• Journal of Aquaculture
• /
• v.16 no.2
• /
• pp.76-83
• /
• 2003

To improve the efficiency of removal of bacteria and virus with DynaSand Filters used for treatment of recycling wastewater from aquaculture, effect of biofilm formation on bacterial transport through coated sand was estimated. At the neutral pH (pH 7.0), the coated sand was positive of zeta potential (surface charge). Column experiments were also carried out to test the effect of uncoated sand as well as coated sand with Al and Fe. The coated sand influenced more significantly the surface properties, adsorption and transport than the uncoated sand. The leaching batch system investigated for synthetic water showed concentrations of 7.47, 4.80, 20.89 and 7.23 mg/L for the uncoated sand, coated sand with Al, Fe and Al+Fe, respectively. Hence there are significant differences among the tested coatings with reference to bacterial transport and surface properties.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.15-21
• /
• 2011

Arsenic is one of the most abundant contaminant found in waste mine tailings, because of it's carcinogenic property, the countries like United states of America and Europe have made stringent regulations which govern the concentration of arsenic in drinking water. The current study focuses on different treatment methods for removal of arsenic from waste water. Treatment method the high strength arsenic waste water is treated with Fe(III)-ettringite by co-precipitation method. Number of experiments were carried out to decide the optimal dosage of Fe(III)-ettringite to treat arsenic waste water. The Fe(III)-ettringite was synthesized by taking appropriate equivalent ratios of calcium oxide and ferric chloride in proportion to the arsenic. The best removal efficiencies of 94% were observed at a As/(Ca: Fe) ratio of 1:3. The maximum removal of arsenic was observed in pH range of 12. But as the pH increases the arsenic removal efficiency decreases as portlandite is formed in the pH above 12. The analysis of surface of precipitate conform the needle like structure of ettringite. This treatment technique has promising features such as, the chemicals required in the treatment as well as the sludge generated can be reduced. The operating pH range is in alkaline region which is advantageous over traditional treatment process which has lower pH. Also the co-precipitation not only helps in removal of arsenic but also heavy metals.

• The Korean Journal of Pharmacology
• /
• v.31 no.3
• /
• pp.345-353
• /
• 1995

${\beta}-Carboline$ alkaloids including harmaline have been shown to inhibit enzymatically or nonenzymatically induced-lipid peroxidation of microsomes. This study was done to explore the antioxidant ability of harmaline and harmalol on the oxidative injuries of hyaluronic acid, lipid and collagen by $Fe^{2+}$ and $H_2O_2$. Their scavenging actions on reactive oxygen species were also examined. Harmaline, harmalol, superoxide dismutase, catalase and DMSO inhibited both degradation of hyaluronic acid by $Fe^{2+}$ and $H_2O_2$ and lipid peroxidation of microsomes by $Fe^{2+}$. In these reactions, DABCO inhibited degradation of hyaluronic acid but did not affect lipid peroxidation. ${\beta}-Carbolines$ inhibited degradation of cartilage collagen by $Fe^{2+}$, $H_2O_2$ and ascorbic acid. The reduction of ferricytochrome c due to autoxidation of $Fe^{2+}$, which is inhibited by superoxide dismutase, was not affected by harmaline and harmalol. They also did not have a decomposing action on $H_2O_2$. Hydroxyl radical production in the presence of $Fe^{2+}$ and $H_2O_2$ was inhibited by harmaline, harmalol and DMSO. Harmaline and harmalol may inhibit the oxidative injuries of hyaluronic acid, lipid and cartilage collagen by $Fe^{2+}$ and $H_2O_2$ through their scavenging actions on reactive oxygen species, OH and probably iron-oxygen complexes and exert antioxidant abilities.

• The Korean Journal of Pharmacology
• /
• v.27 no.1
• /
• pp.69-80
• /
• 1991

Inhibitory effects of quercetin and rutin on lipid peroxidation of microsomes caused by iron(II) were investigated with respect to the scavenging action for oxygen radicals produced during oxidation of iron and the chelating action for iron. Lipid peroxidation by $Fe^{2+}$ alone was markedly inhibited by quercetin or rutin in a dose dependent fashion. Lipid peroxidation by ascorbate or NADPH in the presence of $Fe^{2+}$ was almost completely inhibited by both quercetin and rutin. The peroxidative action of $Fe^{2+}$ was inhibited by SOD and DABCO and slightly inhibited by catalase, DMSO and mannitol. Quercetin and rutin inhibited oxidation of $Fe^{2+}$ which is responsible for DETAPAC and they showed a significant initial chelating effect. Quercetin and rutin effectively inhibited lipid peroxidation by $H_{2}O_{2}$ and decomposed $H_{2}O_{2}$. Both $OH{\cdot}$ production in the presence of $Fe^{2+}$ and $^1O_2$ production by U.V. irradiation were inhibited by quercetin and rutin. Lipid peroxidations by $Cd^{2+},\;Cu^{2+},\;Ni^{2+},\;Pb^{2+}$ and $Zn^{2+}$ were almost completely inhibited by quercetin. Quercetin and rutin significantly prevented the loss of sulfhydryl groups by $Fe^{2+}$. These results suggest that inhibitory effects of quercetin and rutin on the peroxidative action of $Fe^{2+}$ in the presence or absence of ascorbate and NADPH may be attributable to their scavenging action on reactive oxygen species and chelating action on iron.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.153-159
• /
• 1999

Fifteen microbes have been isolated from Jangja pond in Kuri-Si, Kyeonggi-Do. Among them, two strains showed excellent COD removal from wastewater, which were named Pseudomonas sp. BLP2052 and Flavobacterium sp. BLP20515, respectively. Optimal pH and temperature for the cell growth were 7.0 and $30^{\circ}C$ for both strains. Pseudomonas sp. BLP2052 and Flavobacterium sp. BLP20515 was applied to the reactor to treat wastewater and 66.0% and 65.7% COD (chemical oxygen demand) removal was achieved, respectively. Comparing these results to the case of applying mixed microbes present in Jangja pond, COD removal rate was 15% less. But when adding the selected microbes to the wastewater containing mixed microbes, COD removal rate increased by 5%. After 84 hour operation, we achieved 85.6% COD removal. When inhibitors were added less than 100 ppm, during the microbial wastewater treatment, Fe, Zn, Al, phenol and Cr influenced microbial activity more deterioratively in order. In the case of over 300 pm, Cr, Fe, Zn, Al and phenol showed severe deteriorative effect in order.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.454-459
• /
• 2009

In this paper, we have performed an experimental study to simultaneously remove humic acid (RA) and heavy metals (Cu, Mn, and Zn) from the river water using potassium ferrate(VI), a multi-purpose and environment-friendly chemical. In the experiments for treating three 0.1 mM single heavy metals using 0.03${\sim}$0.7 mM (as Fe) ferrate, the removal efficiencies ranged 28${\sim}$99% for Cu, 22${\sim}$73% for Mn, and 18${\sim}$100% for Zn. In addition, humic acid and heavy metals could be very efficiently removed at the same time using 0.03${\sim}$0.7 mM (as Fe) ferrate: for example, 49${\sim}$81% (humic acid), 93${\sim}$100% (Cu), 22${\sim}$86% (Mn), and 20${\sim}$100% (Zn). The removal efficiencies of humic acid and heavy metals in the mixture of humic acid and heavy metals were higher than that in the solution of single humic acid or heavy metal. It can be explained by the fact that, before adding ferrate to the mixed solution, part of solutes were already removed by the complexation between the negatively-charged functional groups of humic acid and heavy metal cations.

• Resources Recycling
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2003

Mn was extracted by using a nitric acid from the reduced ferromanganese dust and the basic experiments were taken to refine the manganese nitrate solution by means of precipitation of Ca, Mg oxalate. The dust was generated in AOD process producing a medium-low carbon ferromanganese and collected in the bag filter. Manganese oxide content in the dust was about 90% and its phase was confirmed as $Mn_3$$O_4$. $Mn_3$$O_4$ in the dust was reduced to MnO by roasting with activated charcoal. The main impurities in the extracted solution prepared by leaching the reduced dust with nitric acid were Na, K, Fe, Si, Ca, Mg etc. Among them, Fe was removed by controlling pH of the solution more than 4 and precipitating $Fe(OH)_3$, simultaneously silicious material solved in the solution was removed by co-precipitation with the ferric hydroxide. Addition of 150 g reduced dust into 4N HNO3 solution 1$\ell$ was appropriate to control the pH of the solution to pH 4. To differ greatly the solubilities of manganese oxalate and calcium or magnesium oxalate in a solution containing a high concentration of Mn, pH of 4 or less and addition of ($NH_4$)$_2$$C_2$$O_4$ in equivalent with Ca and Mg are recommended. At this time, the higher temperature was the shorter the precipitation reaction time was needed.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.101-110
• /
• 2013

Due to the large specific surface area and great reactivity toward environmental contaminants, nanocrystalline mackinawite (FeS) has been widely applied for the remediation of contaminated groundwater and soil. Furthermore, nanocrystalline FeS is rather thermodynamically stable against anoxic corrosion, and its reactivity can be regenerated continuously by the activity of sulfate-reducing bacteria. However, nanocrystalline mackinawite is prone to either spread out along the groundwater flow or cause pore clogging in aquifers by particle aggregation. Accordingly, this mineral should be modified for the application of permeable reactive barriers (PRBs). In this study, coating methods were investigated by which mackinawite nanoparticles were deposited on the surface of alumina or activated alumina. The amount of FeS coating was found to significantly vary with pH, with the highest amount occurring at pH ~6.9 for both minerals. At this pH, the surfaces of mackinawite and alumina (or activated alumina) were oppositely charged, with the resultant electrostatic attraction making the coating highly effective. At this pH, the coating amounts by alumina and activated alumina were 0.038 and 0.114 $mmol{\cdot}FeS/g$, respectively. Under anoxic conditions, arsenite sorption experiments were conducted with uncoated alumina, uncoated activated alumina, and both minerals coated with FeS at the optimal pH for comparison of their reactivity. Uncoated activated alumina showed the higher arsenite removal compared to uncoated alumina. Notably, the arsenite sorption capacity of activated alumina was little changed by the coating with FeS. This might be attributed to the abundance of highly reactive hydroxyl functional groups (${\equiv}$AlOH) on the surface of activated alumina, making the arsenite sorption by the coated FeS unnoticeable. In contrast, the arsenite sorption capacity of alumina was found to increase substantially by the FeS coating. This was due to the consumption of the surface hydroxyl functional groups on the alumina surface and the subsequent occurrence of As(III) sorption by the coated FeS. Alumina, on the surface area basis, has about 8 times higher FeS coating amount and higher As(III) sorption capacity than silica. This study indicates that alumina is a better candidate than silica for the coating of nanocrystalline mackinawite.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.590-596
• /
• 2012

Enhanced coagulation is best available technologies to treat NOM in water to produce clean drinking water. In this research, the comparison experiments between conventional coagulation (CC) and enhanced coagulation (EC) using 4 type coagulants i.e., ferric chloride, aluminium sulphate (alum), poly aluminium sulphate organic magnesium (PSOM) and poly aluminium chloride (PACl) were performed in terms of surrogate parameters such as dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), haloacetic acid formation potential (HAAFP) and zeta potential variation in order to find out the most effective coagulant and conditions to fit Nakdong River water. When applied to EC process, the turbidity removal efficiency did not increased gradually compared to the CC process when adding coagulants. Furthermore, the removal efficiency of turbidity became decreased much more as coagulants were added increasingly whereas the removal efficiency of DOC, THMFP and HAAFP became increased by 13~18%, 9~18% and 9~18% respectively compared to the CC process. The characteristics of turbidity removal showed relatively high removal efficiency considering the pH variation in entire pH range when using $FeCl_3$ and PACl. Additionally, in case of alum and PSOM steady removal efficiency was shown between pH 5 and pH 8. In terms of DOC surrogate the coagulants including 4 type coagulants indicated high removal efficiency between pH 5 and pH 7. The removal efficiency of dissolved organic matter (DOM) in EC between less than 1 kDa and more than 10 kDa augmented by 11~21% and 16% respectively compared to the CC process. The removal efficiency of hydrophobic and hydrophilic organic matter proved to be increased by 27~38% and 11~15% respectively. In conclusion, the most effective coagulant relating to EC for Nakdong River water was proved to be $FeCl_3$ followed by PSOM, PAC and alum in order.

• 수도
• /
• v.24 no.2 s.83
• /
• pp.68-76
• /
• 1997