• Elastomers and Composites
• /
• 제53권4호
• /
• pp.220-225
• /
• 2018

Resilient pads play a major role in reducing the impact of loads on a rail in a rail-fastening system, which is essentially used for a concrete track. Although a compression set test is commonly used to measure the durability of a resilient pad, the static spring constant is often observed to be different from the fatigue test. In this study, a modified compression set test method was proposed to monitor the variations in the compression set and static spring constant of a resilient pad with respect to temperature and time. In addition, the life of the resilient pad was predicted by performing an acceleration test based on the Arrhenius equation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.298-301
• /
• 1990

This paper presents technologies to improve the control of an impact wrench. Impact wrench is a tool which is held by the electro-mechanical manipulator and used to fasten and loosen the bolts for remote maintenance of equipment in hostile environment. Vision system was developed to measure the distance and improve the positioning of the impact wrench. The vision system used two laser beams with a CCTV camera. Also, a torque adjusting method was developed to limit the fastening torque.

• 한국IT서비스학회지
• /
• 제22권6호
• /
• pp.87-102
• /
• 2023

Existing child car seats do not have a monitoring means for the driver or guardian to effectively recognize the status of whether the seat belt of car seat is fastened and whether the ISOFIX of the car seat is fastened to the inside device of the vehicle. In this paper, we propose a smart car seat system which can monitor in real time, whether the seat belt of a child seated in the car seat is fastened and whether the ISOFIX of the car seat is fastened. The proposed system has been developed with a prototype, in which a Hall sensor, magnet, Bluetooth, and display device are used to detect whether these are fastened and to display the detection results. The prototype system provides the detection results as texts and alarm signal to the display for driver or guardian' smartphone in the car in motion. With functional tests of the prototype system, it was confirmed that the detection functions are properly operated, and the detection results were transmitted to the display device and smartphone via Bluetooth within 0.5 seconds. It is expected that the development system can effectively prevent safety accidents of child car seats.

• 한국생활과학회지
• /
• 제5권1호
• /
• pp.55-64
• /
• 1996

The aim of this study is to get the basic data to design the clothing for the female teachers. In this study, we survey the practice of the wear in the spring and the fall of the 422 female teachers in primary, middle and high school, and their wearing sensation according to clothing construction factors. The results are as follows: first, the female teachers frequently wear blouse and skirt, jacket and blouse, jacket and T-shirts, cardigan and T-shirts in upper wear. Second, most female teachers had troubles in their clothing at work. They had serious troubles in writing on the blackboard, due to the improper form and. length of the sleeves, and the inconvenience of their skirt is due to the improper length, while they go up the strains. Third, the comfortable factors of the female teachers' blouse are as follows; round neck line, soutien and peter pan collar, sleeve attatched bodice with a little loose armhole, $10{\sim}20cm$ under from waist in length, front slit, and fastening bottons. In case of skirt, they perceive A-lined, flared, pleats skirt more convieniently than tight one, which are 10cm under from kneeline in length, side fastening system, back slit.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.312-316
• /
• 1987

A simple hybrid circuit to control the two-phase AC motor of the nut-runners which employ the tightening torque control system is described in this paper. The circuit has emphasis on the low-cost implementation. The circuit constitutes of the V/F converter using a timer IC, the pulse width modulator using the fastening torque signal and the two-phase logic sequencer.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.207-212
• /
• 2002

The actual buckling of the railroad track structure is suspected to be a complex interaction between the vertical, lateral and torsional modes. To make the analysis tractable, however, most studies restrict themselves to either the vertical or the horizontal plane. Based on a comprehensive and realistic three-dimensional track model developed in the previous study, three dimensional buckling analysis of CWR track subjected to temperature load was performed. Using the study on buckling temperature and mode, sensitivity of track components such as tie spacing, ballast resistance, stiffness of pad-fastening system and rail size were investigated.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.35-42
• /
• 2019

현재 자동차 산업과 함께 발전하고 있는 전자제품을 포함하는 전반적인 제조업 분야에서 초정밀 제어를 요하는 너트 체결기가 요구되고 있고 너트 체결시의 중요한 성능 요소는 체결력 부족에 의한 풀림과 과도한 체결에 의한 파손 및 강한 진동이나 외부 충격에 강건한 체결력 유지 등 조립 품질의 유지와 향상 및 제품 수명 보장을 위해 정확한 조임 토크, 각도 등이 요구된다. 현재 너트런너라는 제품명으로 판매되는 너트 체결기는 고토크 및 정밀토크제어, 정밀 각도제어 그리고 생산량 증대를 위한 고속운전 등의 특성들이 필요하며 고출력이 가능한 BLDC모터 및 너트체결기 전용의 정교한 토크제어에 필요한 고정밀 토크제어드라이버와 고속, 저속, 고응답의 정밀 속도 제어시스템의 개발이 요청되고 있으나 현재 고객이 요구하는 고정밀, 고토크 및 고속 작업특성을 만족시키지 못하고 있다. 따라서 본 논문에서는 정확한 체결 토크 및 고속 회전에서도 저진동 및 저소음을 구현할 수 있는 d축, q축의 좌표변환에 의한 벡터제어와 토크제어기반의 BLDC모터 가변속 제어와 너트런너의 제어 기술을 제안하고 여러 실험을 통해 성능 결과를 분석하여 제안한 제어가 너트런너 성능을 만족하는지를 확인 하였다. 또한 일단 운전 체결 방식(One Stage 운전 체결 방식)으로 패턴을 프로그램하여 10,000[rpm] 고속 운전 후 목표 토크로 정확히 체결됨을 확인하였으며 토크 리플에 의한 가체결 토크 검출의 문제점도 외란관측기을 사용하여 해결하였고 실험을 통해 검증하였다.

• 복식
• /
• 제66권1호
• /
• pp.108-121
• /
• 2016

The objective of the study is to propose diverse knitwear designs by expanding the scope of the use and application of knit fabric. The study looked into diversifying the knitwear designs by using different types of zippers and with the combination of the diversity given by the zipper used in attachable and detachable method and the traditional North European knit patterns. One way of contributing to the diversity of fashion design is to use the zipper, as it can be implemented as an attachable and detachable fastening system. Also, the combination of North European traditional knit patterns with knit fabric can create a new and unique knit styling. The content of the research focuses on the history and definition of North European traditional knitwear based on the analysis of theoretical background, types, and characteristics of the knit patterns. Case studies were observed to show the application of knit patterns. The methods of the study used are preceding research along with research, collection, analysis of data, information from Korean and foreign literature, and Internet websites. During knitwear production, the two types of zippers were used in combination with four traditional Northern European knitwear Aran, Fair Isle, Nordic, and Ropy. The knitting techniques applied in the process were cable fisherman (5GG, SES 124CS) and Tubular Jacquard (3GG, 7GG, SES 122CS) for knitting machinery, and the technique of whole garment for hand knitting.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.303-309
• /
• 2005

본 연구에서는 국내 원전에서 기기 정착을 위하여 가장 널리 적용되는 직매형 앵커기초를 대상으로 앵커기초의 인장 설계기준에 대한 적정성을 검토하기 위하여 수치해석이 수행되었다. 본 연구에서 수치해석모형에 적용된 파괴기준으로서 콘크리트와 같은 유사 취성재료에는 Microplane모형이, 앵커볼트와 같은 연성재료에는 탄성-완전 소성모형이 적용되었다. 그리고, 균열 발생현상을 모사하기 위하여 분산균열모형을 채택하였다. 개발된 수치해석모형은 다양한 경우의 실증시험결과를 근거로 신뢰성이 검증되었으며, 검증된 수치해석모형과 앵커볼트의 유효매입깊이를 변수로 한 다양한 경우에 대한 수치해석을 통하여 직매형 앵커기초의 인장설계기준으로서 적용이 가능한 ACI 349 Code와 CEB-FIP Code가 평가되었고, 그 보수성이 확인되었다.

• 한국의류학회지
• /
• 제32권9호
• /
• pp.1397-1406
• /
• 2008

This research was to develop Taekwondo trunk protector(Hogu) and head protector's sizing systems corresponding the regulations by World Taekwondo Association. These sizing systems were established using 2003-2004 Size Korea anthropometric data. The result can be summarized as follows: According to the analysis of correlation, most measurements had high relationship with weight for Hogu and head girth for head protector. Six sizes(47, 54, 59, 64, 70, 76) for Hogu and 4 sizes(52, 54, 56, 60) for head protector were suggested in this study. Hogu sizes indicate body weights and head protector sizes express head girth measurements. By the comparison between current Hogu sizes and new sizes, the smaller sizes of new Hogu were bigger than current sizes in bust girth, back fastening length, shoulder length. On the other hand, the bigger sizes of new Hogu were larger than current sizes in bust girth, back fastening length, shoulder length. In addition, new Hogu's lengths were shorter than current Hogu in all sizes. The lengths of Neck to collar bone in new Hogu sizes were longer than current Hogu. In case of the head protector, there were no measurements besides outer circumference of helmet in recognized specifications of WTF. Therefore some referable measurements such as head girth, head length, bitragion arc, sagital arc were suggested in new size specification. When helmet sizes were suggested, the thickness of the NBR foam also were considered.