• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.143-150
• /
• 1998

The evaluation of joint fatigue strength of light weight materials for electrical vehicle body has been performed through single lap joint tests with the design parameters such as joint style, adherend, bonding overlap length and bonding thickness. Fatigue strength was evaluated through 5-Hz, tension-tension, load controlled test with the stress ratio zero value. It is experimentally observed that fatigue strength of joint increases for the increase of overlap length. The combinations of Al-Al and Al-FRP adherends show that fatigue strength of joint is hardly changed for the increase of bonding thickness, but FRP-FRP adherend specimen shows that fatigue strength of joint increases after decreases for the increase of bonding thickness. Al-Al adherend specimen has much higher fatigue length than Al-FRP and FRP-FRP adherend specimens. Riveting at adgesive bonded joint gives little effect on fatigue strength.

• 한국안전학회지
• /
• 제7권3호
• /
• pp.99-107
• /
• 1992

Weld bonding can be applied as a combined method of spot welding and adhesive to have more advantages than those. Weld bonding has many merits that enlarge the fatigue strength of spot Welding and also improve the creep of adhesive. But it has not beer proved well in the various environmental conditions. In this study, weld bonding test for fatigue properties and tensile strength is presented under such various coditions as temperatures, humidity, and etc.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.755-759
• /
• 1988

Laminated Composites, SS41-Cu-SS41 plates are made by brazing bonding and hot bonding process. Fatigue repeated plane bending tests are carried out and the fracture behavior of Laminated composites, SS41-Cu-SS41 plates are compared with that of homogeneous steel, SS41plates. The following results are obtained; (1) The fatigue life of the brazing bonding plates is higher than those of SS41 plates and hot bonding plates under high stress. (2) The relations between the fatigue crack growth rate, da/dN and stress intensity factor are, da/dN=4.7*10$^{-10}$ $K^{3.20}$, for SS41 da/dN=7.8*10$^{-9}$ $K^{2.43}$, for CAH da/dN=3.6*10$^{-9}$ $K^{2.54}$, for CAB da/dN=1.58*10$^{-9}$ $K^{2.94}$ , for PAH da/dN=1.23*10$^{-9}$ $K^{2.69}$, for PAB

• 한국안전학회지
• /
• 제25권1호
• /
• pp.1-8
• /
• 2010

The tensile and fatigue experiments were conducted with tensile-shear specimens for investigating the strength of adhesive bonded and mechanical press joints of SPCC steel sheet used in the field of the automobile industry. The optimal punch press force was evaluated 50kN for combining epoxy adhesive bonding and mechanical press joining with a diameter of 8.3mm using SPCC sheet with a thickness of 0.8mm. The combining epoxy adhesive bonding and mechanical press joining exhibits the maximum tensile force of 750N. The fatigue strengths of the combination of adhesive bond and mechanical press joint and pure adhesive joint were evaluated 370N and 320N at 106cycles, respectively. These values correspond to 22% and 20% of their maximum tensile forces, respectively. However, the fatigue strength of the combination of adhesive bond and mechanical press joining was much lower than that of pure mechanical press joining.

• 비파괴검사학회지
• /
• 제16권2호
• /
• pp.79-85
• /
• 1996

복합 재료의 single-lap 및 double-strap adhesive bonding joint 시험편에서 피로 및 인장시험시 방출되는 AE 신호의 분석에 의한 피로 수명 예측 및 파괴 과정의 감시에 대한 연구를 수행하였다. Bonding 시험편의 피로시험시 AE event의 발생양상은 피로에 의해 축적된 elastic strain energy의 방출과 관계되며, peak amplitude가 높고 event duration이 긴 event의 발생 영역과 peak amplitude가 낮고 event duration이 짧으나 많은 event가 발생되는 영역으로 나눌 수 있었다. 그리고 두 영역 사이의 경계 cycle은 피로 수명의 70-80% 근방에 존재하였으며, 이를 이용한다면 피로 수명의 예측이 가능하리라 판단된다.

• Advanced Composite Materials
• /
• 제16권1호
• /
• pp.31-44
• /
• 2007

The purpose of this study is to improve the examining and understanding of the bonding behavior of Fiber Reinforced Polymer (FRP) sheets bonded to concrete blocks and steel plates under fatigue loading. First, a series of experimental investigations is summarized in the paper. The fatigue behavior of bonding surface between FRP sheets and concrete is finally characterized by the conducted P-S-N diagram representing the relationship among the probability of FRP debonding (P), the bond stress amplitudes (S), and the number of cycles (N) at debonding on a semi-logarithmic scale. The different debonding modes for various fracturing surface are also investigated and evaluated.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.7-12
• /
• 2009

The tensile and fatigue experiments were conducted with tensile-peel specimens for investigating on strength of adhesively bonded and mechanical press joints of aluminum sheet used in the field of the automobile industry. The combining epoxy adhesive bonding and mechanical press joining exhibits an increase in joining force as a result of interaction between static forces of the two joining methods. The fatigue strength of pure adhesive joint was measured as 91% of that of the combination of adhesive bond and mechanical press joint, suggesting that the interaction between the bonding and mechanical joining was about 9%.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.69-75
• /
• 1997

A A12024-T3 plate has been reinforced with AFRP to be a Hybrid-Composite, APAL. The fatigue life of the APAL has been investigated. The effects of bonding surface, numbers of AFRP bonded and AFRP orientation on fatigue life have been compared with A12024-T3 plate. Fatigue life of APAL has been remarkedly increased compared with that of A12024-T3 plate. The fatigue life has depended on bonding surface and AFRP orientation, but no relationship could be found with numbers of AFRP laminates.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.615-620
• /
• 1997

Further to static test on aged RC bridge slabs strengthened with TYFO glassfibers, fatigue tests have been done on aged RC bridge slabs with and without glassfibers. It can be seen from the test that fatigue behaviors of aged RC bridge slabs stiffened with TYFO glassfibers have been by and large improved comparing with those of aged RC bridge slabs without TYFO, but fatigue failure modes have not been changed become of bonding failure between tensile reinforcements and concrete. It is in particular noted from the test that bonding failure between concrete surface and TYFO have been observed. Further tests are strongly necessiated to develop appropriate anchoring method for improving fatigue life of aged RC bridge slabs strengthened with TYFO glassfibers.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.101-108
• /
• 2008

본 연구에서는 철근과 같은 기계적 맞물림 현상을 활용하기 위하여 이형리브가 형성되어 있는 GFRP 보강근을 제작하여 철근대체 재료로 사용하기 위해 FRP 보강근의 부착성능을 규명하고자 한다. 하지만 지금까지 많은 기존 연구자들이 부착성능에 대한 실험으로 단순 1방향(수직, 수평)인장실험으로 철근과 콘크리트 또는 FRP 보강근과 콘크리트사이의 부착특성을 고찰하여 두 재료 사이의 부착-슬립에 관한 제안식을 도출해왔다. 국내에서는 아직까지 GFRP 보강근의 부착에 대한 관심이 증대대고 있는 실정이지만 피로부착에 관한연구는 미흡한 편이이어서 GFRP 보강근의 피로 연구가 필요로 하다. 본 연구에서는 BRITISH STANDARD에서 규정하고 있는 방법에 의하여 휨 부착 시험체를 제작하여 정적 휨 부착실험 최대파괴하중의 70% ~ 90%의 하중으로 반복하중재하 후 정적실험을 통하여 GFRP로 보강된 콘크리트 피로부착 성능을 검증하였다.