• 제목/요약/키워드: Fastening

검색결과 296건 처리시간 0.022초

볼타입 분리볼트의 분리현상 연구 (A Study of Separation Mechanism in Ball Type Separated Bolt)

  • 이응조;구송회;장홍빈;이방업
    • 한국추진공학회지
    • /
    • 제15권2호
    • /
    • pp.62-67
    • /
    • 2011
  • 현재의 많은 유도무기들은 발사관에 장착되어 이동된다. 발사관이란 유도탄등이 외부환경에 노출되지 않도록 유도탄을 보호하고, 발사시 유도탄을 가이드 하는 역할을 한다. 발사관에 장착되어 있는 유도탄은 발사관에 견고하게 장착되어 이동되어야 하며, 작전시 원하는 시간에 분리되어야 한다. 이를 위하여 구조적인 안전성이 크고, 분리 응답이 빠른 파이로 장치인 폭발볼트가 많이 사용된다. 폭발볼트는 화약의 폭발력에 의해 볼트몸체가 절개됨으로써 볼트에 의해 결합되고 있던 부분이 분리되는데, 폭발 볼트는 분리시 파편, 화염 및 pyro-shock이라는 큰 진동과 충격을 수반하므로 정밀한 유도무기에는 사용이 제한된다. 이와 같은 문제점을 해결하기 위하여 압력카트리지에서 발생하는 압력을 분리력으로 사용하여, 충격이 작고, 분리파편이 발생하지 않는 분리장치인 볼타입 분리볼트를 개발하였다. 본 연구에서는 볼타입 볼트의 분리현상을 분석하고, 볼타입 분리볼트의 분리 안전율을 정량적으로 제시하였다.

도시철도 궤도구조별 궤도지지강성 평가를 위한 실험적 연구 (A Study on the Evaluation of Track Support Stiffness on the Various Track Type in Urban Transit)

  • 이동욱;박용걸;최정열
    • 한국철도학회논문집
    • /
    • 제14권3호
    • /
    • pp.262-270
    • /
    • 2011
  • 궤도지지강성은 차량이 주행함에 있어 궤도와 차량에 매우 큰 영향을 미치며, 이는 궤도 파괴이론에 근거한 궤도유지관리와 승객의 승차감에 영향을 준다. 또한 궤도설계 시 고려되는 궤도지지강성은 이론에 근거한 계산치이며 이는 공용중인 궤도에서의 실제 궤도지지강성과는 상이하다. 따라서 본 연구에서는 현장측정을 통해 동적 윤중과 레일수직변위, 레일저부응력을 측정하여 궤도지지강성을 산출하였고 이를 이론 궤도지지강성과 비교 분석하였다. 현장측정결과 자갈도상궤도에서의 궤도지지강성은 자갈의 상태에 직접적인 영향을 받으며 콘크리트궤도의 경우 궤도구조별(일반적인 침목매입식, 레일플로팅, 침목플로팅) 궤도구조특성에 직접적인 영향을 받는 것으로 나타났다. 그러나 자갈 및 콘크리트궤도 모두 설계 시 적용되는 궤도지지강성이 측정된 궤도지지강성에 비해 과소평가되는 것으로 분석되었다. 이는 공용중인 궤도의 상태평가 시 현장의 궤도상태를 반영하지 못한 예측 및 평가가 될 소지가 있을 것으로 판단된다. 이에 본 연구에서는 궤도구조형식 및 궤도상태별 궤도지지 강성의 범위를 실험적으로 제시하였다.

앵커볼트 체결 Slit형 강판 보강 RC보의 전단거동에 관한 실험적 연구 (An Experimental Study on the Shear Behavior of Reinforced Concrete Beams Strengthened by Slit Type Steel Plates with Anchor Bolt)

  • 이춘호;정우동;심종석
    • 콘크리트학회논문집
    • /
    • 제22권5호
    • /
    • pp.703-710
    • /
    • 2010
  • 기존 구조물에서 RC보는 여러 가지 이유로 불충분한 전단에 대한 문제에 직면하게 된다. 전단내력이 부족한 RC보의 전단 보강방법으로 강판이 널리 사용되고 있다. 본 연구에서는 앵커볼트가 체결된 경사, 수직 슬릿형 강판의 표면부착에 의해 전단보강된 RC보에 대한 실험을 하였으며, 여러 형태의 앵커볼트 체결 슬릿형 강판으로 보강된 RC보에 대한 전단보강효과, 파괴모드 및 전단내력을 평가하는 것을 연구의 목적으로 하였다. 실험의 변수는 앵커볼트가 부착된 슬릿의 폭, 간격, 경사각 및 수직 길이로 하였다. 연구 결과, 에폭시 부착과 볼트 체결로 보강된 슬릿형 강판 실험체의 파괴 유형은 최대하중 시 전단파괴 모드로 나타났다. 휨균열은 보의 인장측에서 최초로 발생하였으며, 경사 균열은 전단스팬에서 발생하였다. 최종적으로 에폭시 부착과 볼트 체결로 보강된 슬릿형 강판에서의 급격한 박리현상은 지연되었으며, RC보의 본체로부터 완전하게 분리 되지는 않음을 알 수 있었다.

장섬유강화 복합재료 구조물의 기계적 접합을 위한 스테인레스 강 인서트 설계 (Design of a Stainless Steel Insert for Mechanical Joining of Long Fiber-reinforced Composite Structures)

  • 이성우;장승환
    • Composites Research
    • /
    • 제31권4호
    • /
    • pp.139-144
    • /
    • 2018
  • 장섬유강화 복합재료는 기존의 연속섬유강화 복합재료에 비해 우수한 생산 효율성과 복잡한 형상의 성형성에 대해 장점을 가지고 있다. 하지만 지나치게 복잡한 복합재료 형상을 제작하거나 서로 다른 재료로 제작된 부품들을 조립/체결해야 하는 경우 다양한 접합 방법들이 필요하다. 일반적으로 LFPS(Long Fiber Prepreg Sheet)는 성형 후 탈형을 쉽게 하기 위해 LFPS안에 이형제가 포함되어 있다. 그러므로 적절한 접합 강도를 위해 접착법과 더불어 기계적인 체결이 요구된다. 본 연구에서 열성형 공정을 통해 LFPS를 경화하고 스테인레스 강 인서트를 접착하는 동시경화 접착을 위한 스테인레스 강 인서트를 제안하였다. 성형공정 동안 펼쳐지는 스테인레스 강 인서트의 날개는 접착력과 기계적인 고정(Mechanical wedging)의 효과를 유발하여 인발력에 저항할 수 있는 갈고리 역할을 한다. 복합재료에 삽입된 인서트 날개들의 펼쳐진 상태를 확인하기 위해 소각 방법을 사용하였다. 그리고 접합 강도를 정량적으로 평가하기 위해 인발시험(Pull-out test)을 수행하였다. 이러한 실험들을 통해 가장 적절한 접합 강도를 보장하는 조건을 도출하였다.

영ㆍ정조 시대의 속화에 나타난 18C 복식에 관한 연구 -오명현, 윤용, 이인상, 강희언, 작품을 중심으로- (A Study of Costumes of the 18th Century, Appearing in Genre Paintings from the King Young-Cho Period to the King Jung-Cho Period: Focused upon the Works of Focused upon the Works of Mung-Hyun Oho, Yong Yun, In-Sang Lee, Hee-Eon Kang)

  • 최은주
    • 복식문화연구
    • /
    • 제12권5호
    • /
    • pp.859-879
    • /
    • 2004
  • As a result of research, the characteristics of the general costumes from the king Young-Cho period to the king Jung-Cho period in Genre Paintings of Mung-Hyun Oho, Yong Yun, In-Sang Lee, Hee-Eon Kang follows. First, the typical man wore his hair in a topknot(sangtu), and put on 'Bung-gu-ji', 'Lip', or a scarf on his head. The length of the 'Jeogori'(Korean traditional jacket) was long enough to cover the waist. Dress for work had side slits, and had half length sleeve Jeogori, and short pants looked like 'Jam-bang-i'. They went barefoot and wore 'Jipsin'(Korean traditional straw shoes). Dress for outdoor was 'Po' that knot at front of chest by band. 'Baji'(slacks) were with knot below knee, worn 'Hang-jun'(ankle band) and the width of slacks was suitable. They were 'Beoseon'(Korean traditional socks) and shoes. Second those in the upperc1ass and those in the military put on 'Mang-geon', 'Gat', 'Sa-bang-gan', 'Tang-geon', 'Bok-geon' on their head on a topknot. Most of them wore 'So-chang-i', 'Jung-chi-mag' or 'Do-po'. The length of Jeogori covered the waist or the hip and were tied with 'Go-rum'(ribbon). Baji was tied with Hang-jun and 'Dae-nim'. The waist of the slacks were tied with a dark colored waist-band and folded down their waist of slacks. They wore white color Beoseon and 'Hye' or dark color leather shoes. They wore 'Sup'(assistant of arm) for bow. It showed the lifestyle of the 18C with fan, 'Be-ru', 'Mug', 'Yun-jug', teacup, pot, etc. Third, child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line, Git of Jeogori was 'Dunggurai-Kit'(shape of round) and other style Jeogori, which reached the hip line, had side-slit. Baji was tied with Dae-nim, and the width of the slacks is suitable. They hang 'Yum-nang'(Pocket). Final, most women worked outdoors wearing their hair in a high twisted style, or covered it with scarf. They wore Jeogori and 'Chima'(Korean traditional skirts), Bagi. They folded up the sleeves of the Jeogori. And they folded the 'Jambang-i-styled' pants to just above the knees, fastening at the waist. When they wore skirts, they also wore underpants under the skirt that went down to the knees. Most of them went barefoot and wore straw shoes, Jipsin. Through genre paintings, we can understand the ways and forms of our ancestor's clothing. And with our understanding, interest, and passion, we can be familiar with Hanbok in our daily life by succeeding and creating its peculiar style. And then we can promote the globalization of Hanbok.

  • PDF

볼트 구멍 크기에 따른 TS 고력볼트 접합부 거동 평가 (Evaluation on the Behavior of Slip Critical Joints with TS High Strength Bolts Subjected to a Size of Bolt Holes)

  • 이현주;김강석;나환선;이강민;김현철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권2호
    • /
    • pp.136-143
    • /
    • 2011
  • 고력볼트의 현장 조립시 볼트 구멍 간의 불일치로 인하여 볼트 구멍을 확장하는 경우가 빈번하게 발생하고 있으며, 이를 위해서 외국 기준에서는 볼트 구멍 크기, 형태, 하중 방향에 따라 미끄럼하중에 대한 규정을 따로 두고 있다. 그러나 우리나라의 경우 과대구멍에 대한 시방규정이나 이에 대한 접합부 특성에 관한 연구는 미흡한 실정이다. 따라서, 접합부재 표면처리와 볼트구멍 크기의 변화가 접합부 내력에 어떠한 영향을 미치는 지를 실험을 통해 정량적으로 평가할 필요가 있다. 본 연구에서는 볼트 구멍 크기 및 형태에 따른 접합부의 미끄럼하중의 변화와 체결 후, 장기축력이완의 경향을 분석하기 위하여 160시간 및 800시간 동안 고력볼트의 축력의 변화를 측정하였다. 본 실험대상 고력볼트로 KS B 2819에 규정된 TS(Torque Shear)형 고력볼트를 사용하였다. 표준 볼트구멍 대비 그 외 볼트구멍의 미끄럼하중의 변화는 10% 미만으로 나타났으며, 장기축력이완은 직경 2.5배의 슬롯구멍에서, 2.66%로 가장 높게 나타났다.

지속하중과 환경영향을 받은 MF-FRP 보강보의 구조건전성 평가 (Structural Integrity Evaluation of Mechanically Fastened FRP Beams Under the Effects of Sustained Loads and Environments)

  • 이재하;김우석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권1호
    • /
    • pp.10-18
    • /
    • 2014
  • 못과 앵커를 이용하여 FRP를 콘크리트에 부착시키는 MF-FRP 공법은 에폭시를 이용하여 콘크리트 구조물을 보강시키는 외부 부착 FRP 보강 공법에 비하여 더 많은 연성을 부여하는 것으로 많은 연구를 통하여 확인되었다. 이러한 MF-FRP 공법의 사용은 앞으로 증가할 것으로 예상된다. 그러나 MF-FRP 보강법의 환경영향에 대한 평가에 대해서는 현재 연구가 전무한 상태이다. 본 연구에서는 환경의 영향으로부터 MF-FRP 구조물이 구조건전성을 유지할 수 있는지 6개월의 기간 동안 환경조건을 구성하여 보강보의 거동을 비교 평가하였다. RC보에 MF-FRP 보강 공법을 적용시킨 후 지속하중을 가하는 조건과 함께 서중온도 ($40^{\circ}C$) 및 외기환경 조건에 6개월 (10월-3월)의 동절기 기간 동안 보강보를 노출시켰다. 이후 4점 휨실험을 수행하여 각 시험체의 구조건전성을 평가한 결과 본 연구에서 제시한 환경 조건에서는 MF-FRP 보의 강성 변화나 파괴모드의 변화가 발생하지 않아 구조건전성이 유지되는 것으로 나타났다. 보의 파괴모드는 FRP의 박리와 콘크리트의 파쇄에 의해 결정적인 영향을 받으며 못과 앵커로만 연결된 FRP와 콘크리트의 부착성능은 파괴모드에 영향을 주지 못하는 것으로 나타났다.

여객선사고의 원인분석 -정책불응의 관점을 중심으로 (An analysis of th cause of passenger ship accident -from the perspestive of policy non-compliance)

  • 배점모
    • 해양환경안전학회지
    • /
    • 제3권1호
    • /
    • pp.51-71
    • /
    • 1997
  • As passenger ship accidents so frequently have occurred, crisis consciousness is highly aroused in Korean society. Although bombastic policy guidlines were suggested in accordance with every passenger ship accident, there remains a still high possibility of such an accident reoccurring because passenger ship accidents occur from the perspective of non-compliance. The research objective of this study is to government's safety regulatory policies. Data for the analysis was collected from literature review. A Case study related to passenger ship accident is adopted for the analysis. The research methods utilized in this study consist of extensive quantitative analysis of 138 passenger ship accidents which had happened over last 10 years from 1984 to 1993 in Korea and a qualitative analysis of the passenger ship accident of the Seohae Ferry in October 1993. The results of the quantitive analysis on the 138 passenger ship accidents are as follows; Seeing the accidents yearly, the accidents which occurred by policy non-compliance are still exist, only somewhat reduced as years gone by. Seeing the accidents from the perspective of types of accident, fire accidents and death and injury accidents had more non-compliance factors than contact accidents and one-side collision accidents, etc. had. Seeing the accidents from the perspectives of types of passenger ship, large ships like car ferries and general passenger ship accidents had more non-compliance factors than any other kinds of ships had. Seeing the accidents from the perspectives of tons of passenger ships, large ships weighing more than 1, 000 tons and small ships weighing less than 50tons contained a lots of non-compliance factors. The results of the qualitative analysis of the passenger ship accident of the Seohae Ferry in Octovber 1993 are as follows; From the viewpoint of the human factor, there were non-compliance to the recruiting of required number of qualified crew members and non-compliance to the rule which prohibited them from leaving port in bad weather and high wave conditions. From the viewpoint of the ship factor, there were defects in the ship. So we might say that there was non-compliance which was aroused from the lacks of technical skills. From the viewpoint of the administrative factor, there were many non-compliance factors such as sailor education, shipping management, rescue, safety equipment. From the viewpoint of the passenger factor, there were passengers' threats which compelled the crews to leave the port under bad weather conditions. In conclusion, the principal non-compliances factors are passenger ship company did not follow safety rules such as shipping the permitted number of passengers, loading permitted tons of freight and fastening freights properly and recruiting required number of qualified crew. In order to reduce accidents, firstly we should find out the causes which play key roles in passenger ship companies' non-compliance to the government's safety regulations. Secondly we should tackle the causes.

  • PDF

복합가속열화시험을 통한 레일체결장치 폴리우레탄 탄성패드의 열화 경향 분석 (Evaluation of the Degradation Trend of the Polyurethane Resilient Pad in the Rail Fastening System by Multi-stress Accelerated Degradation Test)

  • 성덕룡;박광화
    • 한국철도학회논문집
    • /
    • 제16권6호
    • /
    • pp.466-472
    • /
    • 2013
  • 국내외적으로 도시철도 및 고속철도에서 콘크리트궤도 부설이 증가하고 있는 추세에 있다. 콘크리트궤도에서 필수적으로 사용되고 있는 레일체결장치의 탄성패드는 열차하중에 대한 충격을 완화시켜주는 중요한 역할을 담당하고 있다. 일반적으로 탄성패드의 강성변화를 평가하기 위해서는 단순피로시험[1]이 시행되고 있으나 이는 실제 철도환경조건과는 상이할 수 있다. 본 연구에서는 실제 철도현장에서 통과톤수를 받은 탄성패드에 대한 정적스프링계수를 측정하였다. 또한, 신품 탄성패드에 대해서 단순피로시험과 복합가속열화시험을 수행하였다. 사용한 탄성패드의 강성값은 사용시간과 반복횟수에 따른 시험결과값과 비교되었다. 시험결과의 비교를 통해 사용한 탄성패드의 정적스프링계수 변화경향이 반복하중과 열이 함께 고려된 복합가속열화시험결과와 동일한 경향을 보이는 것을 확인하였다. 또한, 복합가속열화와 관련된 T-NT식을 이용하여 탄성패드의 복합가속열화 모델을 도출하였으며, 약 2.62의 가속계수를 가지는 것을 확인하였다. 최종적으로 본 연구를 통해 폴리우레탄 탄성패드에 대한 복합가속열화 모델식을 제안하였다.

복합적층판(復合積層板)의 기계적(機械的) 체결부(締結部)에 관한 파손연구(破損硏究) (Damage Study on the Mechanical Fastening in Laminated Composites)

  • 송관형
    • 대한조선학회지
    • /
    • 제27권4호
    • /
    • pp.58-66
    • /
    • 1990
  • 기계적 체결방법은 분해 및 조립이 용이하고 본드접착에 의한 결합보다 신뢰도가 높은 장점이 있으나 원공으로 인한 높은 응력집중을 초래하고 국부적으로 집중된 응력 재분포의 메카니즘이 등방성 재료와는 달리 매우 복잡하고 실적 데이타 및 실험자료가 거의 없어, 복합재료구조물의 결합방법으로 많은 연구 검토를 필요로 하고 있다. 본 연구에서 사용한 시편은 $[0^{\circ}/45^{\circ}90^{\circ}/-45^{\circ}]_s$ 적층판으로 W(시편의 폭)/d(핀의 직경) 및 L(edge의 거리)/d를 변화시키면서 실험을 수행하여 기하학적 형상 및 적층강도 변화에 따른 파손강도 및 파손양상을 측정하여 그 결과를 이론해석 값과 비교하였다. 실험결과에 따라 최적기법으로 만든 새로운 변수 $\alpha,\;\beta,\;\gamma$를 재료상수로 취급하여 W/d및 L/d와 체결강도와의 관계식을 이용하면, 동일한 재료로 제작한 적층판의 체결강도를 8%이내의 오차로 예측 가능하다. 초음파 탐상법(Ultrasonic C-scanning)으로는 손상영역 탐색 및 손상영역 확대과정을 파악하고, X-ray로는 몇 단계 하중상태에서 손상부를 촬영하였고, SEM(Scanning electron microscopes)을 이용 원공주위 파손부의 균열의 진전상태를 미시적으로 관찰하였다. 파손강도 및 파손양상에 대한 실험결과와 FEM이론해석 모델에 예측한 값과의 차이는 $L/D=2{\sim}3$인 경우를 제외하고는 대부분 일치하였다.

  • PDF