• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.106-117
• /
• 2012

Indirected heating dryer is used as one of the food waste treatment technologies for the production of the drier material supplied to the recycling facilities or end user. This study investigated the effect on drying efficiency for the operation of rotating screw with the circulating and falling movements on indirected drying process of food waste. The screw operating condition showed higher drying efficiency despite of the shorter drying time compared to the screw non-operating condition. The moisture content decreased to 14.4% from the initial moisture content of 77.1% after drying 5 hours in the screw operating condition. On the other hand, in the screw non-operating condition, the moisture content decreased slightly to 35.6% after drying 16 hours. During the drying process, variations of the water evaporation rate and particle size showed different tendencies depending on the moisture content regions. In the higher moisture content region above the glue zone(moisture content of about 50%-60%), the particle size increased and the water evaporation rate reached the highest peak. In the range of glue zone, the particle size maximized while the water evaporation rate decreased sharply. In the lower moisture content region below the glue zone, the water evaporation rate and particle size both decreased at the same time. The particle size distribution was widely ranged from 25.0mm to 0.25mm in the screw operating condition while it was narrowly distributed in the screw non-operating condition from 25.0mm to 3.56mm, especially highly concentrated to 25.0mm. It was regarded that the hygroscopic, capillary and gravitational water evaporated more easily from the intra-particle during the circulating and falling movement caused by the rotating of the screw and the difference of the cohesional force of water within intra-particle depending on the moisture content regions. Comparing the effect of the circulating and falling movement on drying efficiency, the water evaporation rates per time and per weight of dry solid in the screw operating condition were higher about 364% and 356%, respectively, than those of the screw non-operating condition.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.48-57
• /
• 1982

In order to improve the quality of traditionally sun-dried red peppers and to increase the efficiency of drying performance, three types of solar dryers were designed and built, and drying performance of the solar dryers was compared to traditional sun drying. Results obtained from the experiment are summarized as fallows: 1. The air temperature and relative humidity profiles over a 8-hour period measured at the specified locations in the drying chamber of solar dryers appeared to have large variation in each dryer. The rate of drying increased with the temperature rise in the drying chamber of the solar dryer. 2. In general. drying with solar dryers proceeded faster than traditional sun drying. With A'-type of solar dryer developed in the second experiment it was possible to dry red peppers in seven days from an initial moisture content of 80% to safe storage conditions. The drying time with the A'-type solar drier was 50% shorter compared to traditional sun drying. 3. Red peppers appeared to have an increasing or constant-rate drying period until the weight of the product was reduced to about one half the initial weight, followed by a falling-rate drying period. When the dried red peppers were exposed to the atmospere during the night, the moisture content increased as much as 6%, which is much higher than for the grains. 4. It was suggested from the experiment that either a heat storage system or a supplemental heating system in the solar dryer was desirable for more efficient drying operation. 5. It was shown that the solar dryer developed in this study may be suitable for drying other vegetables and fishes, and also offered additional advantages of saving in drying time, maintaining sanitation and minimizing contamination by dust, insects and unfavorable weather condition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.37-43
• /
• 1982

Constant rate period, falling rate period and diffusion coefficient using filefish fillet as sample during drying in hot air drier were determined under controlled conditions of temperature, humidity and air velocity. Drying rate curve consisted of a short period of constant rate and two stages of falling rate period. When 1 to 3m/see of air velocities were applied, diffusion coefficients were in the range of 1.9130 to $2.6187\;{\times}\;10^{-6}\;\textrm{cm}^2/sec$ at $50^{\circ}C$. 2.4806 to $3.5342\;{\times}\;10^{-6}\;\textrm{cm}^2/sec$ at $60^{\circ}C$ and 4.3405 to $5.3042\;{\times}\;10^{-6}\;\textrm{cm}^2/sec$ at $70^{\circ}C$, respectively. Available lysine content was decreased by 15%. 16% and 20% in the fillet dried at $50^{\circ}C$, $60^{\circ}C$ and $70^{\circ}C$, respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.137-145
• /
• 2005

The effects of air temperature and sample thickness on drying kinetics of strawberry leather were investigated. The mathematical modeling was performed by using three thin-layer dying models. The independent variables were sample thickness (S1 = 1.8, S2 = 2.7, and S3 = 3.6mm) and air temperature (50, 60, 70, and 80$^{\circ}$C). All samples took place in the falling rate period. The values of effective moisture diffusivity, D$_{eff}$ varied from 2.40 to 12.1$^{\times}$10-9m$^{2}$/s depending on drying conditions. The values of activation energy, E$_{a}$ were 35.57, 33.14, and 30.46 KJ/mol for each sample of S1, S2, and S3. The two-term exponential model was found to satisfactorily describe the thin-layer drying kinetics of strawberry leather.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.236-241
• /
• 2009

After analyzing the characteristics of the cooling dryer, the mixed cooling dryer was developed by adding the desiccant dryer which supplement the cooling dryer's demerits. Also, the hybrid desiccant cooling dryer was developed to use effectively the exhaust heat energy of the cooling dryer. It could make a more that 20 percent reduction in energy compared with the mixed desiccant cooling dryer. It has become essential to supply this equipment and search the suitable drying product.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.1
• /
• pp.11-15
• /
• 1988

Square slices of sea tangle was dried in constant condition of thickness (1.54mm), air temperature $(50^{\circ}C)$, relative humidity $(30\%)$ and air velocity (0.4m/s). The shrunk surface area and the shrinking rate were investigated. The results obtained are summarized as follows : 1) Comparing the shrinking of transverse section with that of vertical section, the transverse section was proceeded more double shrinkage than vertical section. 2) The shrunk surface area curve showed nearly a linear shrinkage up to 90min of drying time. 3) The shrinking rate was rapidly increased in first falling rate period, and was largest in the early period of second falling rate period.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.200-205
• /
• 1987

A microcomputer-based on-line monitoring and controlling system was built and applied to the dehycration operation. Drying conditions-drying temperatures and air velocities-were successfully controlled by the control deveices incorporated on/off realy and thyristor, and with the high language program. Drying variables-temperature in drier and weight loss of radish slice were accurately measured and acquisited. The computer-based drying system effectively saved the man power required to measure and record data during the drying period and also made possible to conduct the process undisturbed for long period. The drying rate curves of radish at various drying conditions were obtained from automatic data analyzing program. And also the computer programmed control made possible to investigate the effect of air velocity change during the drying period. The dynamic change of air velocity of from one to another level could be performed and affected markedly the drying rate at first stages of drying, but no significant effect were found in falling rate period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.503-508
• /
• 1991

The salted and dried mullet(Mugil Japonicus) roe had about 42% of protein and 41% of lipid content as major compoments. Therefore the lipid oxidation and the deterioration of protein occurred during drying and storage periods. In order to keep the good quality of the dried roe, acid, peroxide, thiobarbituric acid value and the contitutional amino acid were studied in the different drying air velocities at the conditions of 60% R.H. and $20^{\circ}C$ of drying air temperature. The optimum air velocity showed 2m/sec, which was excellently superior to the lipid and protein quality than those of other air velocities on the dried mullet roe. The drying period shortened from 20 days in the conventional processing method to 7 days in the modified processing method that had 2m/sec of drying air velocity. The drying rate curve had only a falling-rate drying period and not to have a constant-rate drying period.

• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.398-403
• /
• 1978

Squid was dried on the fluidized-bed in the drying chamber filled with solid particles which were also fluidized with hot-air, and effects of the fluidized particles, the squid's height from the grid and the drying temperature on the drying rate and quality of the squid were observed The mechanism of moisture transfer during the falling rate period was also derived. 1. Sodium chloride was found to be the most suitable fluidized particles and at an air velocity of 3.8 m/sec, optimal fluidization state of this particle was obtained. 2. Uniform profiles of temperature were obtained at a point 4 cm above the grid and the location of squid on the fluidized-bed observed to be suitable when it was 4 cm above the grid. 3. At an air velocity of 3.8 m/sec and when the location height of the squid on the fluidized-bed was 4 cm, the optimal temperature for the drying time which is required to reduce the moisture from 80.8% to 18-22% was 8.5 hours. 4. Drying data followed the empirical equation of unsteady state diffusion $log\;(\frac{W-We}{Wc-We})=-m{\theta}$ in the region of the moisture contents measured and the drying constant (m) was calculated as $0.32hr^{-1}$. These results suggested that the migration of moisture during the falling rate period is due to a diffusion type mechanism. 5. The short constant rate period was observed in the early stage and thereafter, drying was controlled by the falling rate period, and the time ratio of the fluidized bed drying to the through circulation drying for reducing the squid's moisture contents to the same level at the same drying temperature was 1 : 1.4 6. Comparisons of fluidized-bed dried squid and sun dried squid in sale showed that there was no significant change in qualities such as external appearance and hydrogen ion concentration of dry product.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.111-118
• /
• 1982

A closed solar collector drying system by water exchange was evaluated for the drying of ginseng. The thermal efficiency of solar collector, drying efficiency, drying characteristics and product quality were investigated. The drying period was reduced by one-thirds in comparison with typical method. The maximum and minimum thermal efficiency of the solar collector during drying period were 14.42%, and 4.73%, respectively. The drying efficiency of solar collector and control system showed 28.34%, and 13.45%, respectively; net drying efficiency being 14.8%. The drying rate curve of red ginseng showed only falling rate period, and its equation was $Y=50.7023t.^{-0.4138}$ The brown color intensity of red ginseng was higher in solar collector drying system than in typical method, and reductivity by diphenyl picryl hydrazil solution in red ginseng extract showed similar result to brown color intensity.