• 산업기술연구
• /
• 제21권A호
• /
• pp.351-355
• /
• 2001

This research was carried out to find out the possibility of using Faraday's law in analyzing the electrocoagulation system. Bench-scale reactor equipped with aluminum electrode plates was operated using synthetic wastewater which received sodium chloride for conductivity adjustment. Phosphate was added to the wastewater to induce the precipitation with Al. The amount of aluminum dissolved from the electrodes could be predicted by Faraday's law with a difference less than 5%. This difference was greater at a higher electric current, probably due to the increased solution temperature. However, effect of pH on the dissolution of the aluminum was negligible. The result of this study suggested that the operating condition of electrocoagulation system could be developed using the Faraday's law when the pollutant concentration is given.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1611-1612
• /
• 2006

We are using the Faraday's electromagnetic law so as to improve our life in various industry fields. However, the side effect of the Faraday's law can be occurredin the sensors of the vehicle due to the high current flow such as Ignition. This effect is mainly caused by the shape of the wiring harness between sensor and high current load in the vehicle. To minimize the side effect by Faraday's law, three methods shall be considered in this paper (1) Pin definition of the sensor, (2) Pin definition of the high current load, (3) Wiring harness shape.

• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.99-104
• /
• 2000

The e.m.f. induced by a normal spot moving in a superconducting foil has been investigated by using the simulation and the experiment of a simple superconducting Power Supply. The induced e.m.f. has been derived theoretically from the magnetic field distribution within the spot. It is the sum of a DC component induced constantly by the Faraday's law during the spot's movement and a pulse component induced periodically by the flux conservation law at every electrical degrees 2$\pi$ radians. The DC component of the output voltage appears slightly nonlinear to the rotating speed, having values greater than the linear approximation values. The theoretical interpretation has been verified through experiment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.180-186
• /
• 2000

This paper presents a new winding method in the electronic descaling(ED) technology. The ED technology Produces an oscillating electric field via the Faraday's law to Provide necessary molecular agitation to dissolved mineral ions. But present method gives another agitation force to mineral ions, which is Lorentz's force. Experiments were peformed at various Renolds number. A series of tests was conducted, measuring pressure drop across test section and the overall heat transfer coefficient as a function of time. In order to accelerate the rate of fouling, artificial hard water of 1000ppm $CaCO_3$ was used throughout the tests. The results show that the new method accelerates collision of mineral ions and improvs efficiency of system.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.658-665
• /
• 2002

This paper presents a new winding method in electronic descaling (ED) technology. Conventional ED technology Produces an oscillating electric field via Faraday's law to provide the necessary molecular agitation to dissolve mineral ions. However, the proposed method produces an additional agitation force for mineral ions, called Lorentz's force. Experiments were performed using various Renolds numbers. A series of tests was conducted to measure the pressure drop across the test section and the overall heat transfer coefficient as a function of time. In order to accelerate the rate of fouling, artificial hard water, 1000ppm CaCO$_3$, was used throughout the tests. The results show that the new winding method accelerates the collision of the mineral ions, thereby improving the system efficiency. The present study can develope more effective fouling-removing equipment with change of estabishment method of coil.

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.447-453
• /
• 1999

In MHD power generation system, enthalpy of the working gas is convened to electric power directly through expansion in generator channel. It means that electric power can be generated without a moving mechanical linkage such as turbine blades. The principle of MHD generation is based on Faraday'law of induction that eletromotive force(u$\times$B) is generated when the working gas of velocity u flows a channel in which magnetic field of strength(B) exists. In this paper, helium gas seeded with cesium is used as working gas. There are two types of generator in MHD generation; linear type faraday and disk type hall generator. Rogowski coils having the bandwidth of the 100(Hz) ~ 20(kHz) were used for measuring current flowing MHD disk channel. Optimum load resistor value of the MHD generator studied was 2.5[$\Omega$]. Disk type hall generator's generation performance is the main target of this paper, which superiors to linear type Faraday generator in many points. Isentropic efficiency and enthalpy extraction rate of disk type shock tube driven hall generator is discussed here.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1981-1983
• /
• 1998

The principle of the MHD generation is based on Faraday's law of induction that a eletromotive force(u ${\times}$ B) is generated when the working gas of velocity u flows a channel in which magnetic field of strength(B) exists. In MHD power generation system, enthalpy of the working gas is converted to electric power directly through expansion in generator channel. It means that electric power can be generated without moving mechanical linkage such as turbine blades. There are two types in the MHD generator; linear type Faraday and disk type hall generator. Disk type hall generator is the main target of this paper. Isentropic efficiency and enthalpy extraction rate of disk type shock tube driven hall generator is discussed here.

• 한국지진공학회논문집
• /
• 제9권1호통권41호
• /
• pp.51-59
• /
• 2005

본 연구에서는 위의 어려움을 해결하기 위해, 스마트 수동제어 시스템을 제안하였다. 스마트 수동제어 시스템은 MR댐퍼와 EMI시스템으로 구성되며, EMI시스템은 영구자석과 솔레노이드 코일로 이루어진다. EMI시스템은 MR댐퍼의 왕복운동에너지를 전기에너지로 변환하므로, 스마트 수동제어 시스템은 외부 전원 없이 외부하중에 따라 댐퍼의 점성을 바꾸는 적응성을 갖는다. 따라서 간단하고 효율적인 장치로써, 대형토목구조물에 적용 가능하다. 이의 확인을 위해 예제를 통한 수치해석을 수행하였으며, 스마트 수동제어 시스템이 강진에 대해서는 기존의 반능동 제어 MR댐퍼 시스템 보다 우수한 성능을 보인다.

• 천문학회보
• /
• 제37권2호
• /
• pp.189.1-189.1
• /
• 2012

자장센서는 인공위성에 장착되어 궤도환경에서의 지자기장을 측정하는 센서로서 위성체의 자세결정과 자세제어 등에 활용된다. 일반적으로 자장센서는 원리와 응용범위에 따라 그 종류가 광범위하다. 응용되는 자기현상적으로 분류하면 Faraday 전자기 유도법칙을 이용한 방식, Hall Effect를 이용한 방식, 감지코일의 인덕턴스 변화와 와전류효과를 이용한 방식, 자속분포의 변화에 의한 유도기전력의 변화를 이용한 방식, 자기저항 변화효과를 이용한 방식 등이 있다. 그 중에서도 Faraday's Law를 이용하는 Fluxgate 자장센서가 구조가 비교적 간단하고 경량이며, 높은 신뢰성과 안정성을 가진다. 실제 위성을 발사하기전 지상에서는 위성체를 조립하고 전자파, 진동, 열진공 등과 같은 다양한 환경시험을 수행하는데, 이때 각 환경시험 수행을 전후로 자장센서의 극성시험, 응답시험 등과 같은 기능시험을 수행한다. 본 논문은 다양한 환경시험을 통해 수행한 Fluxgate 자장센서 기능시험 데이터에 대한 추이를 분석하여 위성 발사전 지상에서의 자장센서의 상태와 건전성을 진단하는 방법에 대하여 소개한다.

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.201-209
• /
• 1996

최근 여러 지역에서 혹독한 환경에 노출되는 대형구조물들의 건설이 증가하고 있다. 철근부식은 콘크리트 구조물의 내구성 및 내구연한에 큰 영향을 미칠 수 있다. 따라서 철근부식저항성을 증진시키기 위하여 내구성이 우수한 콘크리트의 개발이 필요하며 이러한 고내구성콘크리트의 부식저항성은 철근부식촉진실험으로 나타낼 수 있다. 따라서 본 논문의 목적은 철근의 부식량을 합리적이고 정확하게 측정하기 위한 새로운 기법을 고안하는데 있다. 본 논문에서 제시된 방법은 Faraday's Law 에 기초하고 있으며 철근부식은 전위차 부식실험방법으로 촉진시켰다. 본 연구에서 제시된 기법은 촉진부식시간에 따라 철근의 부식량을 결정할 수 있다. 따라서 고내구성 콘크리트를 개발하기 위한 플라이애쉬와 실리카 흄 등 혼화재가 미치는 철근부식 저항성연구를 정량적으로 수행할 수 있는 기법이 제시되었으며 이 방법은 앞으로 철근콘크리트 구조물의 부식저항성 예측에 효율적으로 활용될 수 있다.