사회과학 연구에 있어 인터넷 및 상업용 통신망을 이용한 전자설문 조사방법의 활용 (Toward a Social Sciences Methodology for Electronic Survey Research on the Internet or Personal Computer check)
-
- 경영과정보연구
- /
- 제3권
- /
- pp.287-316
- /
- 1999
Cyberspace permits us to more beyond traditional face-to-face, mail and telephone surveys, yet still to examine basic issues regarding the quality of data collection: sampling, questionnaire design, survey distribution, means of response, and database creation. This article address each of these issues by contrasting and comparing traditional survey methods(Paper-and-Pencil) with Internet or Personal Computer networks-mediated (Screen-and-Keyboard) survey methods also introduces researchers to this revolutionary and innovative tool and outlines a variety of practical methods for using the Internet or Personal Computer Networks. The revolution in telecommunications technology has fostered the rapid growth of the Internet all over the world. The Internet is a massive global network and comprising many national and international networks of interconnected computers. The Internet or Personal Computer Networks could be the comprehensive interactive tool that will facilitate the development of the skills. The Internet or Personal Computer Networks provides a virtual frontier to expand our access to information and to increase our knowledge and understanding of public opinion, political behavior, social trends and lifestyles through survey research. Comparable to other technological advancements, the Internet or Personal Computer Networks presents opportunities that will impact significantly on the process and quality of survey research now and in the twenty-first century. There are trade-offs between traditional and the Internet or Personal Computer Networks survey. The Internet or Personal Computer Networks is an important channel for obtaining information for target participants. The cost savings in time, efforts, and material were substantial. The use of the Internet or Personal Computer Networks survey tool will increase the quality of research environment. There are several limitations to the Internet or Personal Computer Network survey approach. It requires the researcher to be familiar with Internet navigation and E-mail, it is essential for this process. The use of Listserv and Newsgroup result in a biased sample of the population of corporate trainers. However, it is this group that participates in technology and is in the fore front of shaping the new organizations of interest, and therefore it consists of appropriate participants. If this survey method becomes popular and is too frequently used, potential respondents may become as annoyed with E-mail as the sometimes are with mail survey and junk mail. Being a member of the Listserv of Newsgroup may moderate that reaction. There is a need to determine efficient, effective ways for the researcher to strip identifiers from E-mail, so that respondents remain anonymous, while simultaneously blocking a respondent from responding to a particular survey instrument more than once. The optimum process would be on that is initiated by the researcher : simple, fast and inexpensive to administer and has credibility with respondents. This would protect the legitimacy of the sample and anonymity. Creating attractive Internet or Personal Computer Networks survey formats that build on the strengths of standardized structures but also capitalize on the dynamic and interactive capability of the medium. Without such innovations in survey design, it is difficult to imagine why potential survey respondents would use their time to answer questions. More must be done to create diverse and exciting ways of building an credibility between respondents and researchers on the Internet or Personal Computer Networks. We believe that the future of much exciting research is based in the Electronic survey research. The ability to communicate across distance, time, and national boundaries offers great possibilities for studying the ways in which technology and technological discourse are shaped. used, and disseminated ; the many recent doctoral dissertations that treat some aspect of electronic survey research testify to the increase focus on the Internet or Personal Computer Networks. Thus, scholars should begin a serious conversation about the methodological issues of conducting research In cyberspace. Of all the disciplines, Internet or Personal Computer Networks, emphasis on the relationship between technology and human communication, should take the lead in considering research in the cyberspace.
영양성과 경제성 및 내외국인에게 선호도가 높은 빈대떡에 대한 40대이상의 소비자들의 기호도와 물성으로 재료혼합비율을 반응표면 분석법으로 최적화하였다. 먼저 전통적 방법으로 조리된 빈대떡의 재료 혼합비율을 최적화 한 뒤, 오징어와 대두를 단백질 대체재료로 사용한 개량빈대떡의 흔합비율을 최적화하였으며, 또한 이들의 영양적인 품질을 평가하여 단백질 재료의 대체에 따른 개량빈대떡의 품질의 변화를 알아본 결과는 다음과 같다. 빈대떡 재료의 3가지 요인변수(전통빈대떡,
이 연구의 목적은 3 종의 포틀랜드 시멘트 (포틀랜드 시멘트, 백색 포틀랜드 시멘트, 초속경 시멘트)와 white MTA의 성분 및 세포독성을 비교하는 것이다. 성분비교를 위해서 X선 회절기 (XRD), X선 형광분석기 (XRF), 유도결합플라즈마 원자방출분광 분석기 (ICP-AES)를 사용하였으며, 세포독성비교를 위해서는 우무확산법 (agar diffusion test)을 사용하였다. 분석 결과, white MTA와 백색 포틀랜드 시멘트는 포틀랜드 시멘트나 초속경 시멘트에 비해 적은 양의 마그네슘 (mg), 철 (Fe), 아연 (Zn), 그리고 망간 (Mn)을 함유하고 있었다. 또한 초속경 시멘트는 다른 시멘트 및 white MTA에 비해 많은 산화 알루미늄 (
초음파 서모그라피는 초음파 진동 에너지 여기에 의한 물체의 표면 및 표면 아래에 존재하는 결함부위의 선택적 발열 특성을 적외선 열영상 카메라로 관측하는 것이다. 결함(균열, 박리, 공극 등) 이 존재하는 구조물에 초음파 진동 에너지를 입사시킬 경우 결함 부근에서의 국부적인 발열로 인해 건전 부위와의 급격한 온도차를 드러내는 핫 스폿이 관측된다. 초음파 진동 에너지 여기에 의한 핫 스폿 관측 및 분석을 통해 결함을 진단하는 것이 초음파 서모그라피를 이용한 비파괴 결함 진단 방법이다. 이를 이용한 결함 검출을 위해서는 초음파의 진동에너지를 검사 구조물에 효율적으로 전달하는 것이 중요하다 본 논문에서는 초음파 서모그라피를 이용한 실시간 결함검출에 대해 기술한다. 초음파 진동에너지의 입사 방향에 따른 결함 검출 특성을 평가하기 위해 진동에너지의 전달 방향을 시편과 수직 또는 수평방향으로 각각 입사시켰다. 각각의 입사 방향에 따른 초음파 트랜스듀서 양단에 인가되는 전압을 디지털 오실로스코우프로 계측 비교하였다. 결함 검출에 사용한 시편은 14 mm 두께의 SUS 균열(crack) 시편, PCB 기판(1.8 mm), 인코넬 600 판(1.0 mm) 및 CFRP 판(3.0 mm)의 4종류이다. 4종류의 시편에 대해 280ms 펄스폭의 초음파에너지를 수직 수평으로 각각 입사시켰다. 4종류 모두 수직방향으로 초음파 진동에너지를 입사시켰을 때 수평방향에 비해 전달 손실이 적었다. 복합재료인 PCB, CFRP 판은 수직방향으로 초음파 진동에너지를 입사시켰을 때 수평방향에 비해 결함 위치에서 열이 크게 발생하였으며 선택적 발열 현상도 3배 이상 지속되었다. 금속재료인 인코넬 600판과 SUS 시편은 수평방향이 수직방향보다 핫 스폿이 빨리 관측되었다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
本文为执行官提供了他们在处理日常业务问题和市场机会时如何阐述自己思考过程的培训. 本研究建立在Schank提出的教学基础上, 包括: (1)经验学习和最好的指导提供给学习者从诸如全球背景, 团队项目和专家经历等的互动的故事提炼知识和技能的机会. (2) 告诉不会导致学习, 因为在学习需要的行动训练环境中, 应强调积极使用故事, 案例和项目. 每个培训案例包括执行官解释自己的决策系统分析(DSA, 还需要执行官做DSA简报. 在训练时要求执行官写DSA简报. 在执行官学员写书面报告的说明中包括(1) DSA路线图的本质的细节(2) 警告和机会的陈述, 读者的行政地图及图内的DSA解释. 该报告的最大长度为500字, 其规则就是使行政人员培训课程行之有效. 引言之后是第二部分文献综述, 简要地总结了有关人们在对问题和机会的背景下的想法及文献. 第三部分通过使用对不同的贴牌生产客户定价相同的化学产品的培训练习来解释DSA的起源和过程, 第四部分展示一个炼油设备公司订价决策的培训练习. 第五部分提供一个商业客户办公家具采购的市场策略案例. 第六部分是结论和建议. 这些建议是关于使用培训课程和发展其他培训课程来磨练执行官制定决策的能力. 文章引导读者利用工具箱研究综合的报告, (DSA)路线图根据生态合理性理论将战略与环境相匹配. 这三个案例的研究让学习者在意愿层面征求建议来作出决策. Todd and Gigerenzer 提出人们使用简单启发式,因为他们在自然的决策环境中通过探索信息的结构使适应性行为有可能产生. "简单是一种美德, 而不是诅咒", 有限理性理论强调了西蒙的命题中心, "人类理性的行为仿佛一把剪刀, 其刀片则是任务环境的结构和执行者的计算能力". Gigerenzer的观点和西蒙的环境的危害相关, 也和本文中三个环境结构的案例相关. "环境这个词, 在这里, 并不是指总的物理和生理的环境, 而只是指被给予需要和目标的重要有机体 本文关注了结合任务环境的结构和使用适应的工具箱启发的报告. (DSA)路线图根据生态理性理论将战略与环境相匹配. 渴望适应理论是这一方针的核心. 渴望适应理论将决策制定作为一个没有把目标整合的多目标问题模拟成一个把所有决策选项进行完全的优先顺序化. 这三个案例研究让学习者在意愿层面征求建议来作出决策. 渴望适应用一系列的调整步骤的形式. 一个调整步骤通过仅一个目标变量的变化就可以改变在渴望网格上邻近点当前的渴望水平. 上调步骤是目标变量的提高, 下调步骤是目标变量的下降. 创造和使用渴望适应水平是对有限理性理论的整合. 文章通过提供学习者经验和实践环节增加了意愿采纳和有限合理性的理解和特点. 利用DSA图排列CTSs和撰写TOP可以清晰和深化Selten的观点 "清晰, 意愿采纳必须作为研究的解决方案整合到整个蓝图中". 这些有限理性的研究许可了在现实生活中为什么, 如何作决策的理论和在自然的环境中利用启发式的学习训练两方面的发展. 本文中的练习鼓励根据不同使用目的学习快速而简洁的启发式技巧和原则. 这也正回应了Schank的思想 "从本质上来看, 教育不是让学生们知道发生了什么, 而是让他们感受到所发生的事情. 这不容易做到. 在如今的学校教育是没有情感的, 这是一个很大的问题". 这三个案例和附加的练习问题遵守了Schank的观点. "这种教育过程最好是通过参与他们其中来实现, 也可以这样认为, 精神层面的积极讨论".
Study of Animation 3-Dimensional Motion Picture국내뿐만 아니라 전 세계의 수백만의 인구가 영상을 접하고 있다. 영상은 움직이는 형상을 시각화 하는 것에서 지식, 정보 전달의 매체로서 자리 매김 하였다. 과학의 발전은 온라인(Online)시대를 열어주었고 온라인 시대의 정보습득은 지속적으로 고속화 되어, 과량의 정보 속에서 선택을 해야 하는 관객들을 함께 가속화 시키고 있다. 선택적인 측면에서 시각적인 전달 방법은 급변하는 시대의 요구에 맞게 변화하게 된다. 다량의 정보 속에서 순간의 선택을 받기 위한 일한으로, 1차적인 요건은 시선을 집중시키는 것이며, 그에 상응하는 만족감을 선사하는 것이다. 영상의 초기는 실제로 자신이 보고 있는 상황을 그대로 옮기고자 하는 욕구에서 출발한 것이다. 정지화면에서 만족하지 못한 인간은 움직이는 화면(Film)을 개발하였고 양안의 시점의 차이와 광선의 자극 반응을 감안한 실제 인지하는 시점보다 더 입체감을 만들어내는 영상을 가늠 해내는 연구를 하게 된다. 이는 컬러 필름(Color Film)에서 입체영상 개발까지 놀라운 성과를 누리게 된다. 인간의 가시적인 면에 대한 욕망의 추구 즉, 극대화된 실재감(Reality) 있는 볼거리 추구는 영상이 포함되는 모든 분야에 지속적으로 요구되고 있다. 지금 수백만의 인구가 보편적으로 보고 있는 영상들은 평면적이다. 화면의 깊이 감(Depth)과 착시현상(Optical Illusion)은 효과적으로 현실감을 주며 정보를 전달한다. 하지만, 인간의 양안 시점차이로 인식하는 입체감은 평면속에서 만들어 내는 깊이 감으로는 현실감 있게 인식하는데 한계점이 존재한다. 이러한 한계를 만족시킬 입체 영상) 입체영상은 영화에서 시작되었으나, 20c후반기에 들어서면서 애니메이션 분야와 모바일, 광고 패널, 텔레비전등의 매체를 이용한 입체 영상의 개발로 인하여 특정 분야에 한정 시킬 수 없으므로 영상으로 칭한다. 입체 영상은 21c에 들어서면서 영상매체의 한 분야로 급부상하고 있다. 1900년 무렵부터 연구된 입체영화(3-Dimensional motion Picture)는 In여 년이 지난 지금 대중화를 눈앞에 두고 있다. 국내에서는 놀이 동산이나 박물관등에서 흔히 볼 수 있다. 하지만 앞으로는 HDW등의 대중화로 화질의 발전을 이룬 텔레비전 분야 등에서 실용화 될 전망이다. 국제적인 흐름과 함께 국내에서도 입체 영화에 대한 연구가 활성화 되어 영상산업의 한 주류로서 대두되고 있다. 이러한 상황에서 입체영상에 대한 이해와 콘텐츠(Contents)의 개발은 기술적인 진보에 발맞추어 준비되어야 한다. 본 논문은 이러한 기술적인 계보에 발맞춘 영상 콘텐츠 개발에 박차를 가하고자 앞으로의 발전분야에 대한 기술적인 면과 기법적인 면을 제시하여 기술만 앞서고 내용은 수입하는 수입국이기 보다는 미리 준비하여 비전문가나 타국의 기술에 선점 당하지 않는 분야로 성장할 수 있는 진보적인 영상 인들의 관심과 지속적인 연구를 독려하고자 한다.
소셜네트워크서비스(SNS)의 성장과 함께 다양한 형태의 SNS가 등장했다. 상호작용성, 정보 교류, 엔터테인먼트 등 다양한 이용 동기를 바탕으로 SNS 이용자 또한 빠르게 증가하는 추세이다. 그중 페이스북은 대표하는 SNS 채널로서 기업에서도 페이스북 페이지를 활용해 홍보 채널로 활용하기 시작했다. 이를 위해 운영 초기, 기업은 팬 수 확보에 나섰고 그 결과 최근 기업 페이스북 팬 수는 많게는 수백만에 이를 정도로 늘어났다. 기업의 목표는 팬 수 확보를 넘어 콘텐츠를 통해 고객에게 기업 브랜드 이미지를 재고하고, 나아가 소통하는 수단으로 활용하고 있다. 이를 평가하는 주요 수치가 바로 본 연구의 종속변수에 해당하는 페이스북의 '좋아요', '댓글', '공유', '클릭 수' 등이다. 해당 수치 달성을 위해 콘텐츠 제작에 대한 고민이 선행되어야 하는데, 본 연구에서는 콘텐츠 제작 고려 사항을 3가지로 나눠 독립변수를 구성하였다. 콘텐츠 소재, 콘텐츠 구조, 메시지 스타일 등이 페이스북의 이용자 행동에 미치는 영향을 회귀분석을 이용해 분석하였다. 종속변수의 경우, 콘텐츠상에 모든 이용자의 행동 '전체 클릭 수'로 설정하였다. 본 연구에서는 각 독립 변수를 기존 연구 문헌을 통해 정의하고, 종속변수에 미치는 영향을 분석하였는데, '전체 클릭 수'의 경우, '자사연관', '실생활 관여도', '격식 x 관여도' 등의 변수가 유의미한 영향을 갖는 것으로 나타났다. 연구 결과를 통해, 콘텐츠 목적에 따른 최적화된 콘텐츠 전략을 제시함으로써, 기업 페이스북 운영자와 콘텐츠 제작자의 운영, 제작 전략에 기여할 수 있을 것으로 보인다.
RFID(Radio Frequency Identification)시스템은 하나의 RFDI리더, 다수의 RFID태그 장치들로 이루어진 비접촉방식의 근거리 무선 인식 기술이다. RFID태그는 자체적인 연산 수행이 가능한 능동형 태그와 이에 비해 성능은 떨어지지만 저렴한 가격으로 물류 유통에 적합한 수동형 태그로 나눌 수 있다. 데이터 처리 장치는 리더와 연결되어 리더가 전송받은 정보를 처리한다. RFID 시스템은 무선주파수를 이용해 다수의 태그를 빠른 시간에 인식할 수 있다. RFID시스템은 유통, 물류, 운송, 물품관리, 출입 통제, 금융 등 다양한 분야에서 응용되고 있다. 하지만 RFID시스템을 더욱 확산시키기 위해서는 가격, 크기, 전력소모, 보안 등 해결할 문제가 많다. 그 문제들 중에서 본 논문에서는 다수의 수동형 태그를 인식할 때 발생하는 충돌 문제를 해결하기 위한 알고리즘을 제안한다. RFID 시스템에서 다수의 태그를 인식하기 위한 충돌 방지 기법에는 확률적인 방식과 결정적인 방식 그리고 이를 혼합한 하이브리드 방식이 있다. 본 논문에서는 우선 기존에 있던 확률적 방식의 충돌방지기법인 알로하 기반 프로토콜과 결정적 방식의 충돌방지기법인 트리 기반 프로토콜에 대해 소개한다. 알로하 기반 프로토콜은 시간을 슬롯 단위로 나누고 태그들이 각자 임의로 슬롯을 선택하여 자신의 ID를 전송하는 방식이다. 하지만 알로하 기반 프로토콜은 태그가 슬롯을 선택하는 것이 확률적이기 때문에 모든 태그를 인식하는 것을 보장하지 못한다. 반면, 트리 기반의 프로토콜은 리더의 전송 범위 내에 있는 모든 태그를 인식하는 것을 보장한다. 트리 기반의 프로토콜은 리더가 태그에게 질의 하면 태그가 리더에게 응답하는 방식으로 태그를 인식한다. 리더가 질의 할 때, 두 개 이상의 태그가 응답 한다면 충돌이라고 한다. 충돌이 발생하면 리더는 새로운 질의를 만들어 태그에게 전송한다. 즉, 충돌이 자주 발생하면 새로운 질의를 자주 생성해야하기 때문에 속도가 저하된다. 그렇기 때문에 다수의 태그를 빠르게 인식하기 위해서는 충돌을 줄일 수 있는 효율적인 알고리즘이 필요하다. 모든 RFID태그는 96비트의 EPC(Electronic Product Code)의 태그ID를 가진다. 이렇게 제작된 다수의 태그들은 회사 또는 제조업체에 따라 동일한 프리픽스를 가진 유사한 태그ID를 가지게 된다. 이 경우 쿼리 트리 프로토콜을 이용하여 다수의 태그를 인식 하는 경우 충돌이 자주 일어나게 된다. 그 결과 질의-응답 수는 증가하고 유휴 노드가 발생하여 식별 효율 및 속도에 큰 영향을 미치게 된다. 이 문제를 해결하기 위해 충돌 트리 프로토콜과 M-ary 쿼리 트리 프로토콜이 제안되었다. 하지만 충돌 트리 프로토콜은 쿼리 트리 프로토콜과 마찬가지로 한번에 1비트씩 밖에 인식을 못한다는 단점이 있다. 그리고 유사한 태그ID들이 다수 존재할 경우, M-ary 쿼리 트리 프로토콜을 이용해 인식 하면, 불필요한 질의-응답이 증가한다. 본 논문에서는 이러한 문제를 해결하고자 M-ary 쿼리 트리 프로토콜의 매핑 함수를 이용한 m-비트 인식, 맨체스터 코딩을 이용한 태그 ID의 충돌정보, M-ary 쿼리 트리의 깊이를 하나 감소시킬 수 있는 예측 기법을 이용하여 성능을 향상시킨 적응형 M-ary 쿼리트리 프로토콜을 제안한다. 본 논문에서는 기존의 트리기반의 프로토콜과 제안하는 기법을 동일한 조건으로 실험하여 비교 분석 하였다. 그 결과 제안하는 기법은 식별시간, 식별효율 등에서 다른 기법들보다 성능이 우수하다.