• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.4
• /
• pp.24-31
• /
• 2011

A high data rate Medical Implant Communications Service (MICS) transmitter for implantable medical devices (IMD) is proposed. An orthogonal frequency division multiplexing (OFDM)-based multicarrier scheme is used to overcome the data rate limitation caused by the narrow bandwidth of 300 kHz. The proposed transmitter utilizes multiple MICS channels simultaneously, supporting increased data rate. To satisfy the MICS regulation, various schemes are applied including optimized subcarrier allocation and inverse fast Fourier transform (IFFT) architecture, and additional sidelobe suppression technique. Simulation results show that the proposed transmitter can support a maximum data rate of 4.86 Mbps, which is more than ten times faster than the previous systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.80-87
• /
• 2007

In this paper, link-level performance of a OFDMA technique, which has been considered as a standard for 802.16, 802.20, 3G-LTE, WiMax, and WiBro, is evaluated for next-generation wireless communication systems. While many researches have focused on uncoded forward-link performances, this paper provides a coded performance of a reverse-link OFDMA system. Performance degradation due to time offset among reverse-link users and frequency offset during FFT process is investigated. Transmitter and receiver antenna diversity techniques are used to overcome performance degradation. Performance of a OFDMA system is compared with a CDMA system in terms of FER and throughput to emphasize the advantage of OFDMA system for a reverse-link. Finally, under given specification, Eb/No required to achieve the maximum throughput of a reverse-link is proposed considering various coded rates and antenna permutations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.1 s.307
• /
• pp.101-108
• /
• 2006

In this paper, an efficient butterfly structure for Radix-4 FFT algorithm using DA(Distributed Arithmetic) is proposed. It is shown that DA can be efficiently used in twiddle factor calculation of the Radix-4 FFT algorithm. The Verilog-HDL coding results for the proposed DA butterfly structure show $61.02\%$ cell area reduction comparison with those of the conventional multiplier butterfly structure. furthermore, the 64-point Radix-4 pipeline structure using the proposed butterfly and delay commutators is compared with other conventional structures. Implementation coding results show $46.1\%$ cell area reduction. Due to its efficient processing scheme, the proposed FFT structure can be widely used in large size of FFT like OFDM Modem.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1172-1180
• /
• 2007

OFDM system has very good high spectral efficiency and the robustness to the frequency-selective fading. Because of the high PAPR, OFDM signals can be distorted in nonlinear HPA(High Power Amplifier). So, to overcome the nonlinear distortion, it is very important to reduce the IMD value. With respect to the BER performance, IMD reduction method is better than the PAPR reduction method. However, IMD reduction method has much more system complexity because of the additional FFT processor in transmitter. In this paper, we study the OFDM communication system based on the IMD reduction method using SPW method. A new IMD reduction method is proposed to reduce the computational complexity. SPW method is to divide the input OFDM data into several sub-blocks and to multiply phase weighting values with each sub-blocks for the reduction of PAPR or IMD. Unlike the conventional method, the system size and computational complexity can be reduced.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.216-219
• /
• 2002

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) have been used use as a sensor. The advantages of PVDF are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. PVDF sensor can be directly embedded and attached to a structure. In this study, PVDF sensor was embedded in single glass fiber/epoxy composites whereas PZT sensor with AE was attached to single fiber composites (SFC). Piezoelectric sensor responds to interfacial damage of SFC. The signals measured by PVDF sensor were compared to PZT sensor. PZT sensor detected the signals of fiber fracture, matrix crack, interfacial debonding and even sensor delamination, whereas PVDF sensor only detected fiber fracture signals so far, because PZT sensor is much more sensitive than current PVDF sensor. Wave voltage of fiber fracture measured by PVDF sensor was lower than that of PZT sensor, but the results of fast Fourier transform (FFT) analysis were same. Wave velocity using two PZT sensors was also studied to know the internal and surface damage effect of epoxy specimens.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2011

With the development of next IT convergence technology and the construction of infrastructure for personalized services, the importance of services based on user's sensibility status and vital signal is being spotlighted. It is the most crucial factor for the strategy of sensibility engineering to investigate student's vital signal according to the sensibility. In this paper, we proposed the vital signal monitoring simulation system by the various visual stimulus. The proposed method obtained the student's vital signal by the various visual stimulus. And the power spectrum analysis using the fast fourier transform is evaluated the activity level between the sympathetic and the parasympathetic. The analyzed result is monitoring the sensibility by displaying the heath signal light. To evaluate the sensibility between the high school's students and the university's students, we conducted SD profile and paired T-tests so as to verify usefulness. This evaluation found that the difference of sensibility activity by positive and negative stimulus was statistically meaningful. Ultimately, this paper suggests empirical application to verify the adequacy and the validity.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.566-571
• /
• 2008

Frictional sounds of 8 vapor permeable water repellent fabrics by sound generator were recorded and analyzed through FFT fast Fourier transform analysis. The frictional Sounds were quantified by calculating level pressure of total sound(LPT), the level range(${\Delta}L$) and the frequency difference(${\Delta}f$). Mechanical properties were measured by KES-FB. LPT values of specimens finished wet coating were higher than those of other kinds of finishing. ${\Delta}L$ values of specimens laminated were highest. Absolute values of ${\Delta}f$ were high in the cire finished and laminated specimens. Values for bending rigidity, shear stiffness and energy required for the compression of coated specimens increased compared with the cire finished and laminated specimens. Laminated specimens had high values of frictional coefficient and low values of surface roughness. Relationship between frictional sounds and mechanical properties analysed by use of correlation coefficients and stepwise regression. LPT showed significant correlation with elongation, tensile energy, geometrical roughness, weight and thickness. ${\Delta}L$ was highly correlated with tensile linearity, frictional coefficient, and ${\Delta}f$ with tensile linearity, weight and thickness. LPT were revealed to be explained by elongation and weight. ${\Delta}L$were predicted by tensile linearity, and ${\Delta}f$ by tensile linearity and thickness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.332-338
• /
• 2010

Annually, electrical fires caused by arcing phenomena in power system rapidly increase as the use of more electric appliances, but there is no established method for the prevention of the accidents. With this background, this paper dealt with the experimental results on a series arc detection technique and a device for air conditioners. Series arcing phenomena that is generated in incomplete connection of air conditioners was simulated, and the frequency spectrum was analyzed. The Fast Fourier Transform (FFT) of the arc pulse showed that the dominant frequency components exist in ranges of 190 kHz~250 kHz and 900 kHz~1.6 MHz. An arc detection circuit with low cut off frequency of 170 kHz to attenuate 60 Hz by 170 dB and a signal discriminator were designed. Also, an algorithm which separate series arc signal from unwanted noises produced by switching operation, inverter, and surge was proposed. Application experiment was carried out on several types of air-conditioners by using the arc generator specified in UL1699, and the results showed the over 99 % accuracy.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.108-115
• /
• 1990

This paper describes the design and fabrication of a processing element that will be used as a component in the construction of a two dimensional systolic for FFT. The chip performs data shuffling and radix-2 decimation-in-time (DIT) butterfly arithmetic. It consists of a data routing unit, internal control logic and HBA unit which computes butterfly arithmetic. The 6.5K transistors processing element designed with standard cells has been fabricated with a 2u'm double metal CMOS process, and evaluated by wafer probing measurements. The measured characteristics show that a HBA can be computed in 0.5 usec with a 20MHz clok, and it is estimated that the FFT of length 1024 can be transformed in 11.2 usec.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.280-295
• /
• 2015

Block cipher ARIA was first proposed by some South Korean experts in 2003, and later, it was established as a Korean Standard block cipher algorithm by Korean Agency for Technology and Standards. In this paper, we focus on the security evaluation of ARIA block cipher against the recent zero-correlation linear cryptanalysis. In addition, Partial-sum technique and FFT (Fast Fourier Transform) technique are used to speed up the cryptanalysis, respectively. We first introduce some 4-round linear approximations of ARIA with zero-correlation, and then present some key-recovery attacks on 6/7-round ARIA-128/256 with the Partial-sum technique and FFT technique. The key-recovery attack with Partial-sum technique on 6-round ARIA-128 needs $2^{123.6}$ known plaintexts (KPs), $2^{121}$ encryptions and $2^{90.3}$ bytes memory, and the attack with FFT technique requires $2^{124.1}$ KPs, $2^{121.5}$ encryptions and $2^{90.3}$ bytes memory. Moreover, applying Partial-sum technique, we can attack 7-round ARIA-256 with $2^{124.6}$ KPs, $2^{203.5}$ encryptions and $2^{152}$ bytes memory and 7-round ARIA-256 employing FFT technique, requires $2^{124.7}$ KPs, $2^{209.5}$ encryptions and $2^{152}$ bytes memory. Our results are the first zero-correlation linear cryptanalysis results on ARIA.