• KSBB Journal
• /
• v.23 no.4
• /
• pp.335-339
• /
• 2008

Biodiesel is an alternative and renewable energy source, which is hoped to reduce global dependence on petroleum and environmental problem. Biodiesel produced from a variety of oil sources such as vegetable oil, animal fat and waste oils, and has properties similar to those associated with petro-diesel, including cetane number, volumetric heating value, flash point, viscosity and so on. In this study, we investigate the effect of quality of raw materials on alkali-catalyzed transesterification for producing of biodiesel. The increase of content of free fatty acid and water in oil were caused the sharp decrease of conversion yield. Also, the low purity of methanol in reactant was inhibited the reaction rate. In the case of addition of sodium sulfate as absorbent to prepare catalyst solution, the content of fatty acid methyl ester in product was increased more about 1.6% than that of control. However, the addition of zeolite, sodium chloride and sodium sulfate as absorbent in reactant to remove water generated from reaction did not show any enhancement in the reaction yield. This result may provide useful information with regard to the choice and preparation of raw materials for more economic and efficient biodiesel production.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1399-1409
• /
• 2019

Biodiesel is a renewable and environmentally friendly liquid biofuel for transportation. Insect is considered as a new valuable biomass to convert into biodiesel. In particular, BSF(Black Soldier Fly) containing high fat is a renewable source of biodiesel. Biodiesel drived BSF has high concentration of saturated fatty acid methyl ester and low concentration of polyunsaturted fatty acid methyl ester which makes it potentially an ideal substrate for producing excellent quality biodiesel. Most of the fuel properties of BSF biodiesel were met the requirements of standard EN 14214. BSF have a higher lipid yield and biodiesel productivity as compared to microalgae and vegetable oils. This review paper includes the overall summary and compilation of the insect research conducted on biodiesel production and includes the BSF biodiesel properties.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.89-95
• /
• 2009

Biodiesel (fatty acid alkyl esters), which is produced from sustainable resources such as vegetable oil, animal fat and waste oils, have used to as substitutes for petro-diesel. In this study, we investigate the performance of 30 L and 300 L pilot-scale biodiesel production system using alkali-catalyst transesterification from soybean oil and rapeseed oil produced at Jeju island in Korea. The 30 L-scale biodiesel production was performed to in the condition of reaction temperature $65^{\circ}C$, catalyst amount 1% (w/w) and oil to methanol molar ratio 1 : 8. At that reaction condition, the fatty acid methyl ester contents of product are above 98% within reaction time 30 min. Also, the conversion yield of over 98% was obtained in 300 L-scale biodiesel production system using rapeseed oil and soybean oil. The quality of biodiesel produced from reaction system was satisfied to recommended quality standard of Korea. Our results may provide useful information with regard to the scale-up of more economic and efficient biodiesel production process.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.483-489
• /
• 2010

Biodiesel has attracted great attention as an alternative renewable energy source for the replacement of petroleumbased diesel fuel, yet its high production cost due to expensive oil feedstock remainsas the major economical obstacle. In this study, we investigated catalysts and reaction conditions for the acid catalyzed pre-conversion of free fatty acid (FFA) to fatty acid methyl ester (FAME) in cheap low-grade oils of high acid value. The NaOH base catalyzed reaction of vegetable oil of the initial acid value of 2 mg KOH/g led to a high FAME conversion above 95.4%, but the conversion abruptly decreased at higher initial acid values. This base catalyzed reaction was practically ineffective displaying the FAME conversion below 15% even at the initial acid value of 10 mg KOH/g by the severe saponification side reaction. Among the various catalysts studied for the pre-conversion of FFA to FAME, Amberlyst-15 was the most effective in reducing the acid value, and the optimum reaction condition identified was $65^{\circ}C$ with oil to methanol ratio of 1:3 and catalyst concentration of 15% (w/w). As the results, great enhancements in the overall biodiesel conversion were achievable via a consecutive reaction of the acid catalyzed FFA pre-conversion to FAME under the optimal condition obtained with Amberlyst-15 followed by the NaOH base catalyzed reaction, far above the extent which was obtainable by the single NaOH catalyzed reaction.

• Korean Journal of Pharmacognosy
• /
• v.38 no.4
• /
• pp.403-408
• /
• 2007

xBrassicoraphanus is an intergenic breed crossed between Brassica campetris L. ssp. pekinensis and Raphanus sativus L. that have been daily consumed. xBrassicoraphanus was known to have good tastes and biological activities. Nevertheless, its constituetnts were not elucidated yet. Thus, in the present study, to indirectly evaluate the biological activity of xBrassicoraphanus, 12 compounds were isolated from leaves and roots of xBrassicoraphanus. On the basis of spectroscopic evidences, the structures of these compounds isolated from leaves of xBrassicoraphanus. were identified as ${\beta}-sitosterol$, indole-3-acetonitrile, ferulic acid, methyl ferulate, linolenic acid methyl ester, linolenic acid and coniferyl alcohol, while the chemical structures of compounds isolated from the roots of were xBrassicoraphanus were characterized as ${\beta}-sitosterol$, indole-3-acetonitrile, ferulic acid, methyl ferulate, linolenic acid methyl ester, 1-methoxyindole-3-acetonitrile, goitrin, 4-hydroxycinnamyl alcohol, coniferyl alcohol, palmitic acid and daucosterol. These can be classified as three steroids, two indole cyanides, two cinnamic acid derivatives, one cinnamyl alcohol derivative, three fatty acid derivatives one isothiocyanate. These results suggest that the compounds isolated from xBrassicoraphanus were almost identical with known components of Brassica campetris L. ssp pekinensis or Raphanus sativus L. However, it is necessary to investigate more about the difference of amounts of constituents according to harvest time and variant species amounts.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.118-125
• /
• 1992

Most of cosmetics are emulsion-type products which contain the sources of nutrition, i.e., vegetable oil, mineral oil and carbohyrate etc.. These additives are usually very susceptible to the contamination by microorganisms. The purpose of this study is to obtain the data necessary not only to prevent dermalopathia occurred by microbials but also to maintain the quality. In this experiment we observed the growth of P.aeruginosa in the cosmetics with or without antiseptics so as to prevent contamination. During the contamination period, the phase became unstable and creaming phenomina was happened together with some discoloration and bad smell. The pH of cosmetic was decreased from 7.6 to 6.0 and the concentration was increased from 1.443 to 1.453 in terms of refractive index during 40 days incubation. By adding antiseptics to the cosmetics, the number of P. aeruginosa from the challenge test method were decreased from $10^8$ cell/ml to $5{\times}10^3$ cell/ml. For the antibacterial effect against P. aeruginosa, p-hydroxy benzoic acid propyl ester in phosphoric acid buffer solution showed the best result.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.72-76
• /
• 2011

In this study, we investigated the characteristics of biodiesel using the waste coffee oil which was extracted by waste coffee grounds. We tried to deduce the optimum conditions by defining the operating variables, such as mole ratio between methanol and coffee oil (6~18) and the reaction temperature ($45{\sim}60^{\circ}C$) in the biodiesel production processes. The performance was evaluated in terms of yields, contents of fatty acid methyl ester (FAME), viscosities, and heating values. The optimum reaction temperature was $55^{\circ}C$. Also, the best biodiesel was produced at the mole ratio between methanol and coffee oil of 12. The highest heating value of the produced biodiesel made from coffee oil was 39.0~39.4 MJ/kg, which satisfies the general standard for the biodiesel energy density, 39.3~39.8 MJ/kg.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.1
• /
• pp.77-83
• /
• 2002

A bacterial consortium capable of utilizing a variety of polycyclic aromatic hydrocarbons has been isolated from a former manufactured gas plant site. The consortium consisted of four members including Arthrobacter sp., Burkholderia sp., Ochrobacterium sp., and Alcaligenes sp., which were identified and characterized by the patterns of fatty acid methyl esters (FAME analysis) and carbon source utilization (BIOLOG system). With the individual members, the biodegradation characteristics of aromatic hydrocarbons depending on different growth substrates were determined. FAME analyses demonstrated that microbial fatty acid profiles changed to significant extents in response to different carbon sources, and hence, such shift profiles may be informative to characterize the biodegradation potential of a bacterium or microbial community.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.284-290
• /
• 2007

Biodiesel and its blend fuels from soybean oil were characterized for their oxidation to apply automobile fuel from the analysis of FAME (fatty acid methyl ester) and chemical properties. Biodiesel produced from soybean oil contained unsaturated fatty acids (> 85 wt%) such as oleic acid, linoleic acid, and linolenic acid. Especially, polyunsaturated fatty acids such as linoleic acid and linolenic acid containing active methyl radical were over 60 wt%. It is believed that linoleic acid and linolenic acid cause oxidation. Linoleic acid and linolenic acid during oxidation were major reactants, and compounds with the carbon number having around 36 (boiling point of about $500^{\circ}C$) were produced from those of radical autoxidation.

• Preventive Nutrition and Food Science
• /
• v.17 no.4
• /
• pp.310-314
• /
• 2012

Thirty-two different volatile oils were identified from Allomyrina dichotoma (A. dichotoma) larvae by gas chromatography/mass spectrometry (GC/MS). The major volatile components were 2,2,4-trimethyl-3-carboxyisopropyl pentanoic acid isobutyl ester (5.83%), phenol,2,6-bis(a,a-dimethyl ethyl)-4-(1-methyl-1-phenylethyl) (5.72%), heptacosane (5.49%) and phenol,2,4-bis(1-methyl-1-phenylethyl) (5.47%). The composition of the fatty acids in A. dichotoma larvae was also determined by gas chromatography (GC) and fourteen constituents were identified. Oleic acid (19.13%) was the most abundant fatty acid followed by palmitic acid (12.52%), palmitoleic acid (3.71%) and linoleic acid (2.08%) in 100 g of A. dichotoma larvae on a dry weight basis. The quantity of unsaturated fatty acids (64.00%) were higher than that of saturated ones (36.00%). The predominant fatty acids in A. dichotoma consist of monounsaturated fatty acid (MUFA, 57.70%) such as oleic acid, myristoleic acid and palmitoleic acid, followed by saturated fatty acids (36.00%) and polyunsaturated fatty acids (PUFA, 6.50%). In particular, the presence of essential fatty acids, such as linoleic (5.30%) and linolenic acid (0.40%) give A. dichotoma larvae considerable nutritional and functional value and it may be a useful source for food and/or industrial utilization.