• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.05a
• /
• pp.100-101
• /
• 2000

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.56-60
• /
• 1993

We have investigated the dependence of the magnetization, anisotropy, coercivity, and Kerr rotation on the Fe concentration in FeCo/Pd multilayer thin films, where the Fe concentration in the FeCo sublayer varied between 0 and 100% with maintaining the same sublayer thickness of $2.5\;{\AA}$ FeCo and $10.5\;{\AA}$A Pd. The maximum saturation magnetization was observed at the Fe concentration of about 48at.% in the FeCo sublayer. Perpendicular magnetic anisotropy and coercivity of the FeCo/Pd multilayer thin film decreased monotonically with increasing the Fe con-centration. The Kerr rotation angle also decreased with increasing the Fe concentration and the amount of vari-ation was remarkably changed with decreasing the light wavelength.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.7-12
• /
• 1997

Amorphous $Fe_{50}Zr_{50}$ alloy has been manufactured by mechanical alloying from pure elemental powders of Fe and Zr in conventional ball mill under an Ar atmosphere. Structure and magnetic properties of the amorphous phase were studied by transmission electron microscopy and SQUID magnetometry. Selected area diffraction patterns taken from the mechanically alloyed powders showed two halo rings, indicating coexistence of Fe rich and Zr rich amorphous phases in mechanically alloyed powder. Curie temperature of the Fe rich amorphous phase, measured by Arrot plot, was 195 K. Fe content in the ferromagnetic amorphous phase, estimated from the Curie temperature, was about 65 at%. Spin wave stiffness constant of $Fe_{50} Zr_{50}$ alloys processed for 100 and 200 hrs were 52.2 and 63.8 meV, respectively. The higher spin wave stiffness constant in 200 hrs milled powders may arise from the precipitation of $\alpha$-Fe by partial crystallization of amorphous phase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.7-12
• /
• 1994

This study was designed to investigate the effects of dietary iron supplementationon ${\delta}-aminolevulinic$ acid dehydratase (DALAD) activity and liver damage of the lead(Pb)-administered rats. The iron (Fe) supplement levels were 100 ppm(Fe100) and 500ppm(Fe500) and the Pb-exposed rats were given 2, 000ppm-Pb in drinking water, while control rats were given neigher iron nor lead. Hematocrit was lower in the Pb, Fe100 -Pb, Fe500-Pb group than in the control, but was not affected by the Pb adminstration when the rats fed the Fe supplementation diet. DALAD activity were reduced by Pb added but, were higher in the Fe500-Pb group than in the Fe100 -Pb group. No significant difference was found in serum Pb content due to Pb administration and Fe supplementation. The liver Pb contentwas higher in the Fe supplementation group than in the Pb-group. Level of serum FE was lower in the Pb added groups than in the control group. Liver Fe contents were increased with Pb administration and higher in the Fe supplement groups than in the Pb-group. Levels of serum and liver copper was decreased with the Fe supplementation. Aminotransferase activity of serum and liver were increased in the Pb group.

• Clean Technology
• /
• v.26 no.2
• /
• pp.145-150
• /
• 2020

Nitrous oxide (N₂O) is one of the six greenhouse gases, and it is essential to reduce N₂O by showing a global warming potential (GWP) equivalent to 310 times that of carbon dioxide (CO₂). Selective catalytic reduction (SCR) is a technology that converts ammonia into harmless N₂ and H₂O by using ammonia as a reducing agent to remove NOx, one of the air pollutants; the process also produces high denitrification efficiency. In this study, the Fe-BEA catalyst was steam-treated at 100 ℃ for 2 h before Fe ion exchange in the fixed bed reactor in order to investigate the effect of the steam-treated Fe-BEA catalyst on the NH₃-SCR reaction. NH₃-SCR reaction test of synthesized catalysts was performed at WHSV = 180 h^-1, 370 to 400 ℃ in the fixed bed reactor. The Fe-BEA(100) catalyst steam-treated at 100 ℃ showed a somewhat higher activity than the Fe-BEA catalyst at 370 to 390 ℃. The catalysts were characterized by BET, ICP, NH₃-TPD, H₂-TPR, and ²⁷Al MAS NMR in order to determine the cause affecting NH₃-SCR activity. The H₂-TPR result confirmed that the Fe-BEA(100) catalyst had a higher reduction of isolated Fe³⁺ than the Fe-BEA catalyst, and that the steam treatment increased the amount of isolated Fe³⁺ as an active species, thus increasing the activity.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.100-100
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.05a
• /
• pp.144-145
• /
• 2000

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.04a
• /
• pp.102-103
• /
• 2001

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.138-143
• /
• 1998

We have investigated the magnetic properties of FeBN and FeSiN films deposited by RF magnetron reactive sputtering system. It was investigated that the compositions of B, Si and N were the main factors influencing the soft magnetic properties and film resistivity. The addition of small amount of N significantly improve the soft magnetic properties and electrical resistivity. The FeBN and FeSiN films were showed good soft magnetic properties which were Hc<1 Oe, Bs:19~19 kG and $\mu$'>1000 values. The composition of films were $Fe_{75}(BN)_{25},\;Fe_{78}(SiN)_{22}$ and resistivity was 100~120 $\mu$$\Omega$-cm. but, futher increase in B, Si and N concentration degraded the soft magnetic properties due to formation of nitride such as $Fe_4N$ compound.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.214-218
• /
• 2011

In this study, we have systematically investigated the effect of sputtering conditions on the microstructural properties of Ag/CoFeB thin film on MgO substrate. It was found that the crystallinity and surface roughness of the Ag film strongly depends on the Ar sputtering pressure and sputtering power. Epitaxial growth of Ag(100) film on MgO(100) substrate was achieved under the sputtering conditions of high sputtering power and elevated temperature. XRR (X-ray reflectivity) and high-resolution TEM (transmission electron microscopy) measurements also revealed the interfacial roughening in the Ag/CoFeB interface due to the island structure formation and intermixing between Ag and CoFeB.