of Standards and Science (KRISS CRM) for the evaluation of the efficacy. To assess the effectiveness of the analysis method, the reliability was validated using a food analysis performance assessment scheme (FAPAS), with chili powder serving as an external quality control. The results of the analysis of the inorganic elements Ti, Ca, Al, Fe and Mn in white and brown rice with degrees of milling of 3, 5, 7, 9 and 11 using ICP-MS, ICP-OES and AAS revealed contents of 0.40, 49.2, 2.43, 5.36 and 10.3 mg/kg in white rice and 0.59, 78.0, 7.52, 11.0 and 18.5 mg/kg in brown rice, respectively. Among the elements, there were remarkable differences in the measured contents. By comparing the contents of the elements at different degrees of milling, Ti, Co, As, Ca, Al, Cu, Fe, and Mn were determined to be distributed on the surface of the rice grains, whereas the contents of Cd and Pb increased toward the center of the rice grains, and Si was evenly distributed. After the quantitative analysis of rice samples polished to different degrees of milling, Ca and Al, which were contained in large amounts, and Si were analyzed with specificity by fs LA. The results show that Ca and Al were distributed in the rice husk (protective covering of rice) and Si was distributed in all parts of the rice.

Preparation of diffusion dialysis membrane for acid recovery via a phase-inversion method

  • Khan, Muhammad Imran;Wu, Liang;Hossain, Md. Masem;Pan, Jiefeng;Ran, Jin;Mondal, Abhishek N.;Xu, Tongwen
    • Membrane and Water Treatment
    • /
    • v.6 no.5
    • /
    • pp.365-378
    • /
    • 2015
  • Herein, the preparation of anion exchange membrane (AEM) from brominated poly(2,6-dimethyl 1,6-phenylene oxide) BPPO and dimethylaniline (DMA) by phase-inversion process is reported. Anion exchange membranes (AEMs) are prepared by varying the DMA contents. Prepared AEMs show high thermal stability, water uptake (WR) around 202% to 226%, dimensional change ratios of 1.5% to 2.6% and ion exchange capacities (IECs) of 0.34 mmol/g to 0.82 mmol/g with contact angle of $59.18^{\circ}$ to $65.15^{\circ}$. These membranes are porous in nature as confirmed by SEM observation. The porous property of membranes are important as it could reduce the resistance of transportation of ions across the membranes. They have been used in diffusion dialysis (DD) process for recovery of hydrochloric acid (HCl) from the mixture of HCl and ferrous chloride ($FeCl_2$). Presence of $-N+(CH_3)_2C_6H_5Br^-$ as a functional group in membrane matrix facilitates its applications in DD process. The dialysis coefficients of hydrochloric acid ($U_H$) of the membranes are in range of 0.0016 m/h to 0.14 m/h and the separation factors (S) are in range of 2.09 to 7.32 in the $HCl/FeCl_2$ system at room temperature. The porous membrane structure and presence of amine functional group are responsible for the mechanism of diffusion dialysis (DD).

Differences in Soil Chemical Properties Under Multi-layer System, USGA System and Mono-layer System for a Sports Turf (스포츠용 잔디의 다단구조, USGA구조 및 단층구조 지반에서 토양 화학성 차이)

  • Kim, Kyoung-Nam
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.9 no.5
    • /
    • pp.50-59
    • /
    • 2006
  • This study was initiated to investigate soil chemical properties under different soil systems. Data such as soil acidity(pH), electrical conductivity(EC), organic matter content(OMC), and cation exchange capacity(CEC) were analyzed with samples from multi-layer, USGA, and mono-layer systems. N, P, K and micronutrients were also measured. Multi-layer system was built up to 60-cm depth with rootzone layer, intermediate layer and two drainage layers. USGA system 45 centimeters deep was constructed with rootzone layer, intermediate layer and drainage layer. Mono-layer system, however, was made only with a 30-cm rootzone layer. Differences were observed in soil pH, EC, OMC, CEC and micronutrients. Soil pH was acceptable for turfgrass growth a year after establishment, being 5.5 to 6.5 in the study. Differences were greatly observed for EC among soil systems. Values of EC for multi-layer, USGA, and mono-layer systems were 39.79, 31.26 and 103.54 uS/em, respectively. The increase rate was approximately 4 to 8 times greater with mono-layer system than those with other two systems. Therefore, it was necessary to avoid micronutrient deficiency such as Fe, Mn etc. through an effective management program in mono-layer system because of its faster potential feasibility of salt accumulation. The greatest OMC was associated with USGA system, being 0.97% which was 11% over that of the other systems. Slight differences were observed for CEC among them. Mono-layer system produced 1.45 me/100g, 10.3% and 8.9% lower in CEC than those of multi-layer and USGA system, respectively. Micronutrients such as Fe, Zn, and Mn etc. were below the level required for turf growth, regardless of soil systems. It was considered that one year after turf establishment was not enough to build up micronutrients in sand-based soil systems to the normal level for a turf growth. These results demonstrate that intensive management program including grow-in concept fertilization should be integrated into sand-based soil systems, even after a year in establishment. Regular nutrient monitoring by soil analyses is a strong necessity to decide the kinds and amount of fertilizer. Also, strategic management program must be selectively employed according to sports turf soil systems.

Mineral Contents in Bottled Natural Water and Estimation of Their Intake by Korean Adults (일부 무기질의 생수 중 함량 분석과 생수를 통한 섭취량 평가)

  • Kim, Moo-Kyung;Sim, Jin-Ah;Eom, Hee-Jung;Kim, Myung-Hee;Choi, Mi-Kyeong
    • Journal of the Korean Dietetic Association
    • /
    • v.16 no.2
    • /
    • pp.116-121
    • /
    • 2010
  • Minerals play an important role in the body as essential nutrients. However, it is not easy to meet DRIs because food sources of minerals are limited. Recently, consumption of bottled natural water has been increasing in Korea due to water pollution and distrust of tap water. The present study was conducted to investigate mineral contents in bottled natural water and their intakes among Korean adults. We analyzed eight minerals in seven kinds of bottled natural water by ICP-spectrometry and conducted a survey on the intake status of water and bottled natural water with 400 Korean young adults. The mean contents of Ca, Mg, Fe, Zn, Cu, Mn, Se, and Mo in bottled natural water were 22.45${\pm}$22.48 mg/L, 10.59${\pm}$9.97 mg/L, 0.27${\pm}$0.18 ${\mu}g/L$, 2.06${\pm}$1.48 ${\mu}g/L$, 5.47${\pm}$0.70 ${\mu}g/L$, 1.43${\pm}$0.37 ${\mu}g/L$, 1.90${\pm}$0.96 ${\mu}g/L$, and 3.34${\pm}$0.79 ${\mu}g/L$, respectively. The mean age, height, weight, and BMI were 22.76 years, 174.94 cm, 68.64 kg, and 22.41 $kg/m^2$ for males (n=150) and 21.25 years, 162.04 cm, 51.05 kg, and 19.46 $kg/m^2$ for females (n=250), respectively. The respective daily intakes of total water and bottled natural water as water itself were 670.30 ml and 212.20 ml for males and 488.04 ml and 132.72 ml for females. The daily intakes of Ca, Mg, Fe, Zn, Cu, Mn, Se, and Mo from bottled natural water were 4.76 mg, 2.25 mg, 0.06 ${\mu}g$, 0.44 ${\mu}g$, 1.16 ${\mu}g$, 0.30 ${\mu}g$, 0.40 ${\mu}g$, and 0.71 ${\mu}g$ for males and 2.98 ${\mu}g$, 1.41 mg, 0.04 ${\mu}g$, 0.27 ${\mu}g$,0.73 ${\mu}g$, 0.19 ${\mu}g$,0.25 ${\mu}g$, and 0.44 ${\mu}g$ for females, respectively. Overall, the contents of Ca, Mg, and Se in bottled natural water were relatively high and the daily intakes of these minerals were 0.4~1.0% of the DRIs.

Physicochemical Properties of a Biopolymer Flocculant Produced from Bacillus subtilis PUL-A (Bacillus subtilis PUL-A로부터 생산된 Biopolymer 응집제의 물리화학적 특성)

  • Ryu, Mi-Jin;Jang, Eun-Kyung;Lee, Sam-Pin
    • Microbiology and Biotechnology Letters
    • /
    • v.35 no.3
    • /
    • pp.203-209
    • /
    • 2007
  • Soybean milk cake (SMC) was used for the solid-state fermentation by Bacillus subtilis PUL-A isolated from soybean milk cake. In the presence of 5% glutamate the maximum production of biopolymer (59.9 g/kg) was performed by fermentation at $42^{\circ}C$ for 24 hr. The recovered biopolymer was consisted of 87% $\gamma$-polyglutamic acid with molecular weight of $1.3{\times}10^6$ dalton and other biopolymer. The biopolymer solution showed the great decrease in consistency below pH 6.0, regardless of the molecular weight of PGA. Biopolymer solution has a typical pseudoplastic flow behavior and yield stress. The consistency of biopolymer solution was greatly decreased by increasing heating time and temperature in acidic condition compared to the alkaline condition. In kaolin clay suspension, the flocculating activity of biopolymer was the highest value with 15 mg/L biopolymer and 4.5 mM $CaCl_2$, but decreased greatly with $FeCl_3$. The flocculating activity of biopolymer was maximum at pH5, but decreased drastically by heating at $60{\sim}100^{\circ}C$. In particular, biopolymer with native PGA showed the efficient flocculating activity compared to that of modified biopolymer containing low molecular weight of PGA.