• Elastomers and Composites
• /
• 제29권2호
• /
• pp.121-130
• /
• 1994

The physical properties of rubber blend between natural rubber(NR) and ethylene propylene diene terpolymer(EPDM) were investigated as a study of EPDM composite materials. For EPDM/NR blends, the effects of ethylene and diene contents in EPDM, blend ratio, dicumyl peroxide(DCP) curing system on the physical properties, interfacial adhesion force and dynamic crack growth etc. were studied. EPDM/NR blends loaded with carbon black were prepared by mechanical mixing and cured by plate heating cure press. Crosslinking density was measured by swelling method with toluene. The physical properties of all blends were measured with Instron, fatigue to failure(FTF), Demattia flex cracking tester(DMFC), scanning electron microscopy (SEM), etc. As the ethylene and diene contents in EPDM increased, the physical properties, such as dynamic crack growth, adhesion to other component were increased too. Interfacial adhesion force of EPDM/NR blends to dissimilar layer was improved by the use of optimum peroxide curing system.

• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.115-123
• /
• 1997

The buckling strength, fatigue strength, stress corrosion cracking are considerably effected on one of initial imperfections, the residual stresses produced by a circumferential weld between axisymmetric cylinders. Therefore, we study the residual stresses, plastic strain and temperature distribution with using thermal elasto-plastic analysis which are generated by a circumferential weld between axisymmetric cylinders. It is investigated that welding residual stresses have an effect on the strength of cylinder for inner and outer shell under external pressure.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.841-843
• /
• 2006

In high-performance cold work applications, tool failure depends on the predominating loading conditions. Typical failure mechanisms are a combination of abrasive wear, adhesive wear, plastic deformation, cracking and edge crumbling. In this paper we demonstrate how the microstructure of tool steels can be positively influenced by modifying the alloying system and the production route to meet the demands of the different loading situations which occur during operation. The investigation was focused on ductility, fatigue strength and wear resistance. Theoretical considerations were confirmed by practical tests.

• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.1085-1090
• /
• 2005

Rod-type fiber reinforced polymer plastics(FRPs) similar to reinforcing steel bars have rarely been considered. In this study, an experiment was performed using beams strengthened with rod-type CFRPs and high-strength mortar overlay. The test results show that the strengthened beams not only had improved endurance limits but also improved load carrying capacities, stiffness values, and cracking loads as compared to a non-strengthened beam. Strengthened beams anchored with bolts throughout their entire span had more efficient structural behaviors, including composite behavior on the interface between the concrete and mortar, and load carrying capacity, than a strengthened beam anchored only on the end block.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.861-864
• /
• 2008

This study was performanced to investigate the fractural and fatigue behavior of ultra-strength steel fiber reinforcement concrete. The tension softening diagram can describe the post-cracking behavior of concrete in tension. In this paper, Three points bending tests with a notch have been carried out to investigate tensile properties of the steel fiber reinforced concrete(SFRC) according to variation of the height. Poly-linear approximation method combined with FEM analysis is applied to the steel fiber reinforced concrete to determine the tension softening diagrams and also to certify the validity of the method. The simulated load-CMOD curves using the determined softening diagrams though the poly-linear approximation method completely agree with the measured ones.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.324-329
• /
• 2004

In this study, an application of crack morphology variables in the Leak-Before-Break(LBB) evaluation for nuclear piping systems is investigated, including influences on the leakage crack size and crack instability loads. The crack surface roughness and the number of flow turns as a function of the crack opening displacement are applied to LBB evaluations for KSNP pressurizer surge line, for which fatigue and stress corrosion cracking are considered as failure mechanisms. As a result, there would be a significant impact on safety margins to acceptance criteria for the surge line if crack morphology variables are applied additionally to the current regulatory guide without re-analyses for justification of safety factors being applied on the leakage crack size and piping loads for evaluations.

• 한국재난정보학회 논문집
• /
• 제5권1호
• /
• pp.30-44
• /
• 2009

Asphalt concrete pavements are often destroyed within the intended design life due to the increasement in traffic volume. The most common types of asphalt concrete pavement damages are permanent deformation and fatigue cracking, and so on. In this research, characteristics of traffic loadings and lateral wheel path distributions are analyzed using the field survey on traffic flow. The obtained traffic characteristics can be used to the decision making for the maintenance policy of roads. According to the traffic lane analysis for the 2nd and 3rd lanes, inner lane vehicles tended to pass to the right side to avoid the opposite side vehicles. In addition, the outside lane vehicles were deviated to the left side to avoid passengers. It is also noted that the lateral wheel path distributions was close to the normal distribution.

• 열처리공학회지
• /
• 제34권1호
• /
• pp.10-16
• /
• 2021

Exhaust manifold is a very important component that is directly connected to air environment pollution and that requires strict mechanical properties such as high temperature fatigue and oxidation. Among stainless steels, the ferritic stainless steel with body-centered cubic structure shows excellent resistance of stress-corrosion cracking, ferromagnetic at room temperature, very excellent cold workability and may not be enhanced by heat treatment. The microstructural characteristics of four cast ferritic stainless steels which are high heat-resistant materials, were analyzed. By comparing and evaluating the mechanical properties at room temperature and high temperature in a range of 400℃~800℃, a database was established to control and predict the required properties and the mechanical properties of the final product. The precipitates of cast ferritic stainless steels were analyzed and the high-temperature deformation characteristics were evaluated by comparative analysis of hardness and tensile characteristics of four steels at room temperature and from 400℃ to 800℃.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.677-687
• /
• 2017

항공기는 운용 중에 엔진, 유압펌프, 공력 등에 의한 진동 환경에 노출이 되어 기계구조와 각종 구성품이 고주기 피로로 인해 균열이나 파괴가 될 수 있다. 통상적으로 항공기용 유압 펌프는 액셜 피스톤 타입이 주로 적용되고 있으며, 펌프의 특성상 연속적인 회전에 의한 유량 맥동 발생은 필연적으로 수반된다. 이러한 유압펌프 맥동에 의한 진동을 감소시키기 위해 설치된 Dampener Fitting의 용접 부위에서 균열이 발생하였다. 용접 부위 균열의 원인 파악을 위해 파단면 분석 및 성분분석을 수행하였고, 균열 방지를 위한 설계 개선사항으로 일체형 Fitting 가공 방식을 적용하였다. 일체형 Fitting의 적용 타당성에 대한 설계검증을 위해 구조건전성 응력 해석, 피로수명 해석, 인증시험 및 항공기 체계 장착 시험을 수행하였다. 개선방안에 대한 해석 결과 재료의 요구수명 및 각종 시험의 요구조건에 만족하는 결과를 얻었으며, 개선방안을 운영 항공기에 적용 할 수 있는 것을 객관적으로 검증하였다.

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6932-6942
• /
• 2014

고속도로는 국가발전의 원동력인 사회기반시설물 중의 하나로 사회발전에 중요한 역할을 담당하고 있으며 고속도로 연장도 계속적으로 증가되고 있으며, 수송의 고속성 뿐만 아니라 안전성, 저공해성, 쾌적성 등 한층 높은 수준의 서비스가 요구되고 있다. 그러나 한정된 고속도로 유지보수 예산으로 보수가 지연되어 포장상태는 계속적으로 악화되고 있는 실정이다. 따라서 본 연구에서는 기존 문헌 및 포장유지보수프로세스 문제점 고찰을 통하여 최적의 고속도로 포장유지보수 관리 체계를 확립하고 개선된 고속도로 포장유지보수 업무 프로세스를 제시하여. 한정된 예산 내에서 최소 비용으로 최대 서비스 제공이 가능한 장수명 포장관리 체계의 확립과 포장의 내구수명을 연장 할 수 있는 현실적으로 실무에 적용이 가능한 효율적인 고속도로 포장유지관리가 가능토록 하고자 한다. 본 연구에서 제시한 개선된 유지보수프로세스를 검증한 결과, 기존 방법보다 공사일수 감소, 공사비 및 유지관리비 절감의 효과가 있었다.