• 대한인간공학회지
• /
• 제29권3호
• /
• pp.347-356
• /
• 2010

The purpose of this study is to analyze the spine stability by comparing muscle activation in various scaffold working conditions. The independent working conditions were designed by two levels of working height, existence and absence of safety handrail, and the two levels of expertise. The corresponding activities of the agonist and antagonist muscles of spine were simultaneously recorded by using EMG. As results, novice worker showed increased muscle activity while doing the task on the 2nd floor, absence of handrail. And expert showed the increase of co-contraction while working on the 2nd floor without handrail. Such co-contraction was found to increase the spine stability when the working condition become risky. On the other hand, the co-contraction was prolonged, the spine muscle fatique and disc pressure could be increased, which would increase the risk of musculo-skeletal disorder. The results of co-contraction in this study indicates that the motor control system responds to maintain the stability of the spine particularly when workers cognitively recognize the danger of falling or imbalance. This study also quantitatively accounted for the biomechanical cause of LBP among workers who has to prevent themselves from falling. Therefore, if can be said that safe environment preventing falling can also prevent workers from MSDs as well. Such knowledge can be applied to design ergonomic workplace environment as well as movable scaffold.

• 한국지반환경공학회 논문집
• /
• 제12권3호
• /
• pp.47-54
• /
• 2011

절토비탈면에서 발생되는 낙석에 대한 안정성을 확보하기 위해 설치되는 낙석방지 울타리는 기본적으로 12.5m 높이에서 400kg인 암괴가 낙하될 때 발생되는 50kJ의 충격에너지를 가정하여 설계되고 있다. 그러나 암괴의 크기가 커지거나 높이가 높은 곳에서 낙하하는 경우에는 기존의 낙석방지울타리로는 안정성 확보가 어려운 실정이다. 본 논문은 낙석해석프로그램을 이용하여 암괴중량에 따른 비탈면 높이, 울타리와의 이격거리, 경사각 등의 변화를 주어 낙석에 대한 안정성 분석을 실시하여 보았다. 해석결과 기존의 2.5m 높이의 낙석방지울타리는 설계하중 조건인 400kg 암괴가 낙석 될 때, 비탈면 높이가 20m 이내의 일부를 제외하고 대부분 낙석에 대해 안정성이 확보될 수 있으나, 20m 이상인 경우 낙석의 튀는 높이가 낙석방지울타리를 넘는 경우가 빈번하고 낙석의 충격에너지도 설계충격에너지 이상인 경우가 발생되는 결과를 얻을 수 있었다. 그러므로 낙석방지울타리의 설계 시 표준도에 준하여 설계하는 방식보다 지반조건에 따른 낙석의 안정성 검토를 실시한 후에 낙석 도약높이 및 충격에너지를 평가하여 낙석방지울타리를 설계하는 것이 적절할 것으로 판단된다.

• 동아시아식생활학회지
• /
• 제25권3호
• /
• pp.440-450
• /
• 2015

Effects of Doenjang and Chunggukjang on rheological properties of bread flour were investigated based on falling number, RVA, farinogram, colorimeter, rheofermentometer and SEM. The falling number of bread flour was highest among all samples, and mixed flours containing Chunggukjang showed lower falling number than Doenjang. RVA showed that initial pasting temperatures of the control mixed flour of Doenjang and Chunggukjang increased sequentially, whereas peak viscosities were reversed and final viscosities showed similar results. In the farinogram, consistencies and water absorptions decreased with increasing quantity of Doenjang and Chunggukjang. Developments, stabilities, time to breakdowns and farinogram quality numbers of the mixed flour containing Doenjang were higher than those of Chunggukjang and greater addition decreased values. In the rheofermentometer test, height of maximum dough development of mixed flours containing Chunggukjang were lower than that of flours containing Doenjang. Total volumes, retention volumes and retention coefficients of mixed flours containing Doenjang and Chunggukjang were lower compared to the control. For features, SEM showed that mixed flour containing Chunggukjang showed a faded boundary compared to flour containing Doenjang. All of results showed that the various activities of Chunggukjang were more potent than those of Doenjang.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.8-15
• /
• 2010

The flow around a two-dimensional, rectangular cylinder that is freely falling in a channel was simulated using the immersed boundary method with direct forcing to determine the interactions between the fluid and the structure. The results of the present study were in good agreement with previous experimental results. Regardless of the H/L ratio (where H and L are the height and width of the rectangular cylinder, respectively), the flow structures had essentially the same pattern as the two symmetrical circulations that form about the horizontal center of the cylinder, with those centers located at each lateral position near the wake. When the cylinder approaches very close to the bottom, a jet-like flow appeared between the bottom of the rectangular cylinder and the channel. When the jet-like flow goes through the channel, surrounding fluids are sucked into this jet, forming the secondary vortices.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.151-159
• /
• 2012

The characteristics of an impact load and pressure were experimentally investigated. Drop tests were carried out using a modified Wigley with CB = 0.56. The vertical force, pressures, and vertical accelerations were measured. A 6-component load cell was used to measure the forces, piezo-electric sensors were used to capture the impact pressure, and strain-gauge type accelerometers were used to measure the vertical accelerations. A 50-kHz sampling rate was applied to capture the peak values. The repeatability of the measured data was confirmed and the basic characteristics of the impact load and pressure such as the linearity to the falling height were observed for all of the measurements. A simple formula was derived to extract the physical impact load from the measured force based on a simple mass-sensor-mass diagram, which was validated by comparing impact forces with existing data using the mathematical model of Faltinsen and Chezhian (2005). The effects of the elasticity of the model and change in acceleration during the water entry were investigated. It is interesting to observe that the impact loads occurred and reached peak values at the same time duration after water entry for all drop heights.

• 물과 미래
• /
• 제28권4호
• /
• pp.147-154
• /
• 1995

본 연구에서는 특별한 에너지 감세를 위한 수공구조물이 설치되지 않은 중 소규모 단락부 하류부에서 자유낙하하는 수맥으로 인하여 발생되는 비점착성 하상재료의 세굴특성을 수리모형실험을 통하여 분석하였다. 단락수맥 하류부에서의 세굴특성을 분석하기 위하여 먼저 직사각형 단락수맥의 흐름특성을 조사하였으며, 하상재료, 유량, 하류수심을 변화시키면서 세굴공의 직하류부에 생성되는 둔덕(mound)의 유무로 인한 세굴특성을 비교 분석하였다. 평형세굴심 뿐만 아니라 둔덕의 높이도 밀도 후르드수의 함수로 표시되며, 밀도 후르드수는 다른 무차원량 보다 평형세굴심과 비교적 깊은 관계가 있는 것을 확인하였다. 단락부 하류부 하상 보호공의 설계시 둔덕의 영향을 고려해야 한다는 결론을 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.265-272
• /
• 1994

The relative density seems to be important as a factor of controlling the physical properties in the case of cohesionless soil ground as sand. Therefore, the study is more important about the method for reappearing the same relative density when the specimen of shearing test is to be produced or the model test of ground is to be made. In this study, the apparatus making use of the multiple sieving pluviation method - one of the reappearance of relative density - could be made. Using this apparatus, tests were practiced varying the factors such as the size of sieve mesh and the number of sieve, the amount of falling discharge, the falling height etc. about the standard sand in Jumunjin and Hadong sand. When laboratory test is performed by the cohensionless soil , it presents the method for reappearing of the relative density in field.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.62-67
• /
• 2002

While upwelling regions account for only 0.1% of the ocean surface, they yield over 40% of world's fish catch. Thus it is vary important making upwelling region by various methods. This study was performed to find out basic hydrodynamic characteristics (function, stability..,) of artificial upwelling structures. The hydrodynamic characteristics of artificial upwelling structures can be summarized as follows: 1) The falling velocity of blocks was effected size($l_B$) of blocks than incident current velocity( $V_0$). 2) The falling horizontal distance was reduced as induce of stratification parameters and block' size. 3) Generation of artificial upwelling current was effected by size of structures and incident current. When stratification parameters was about 3.0 and relative height(hs/h) of structures was about $0.125{\sim}0.15$, stable artificial upwelling current was generated in the back-side of structures.

• 한국안전학회지
• /
• 제12권2호
• /
• pp.146-152
• /
• 1997

The number of accidents due to slipping, falling and awkward postures are estimated to account for over forty percent of annual industrial accidents in Korea. To prevent such accidents, stability-maintaining capabilities of workers should be understood before any other approach. This research was aimed to analyze capabilities of the workers with the help of yours male students maintaining standing postures on a tiltable stability platform. The experimental result showed that tilting direction, height of pivoting point, and permissible degree of swaying made significant effects on stability-maintaining duration. Besides, humans are more capable of maintaining their standing body postures on a platform tiltable fore and aft rather than or one tiltable sideways. The number of falling or tripping supported this phenomenon. A mechanical and physical discussion on the stability was added.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.21-27
• /
• 2007

The multiplication equipment of marine products with artificial upwelling structures could be useful in the fishing grounds near coastal areas. Artificial upwelling structures could move the inorganic nutrients from the bottom to the surface. Artificial upwelling structures have been used to improve the productivity of fishing grounds. Until now, research on artificial upwelling structures has been related to the distribution of the upwelling region, upwelling structures, and the marine environment. However, little work on the optimum design of the rubber-mound artificial upwelling structures has been done to increase the efficiency of drawing up the inorganic nutrients. This study investigated the optimum cross-section of rubber-mound artificial upwelling structures by means of hydraulic experiments. The hydraulic experiments include the falling test of rubber. Based on the results of the falling test, the relationship between the length of the rubber mound and water velocity, and the relationship between the shape of the rubber and the stratification parameter were established. In addition, the effect of the void ratio of various artificial structures on the stratification parameter was studied. From the experiment, it was found that upwelling could be enhanced when the ratio of structure height to water depth was 0.3 and stratification parameter was 3.0. The upwelling was not improved when the void ratio exceeded 0.43. The optimum size of rubber mounds was determined when the incident velocity was influenced by the mean horizontal length rather than size of block.