• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.132-133
• /
• 2013

External Insulation Method is to place the insulation on the outside of concrete. External Insulation Method is better than Internal Insulation Method to the protection of structure. However, The phenomenon that External Insulation falling from the structure occurs frequently. Apply method of External Insulation is divided Wet Construction, Dry Construction and Wet & Dry Construction. The purpose of this study is to test Bonding Strength of External Insuation. Furthermore, on the basis of this study, External Insulation Method determines the effective development will be made.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.77-83
• /
• 2019

MgO-C refractories are used in basic furnaces and steel ladles due to their many desirable properties, such as excellent thermal shock resistance via low thermal expansion, and high thermal conductivity. However, the mechanical and thermal properties of the refractory continuously deteriorate by spalling phenomena and pore generation due to the oxidation of graphite, used as a carbon source, indicating that the characteristics and performance of MgO-C refractories need to be improved by using a new material or composition. In this study, the use of a Hertzian indentation test as a method for determining the damage and fracture behavior of an MgO-C refractory is described. The results highlight that Hertzain indentation tests can be one of the important evaluation tools for quasi-plastic damage accumulation of MgO-C refractories during falling process of scrap metal.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.95-100
• /
• 2011

The test was done on cars travelling at speeds of 20km/h, 60km/h and 100km/h, the performance testing mode for chassis dynamometer. In this test, the secondary waveform were measured, including those using faulty MAP sensors, oxygen sensors and spark plugs. The results from these measurements and their analysis of secondary waveform can be summarized as follows: 1) The secondary waveform measured from the faulty oxygen sensor showed a lot of noise around peak voltage and in the rising and falling sections during spark line which means that the air fuel mixture was non-homogeneous. 2) The secondary waveform from the faulty MAP sensor showed the worst shape compared to other sensors, including variation of spark line, state of air-fuel mixture and velocity of flame front. 3) The spark line time of secondary waveform using a faulty spark plug displayed the shortest and smallest energy spark line, which means that a misfire occurred.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.95-98
• /
• 2012

There are many high-rise apartment building construction in Korea. There was an accident to pass through worker head by rebar dropped from height place. Therefore, low cost-high effectiveness method to prevent this type of accident should be revised and applied into the construction site. This study is to find out which method could be effectively applied to a site with low cost. Practical field test at 4th floor, 10th floor of apartment building site using re-bar diameter D10, D13, D16, D19, D22 with a length of 1 m, 1.5 m, 2 m, 2.5 m, 3 m which are common by used in a site. The test has also been done with a cover of styrofoam thickness 4.5 cm and thickness 9cm on field drop preventing net. One sheet of styrofoam thickness 45 mm has approximately two times stronger than only prevention net, It is found. Also, Two sheets have approximately two times stronger than one sheet of it.

• 한국전문물리치료학회지
• /
• 제17권4호
• /
• pp.55-60
• /
• 2010

Clinical measures that Quantify falling risk factors are needed for the accurate evaluation of patients and to plan an intervention strategy. The purpose of this study was to examine the test-retest and interrater reliability of the dynamic gait index (DGI) for persons with Parkinson's disease (PD). A total of 22 idiopathic PD patients were recruited from rehabilitation hospital, Korea in this study. The DGI was assessed in two sessions that were, three days apart. We also measured Berg balance test (BBT) and geriatric depression scale (GDS) for concurrent validity with DGI. Intrarater and interrater reliability (.96 and .98 respectively) for DGI were high. indicating good agreement. The DGI was showed a good positive correlation with the BBS (r=.852). but not GDS (r=-.462). Intrarater and interrater reliability of DGI were high in people with PD. The DGI could be a reliable measure to evaluate functional postural control during gait activities in the PD population, and the ability of DGI to detect real change is acceptable in research and clinical settings.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1455-1463
• /
• 1990

In this study the feasibility of a dynamic gait for a given quadruped walking robot is investigated through a computer simulation of the walking with certain drivings of the actuators. Two planar inverted pendulums are used to represent the dynamic model of the leg of the walking robot. It's gait motion is assumed to be periodic and symmetric between left and right sides only with half cycle delay. The dynamics of the walking robot is simplified by introducing two virtual legs to produce two planar inverted pendulums in two orthogonal planes and on the basis that certain legs in pair act as one. The feasibility of the dynamic gait motion is established from the following two necessary conditions:(1) The position and velocity of a foot must satisfy the stroke and velocity requirements.(2) The gait motion should be periodic without falling down. The gait feasibility test was applied to a walking robot design showing the specific acceptable speed range of the robot in trot. Also it showed that the higher body height may produce the faster trot gait.

• 가정과삶의질연구
• /
• 제28권1호
• /
• pp.1-11
• /
• 2010

The purpose of this study is to compare the cognition of SIDS as the first step for decreasing the SIDS death rate for the infant and for activity of infant-care in Korea. Participants were 409 child care center directors and 146 parents from 500 child care center directors and 200 parents who using child care center facilities for their children in Seoul. For analysis of research questions, frequencies, Cronbach $\alpha$, t-test,One-way ANOVA, Scheffee test were used with SPSSWIN 15.0. Through this study, we find the child care center directors have good cognition for it, but their effort for SIDS prevention is limited, because they don't have any official prevention education from authorized training center. Even though the parents have a low awareness for SIDS prevention than child care center directors, but they have high score in endeavor for SIDS precaution. Both child care center directors and parents want to receive systematic information from government side. Our infant should have a opportunity to grow up health and stability from reducing the risk of SIDS. In western countries such as U.S.A., U.K. and Japan have studied to decrease the SIDS death rate from thirty years ago, they have already government and social organization for preventing the SIDS. Nowadays, as you know well, our country birth-rate is falling by 1.08, therefore, it is important to decrease the infant death rate for keeping with our population. Also, it is relevant to the child-welfare and the child-safety and more better the child-care.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.5-8
• /
• 2006

High strength concrete has been increasingly used in high rue building and it is very obvious re consider fire resistance performance of that. Unlike the normal strength concrete, high strength concrete in sudden elevating temperature at fire is susceptible to spalling with severe explosion and surface split, due to high density of concrete. In order to endure the spalling, inner space temperature of concrete should be control less than certain point. Therefore this study investigated the influence of covering materials on high strength concrete finishing spray-on materials of fiber composite spray mortar(FCSM). Both polypropylene(PP) and polyvinyl alcohol(PVA) fiber were used in this test. Test showed that concrete, covering 18mm mortar containing PVA fiber and confining metal lath 2.3mm thickness, decreased 50% of main bar ambient temperature. compared with control concrete. In addition, concrete covering 18mm mortar without fiber caused falling of covering materials and then it was exposed in elevating temperature. As a result, spatting of the concrete occurred same as control concrete. However, concrete covering spray-on mortar containing PVA or PP fiber resisted spatting occurrence.

• 근관절건강학회지
• /
• 제23권1호
• /
• pp.28-38
• /
• 2016

Purpose: The purpose of this study was to investigate post-burn itching relevant characteristics in the rehabilitation phase. Methods: Ninety four burn patients who were hospitalized in the rehabilitation phase participated in the study. Self-reported Leuven itch scale-Korean was used to evaluate itching related characteristics. Data were analyzed with descriptive analysis, $x^2$ test, and Kruskal-Wallis test. Results: All subjects except two had the itching. Itching frequency revealed that 68.1% of subjects experienced itching one or more episodes a day or always, and 18.7% had episode durations lasting more than 2 hours per incidence. Mean severity and distress of itching was $5.3{\pm}2.4$ and $5.2{\pm}2.5$, respectively. Itching sensation dimension of tickling was 56.4%. More than 25% of subjects "often" or "always" affected reduced quality of life, loss of concentration, bad mood, and difficulty in falling asleep. Satisfaction with itching treatment was intermediate level. Conclusion: Post-burn itching in the rehabilitation phase was a significant problem despite pruritus treatment. Based on the finding of this study, development of comprehensive and tailored nursing intervention programs for itching could be suggested.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1152-1158
• /
• 2007

현재 미국, 유럽, 일본 등을 중심으로 기존의 다짐평가시험보다 빠르고 간편하게 다짐도를 평가할 수 있는 장비들이 개발되어 사용되고 있지만 국내에서는 아직 이러한 다짐평가장비의 사용이 보편화 되어 있지 않다. 이 연구에서는 모형지반에서 진동핸드로울러를 이용하여 다짐을 실시하고 기존 다짐평가 방법인 들밀도시험결과와 새로운 다짐평가장비인 지오게이지(geogauge), 간이지지력측정기(CASPFOL), 동평판재하시험기(LFWD), 동적콘관입시험기(DCP) 결과를 비교 분석하고 시험장비간 상관성 평가를 수행 하였다. 그 결과 상관계수는 $70{\sim}95%$로 대부분 높은 상관성을 보이는 것으로 나타났다.