• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.25-28
• /
• 2004

The dependence of sensitivity, MR ratio, coercivity (Hc) and switching fields as a function of thickness of each magnetic layers(Co, NiFe and Cu) were investigated in pseudo spin valves with a structure of Ta/NiFe/Cu/Co. As measured results dependence of the thickness of each magnetic layer, we obtained MR ratio of 7.26% for Ta(4 nm)/NiFe(7.5 nm)/Cu(3 nm)/Co(5 nm) pseudo spin valves. Also, we could control properties of magnetoresistance for independent magnetization courses of each magnetic layer. Especially, we found that we could control coercivity as constant MR ratio dependence of Co thickness.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.2
• /
• pp.85-90
• /
• 2000

The influence of transformation cycles (${\alpha}^{\prime}{\leftrightarrow}{\gamma}^{\prime}$) on the microstructure and mechanical properties of lath and lenticular martensites has been studied in Fe-Ni alloys. The width of lath in Fe-15%Ni alloy decreased with increasing the number of transformation cycles, while no appreciable change in dislocation density inside the lath was observed. In case of Fe-31%Ni alloy, a number of dislocations were additionally introduced into the martensite plate after the transformation cycling. Tensile strength and Vickers hardness of lath martensite decreased with the increase in number of transformation cycles, whereas those of lenticular martensite increased up to 1 cycle and then remained constant. Elongation of two alloys was deteriorated after 1 transformation cycling, corresponding to the tensile strength. But the decrement of elongation in Fe-31%Ni alloy was smaller than that in Fe-15%Ni alloy.

• The Journal of Natural Sciences
• /
• v.7
• /
• pp.19-25
• /
• 1995

In this study, the Mossbauer effect of the $NiAl_0.8Fe_1.2O_4$ was investigated in the temperature range of 77K-1000K. The spectra were composed of two component, one is sixtet and the other doublet, at low temperature. From the temperature dependence of Mossbauer spectum, it is appeared that the magnetic properties of $NiAl_0.8Fe_1.2O_4$ varies from ferrimagnetism to paramagnetism as the increasing tempereture. And the magnetic relaxation patterns of the $NiAl_0.8Fe_1.2O_4$ were shown superparamagnetic effect.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.138-143
• /
• 2003

A double spiral thin-film inductor with a NiFe magnetic core is integrated with DC-DC converter IC. The NiFe core is deposited on a polyimide film as the thinckness of NiFe is 2.5~3.5 ${\mu}$m. Then, copper conductor line is deposited on the NiFe core with double spiral structure. Process integration is performed by sequential processes of etching the polyimide film deposited both top and bottom of the NiFe core and electroplation copper conductor line from exposed metal pad of the DC-DC converter IC. Process integration is simplified by elimination planarization process for top core because the proposed thin-film inductor has a bottom NiFe core only. Inductor of the fabricated monolithic DC-DC converter IC is 0.53 ${\mu}$H when the area of converter IC and thin-film inductor are 5X5$\textrm{mm}^2$ and 3.5X2.5$\textrm{mm}^2$, respectively. The efficiency is 72% when input voltage and output voltage are 3.5 V and 6 V, respectively at the operation frequency of 8 MHz.

• Korean Journal of Metals and Materials
• /
• v.49 no.12
• /
• pp.989-994
• /
• 2011

Samples with compositions of 80 wt% Mg-14 wt% Ni-6 wt% $Fe_2O_3$ (named $Mg-Ni-Fe_2O_3$), and 78 wt% Mg-14 wt% Ni-6 wt% $Fe_2O_3-2$ wt% CNT (named $Mg-Ni-Fe_2O_3-CNT$ ) were prepared by reactive mechanical grinding. Hydriding and dehydriding properties and effects of CNT addition on the hydriding and dehydriding rates of $Mg-Ni-Fe_2O_3$ were then investigated. Activation of the $Mg-14Ni-6Fe_2O_3$ sample was completed after three hydriding (under 12 bar $H_2$)-dehydriding (under 1.0 bar $H_2$) cycles at 573 K. The addition of CNT to the $Mg-14Ni-6Fe_2O_3$ sample made the activation process unnecessary, with a small decrease in the hydrogen-storage capacity.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.3-9
• /
• 2007

Although the ferrous material was separated by the magnetic separation before the incineration process, the municipal solid waste incineration bottom ash generated during incinerator in metropolitan area consists of many iron products which account for about $3{\sim}11%$ as well as ceramics and glasses. The formation of $NiFe_2O_4$ and $FeCr_2O_4$ with a $Fe_3O_4-Fe_2O_3$ (similar to pure Fe) on the surface of iron product was found during air-annealing in the incinerator at $1000^{\circ}C$, because Ni and Cr has a chemical attraction about iron is using to coat with Ni and Cr metals for poish or to prevent corrosion. Therefore, Fe-Ni Cr oxide can be formed on durface of the iron product and it can be separated from bottom ash through the magnetic separation. So, in this study, the separation ratio of heavy metals as magnetic separation and mineralogical formation of Fe-ion(heavy metal) in ferrous metals corroded were investigated. As the result, the separation ratio of Ni and Cr based on particle sizes accounted for about $45{\sim}50%$, and Cu and Pb accounted for below 20%. Also, the leaching concentration of Ni and Cr in bottom ash separated by magnetic separation was lower than that in fresh bottom ash.

• Journal of Magnetics
• /
• v.6 no.4
• /
• pp.145-147
• /
• 2001

The effect of interface roughness between [Ni/Mn] superlattice and pinned NiFe layer on magnetoresistance (MR) of [Ni/Mn] superlattice-based spin valve films was investigated. Antiferromagnetic phase structure and interface roughness of [Ni/Mn] superlattice spin valve films were compared in the as-deposited and the annealed samples at 240$\^{C}$, respectively. Surface morphology of spin valves was substantially flattened due to the formation of the antiferromatic NiMn phase. In case of Co insertion between Cu and NiFe, the interlace roughness and MR ratio in the annealed [NiMn] superlattice and pinned NiFe/Co layer increased more than those in the annealed [Ni/Mn] superlattice and pinned NiFe layers respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.63-64
• /
• 2011

니켈 알러지를 일으키지 않는 전주 부품 개발을 위해 Ni을 대체할 수 있는 전주 소재로 Ni-Fe 합금과 Fe에 대한 전주 공정을 개발하였다. Ni-Fe 합금 전주의 경우 전주품의 표면 내식성 강화를 위해 Cr 나노입자를 이용한 복합전주를 실시하여, Ni 전주품과 내부식성, 니켈 용출 비교 분석 실험을 하였다. 또한 Ni을 완전히 배제하기 위해 새로운 시도로서 순 Fe 전주 공정 기술을 개발하였다. 제조된 Fe 전주품의 내식성 향상을 위한 실리카 코팅 등의 표면처리에 대한 효과도 분석하였다.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.163-167
• /
• 2001

The rotation of uniaxial anisotropy field of 700 ${\AA}$ thick sputtered NiFe thin film due to magnetic annealing was investigated. NiFe film was annealed in a magnetic field which is perpendicular to the initial induced uniaxial anisotropy field. The NiFe film becomes nearly isotropic after 1 hour annealing at 160 $^{\circ}C$. With increase of annealing temperature over 160 $^{\circ}C$, the film gets uniaxial anisotropy field again. An abrupt increase of H$\sub$c/ was observed with annealing temperature over 400 $^{\circ}C$. The X-ray diffraction analysis and Auger electron spectroscopy with Ar ion etching showed extensive grain growth in NiFe film with (111) texturing and interdiffusion with adjacent Au electrode layer by 400 $^{\circ}C$ magnetic annealing.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.85-88
• /
• 2008

We calculated the electronic structures of substituted cobalt nitrides, that is $FeCo_3N$ and $NiCo_3Ni$, by using the all electron fullpotential linearized augmented plane-wave (FLAPW) energy band method, and investigated the influence on the magnetic properties of $Co_4N$ due to the substitution of Co atom located at corner sites by iron and nickel atoms. We found that the magnetic moments of CoII atoms located at the face-center positions in these compounds are almost same to that of $Co_4N$. The magnetic moments of Fe and Ni atoms in $FeCo_3N$ and $NiCo_3Ni$ are 3.086 and $0.795\;{\mu}_B$, and they have the localized nature of magnetism.