• 수산해양교육연구
• /
• 제23권3호
• /
• pp.425-432
• /
• 2011

하계와 추계사이 황해저층냉수괴의 분포양상과 영양염 특성을 파악하기 위하여 2006년 9월에 황해 내 15개 정점에서 수온, 염분, 영양염류 등을 조사하였다. 9월에 연구해역의 표층수는 $20^{\circ}C$ 이상을 나타내는 양자강 희석수가 분포하고, 30m이심층에서는 $10^{\circ}C$ 이하의 냉수괴가 분포하였다. 특히 50m이심층에서는 $8^{\circ}C$ 이하의 수괴가 북위 $35^{\circ}$까지 남하하고 있었으며 조사정점에서 우리나라 연안쪽보다는 중국연안쪽에 확장되고 있음을 나타내고 있었다. $8^{\circ}C$의 냉수괴가 분포하는 50m이심층에서의 염분은 33.5psu로 상대적으로 높게 분포하며 북쪽으로 밀려 올라가고 있는 형상으로 수온, 염분 전선역이 형성되고 있음을 보여주고 있다. 영양염류 등 총무기질소 농도분포는 냉수괴에서 표층수보다 2배 이상 높은 농도를 보여 저층에서 저온현상에 의한 난분해와 소모가 낮음을 보여주고 있다. 결과적으로 9월까지 지층냉수괴는 북위 $35^{\circ}$까지 남하하고 있으며 냉수괴 내 높은 영양염 농도를 함유하고 있었다.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• 국제지역연구
• /
• 제20권2호
• /
• pp.113-140
• /
• 2016

본 논문에서는 선행 연구를 통해 중진국 함정 논의의 주요 근거들을 추출하고 이들 근거를 중국경제 현실에 적용하여 '중국 중진국 함정 논의'의 객관적 근거와 위기 요인을 우선 확인해 보려 하였다. 그런 다음 향후 함정에 빠지지 않기 위해 중국이 어떤 경제개혁을 추진해야 하는지에 대해 살펴보는 것을 중요한 과제로 삼고 있다. 함정 유발 요인에 대한 선행 연구 검토 후 추출한 6가지 핵심 요인을 준거로 삼아 중국 경제에 대응시켜 본 결과 중국경제가 중진국 함정에 빠질 수 있는 가능성이 높아지고 있어 중대한 전환점에 서 있음을 알 수 있었다. '과잉투자'-'과잉설비'에 따른 'TFP 지속감소, '인구보너스 소멸과 고령화', '경제주체별 과다 부채와 기업구조조정 및 금융불안정', '소득불균등 확대', '정보통신 확산과 금융 인프라 접근성 및 투명성 지수 등 사회적 자본 미비' 등의 문제가 큰 우려요인으로 등장했음을 알 수 있었다. 그런데 이들 위기 신호들은 모두 지금까지의 중국이 추진해 온 성장모델, 즉 요소투입형 성장과 정부주도 부채의존형 성장모델의 한계를 보여주고 있다는 점에서 정부실패 교정을 필요로 하는 것들임을 또한 확인할 수 있었다. 함정을 피하기 위한 중국 정부의 정책방향은 대체로 제대로 설정된 상태이지만 이행과정이 쉽지 않다는 증거가 곳곳에서 나타나고 있었다. 결국 지금까지의 각종 '정부 실패'를 수정할 수 있는 정부 차원의 혁신에만 매달려서는 명확한 한계에 봉착할 수 있으므로 어떻게든 시장의 자체적인 상시 구조조정 능력이 배양될 수 있는 틀을 만들어 내는 것이 중국의 경우 더 없이 중요한 요소임을 알 수 있었다. 특히 2015년부터 위안화 SDR 편입이 확정되면서 대외적 측면에서도 큰 제약에 직면할 수밖에 없어 향후 중진국 함정 탈출을 위한 정책지향은 더욱 큰 제약에 직면할 수 있음도 알 수 있었다.

• 대한족부족관절학회지
• /
• 제22권3호
• /
• pp.100-104
• /
• 2018

Purpose: An axillary crutch is the most commonly used assistive device in foot and ankle patients who require nonweightbearing. On the other hand, its use frequently induces axillary or wrist pain and critical neurovascular injuries have been reported in several studies. This study compared the clinical outcomes of patients using the knee walker and axillary crutch. Materials and Methods: A retrospective analysis was performed comparing the utility of a knee walker and axillary crutch as a nonweightbearing ambulatory aid for 62 foot and ankle patients treated between November 2016 and March 2018. A comparative study of the two orthosis could be performed because all the patients temporarily used an axillary crutch before or after the use of a knee walker. A demographic study and comparative analysis based on the visual analogue scale (VAS) satisfaction score (0~100), complications, and fall down history were evaluated. Furthermore, under the assumption of having retreatment, their preference of orthosis between the knee walker and axillary crutch was investigated. Results: The mean age of the patients was 36.5 and the mean duration of ambulation with a knee walker and axillary crutch were 5.2 and 2.4 weeks. The VAS satisfaction score of the knee walker and crutch was 88.8 and 27.5, respectively (p<0.05). The most frequent complications of the knee walker and crutch were ipsilateral knee pain (6 cases) and axillary or wrist pain (56 cases), respectively. No case of falling down occurred during knee walker ambulation, but there were two cases of crutch ambulation. Fifty-eight patients (93.5%) preferred the knee walker and four patients (6.5%) preferred a crutch. Conclusion: Compared to the axillary crutch, the knee walker afforded lower complication and higher satisfaction. Most patients preferred the knee walker to a crutch. Therefore, the knee walker is an efficient and safe orthosis for foot and ankle patients who require nonweightbearing.

• 대한물리치료과학회지
• /
• 제3권2호
• /
• pp.1011-1019
• /
• 1996

The incidence of spinal cord injury increase due to traffic accident, industrial accident and leisure sports. Spinal cord injury damages motor and sensory function below the injury level, also affects autonomic functions associated with voiding and defecation. Sexual dysfunction and psychosocial, vocational maladaptations are also some of the unwanted consequences of injury. The purpose of this study is look for means to prevent and to manage complications in spinal cord injury through investigation and analysis. The subjects of this study in spinal cord injured patients were admitted to the department of physical therapy, Kwangju christian Hospital, Nam Kwang Hospital, Chun Nam university Hospital and Cho Sun university Hospital, from April, 1, 1995 to March, 31, 1996. The results are as follows: 1. The subjects comprised 96 cases of spinal cord injury, ranging from 17 to 85(mean-40.8 yrs) and included 72 males and 24 females. Among these patients, 58 were cervical injury, 20 were thoracic injury and 18 were lumbar injury. 2. As for a major causative of spinal cord injury were traffic accident(59.4%), fall down (27.1 %), and motocycle(4.2%).. 3. The bladder control were taken by indwelling cathetar(41.7%), Crede maneuver(37.5%) and self voiding(16.7%). The bowel control were taken by all aid(61.5%), assitance(32.3%) and self defecation(6.2%). 4. Possible of sexual function were 35 cases (47.9%). 5. The device of transfer used wheel chair(69.8%) and bed(16.7%). 6. The patients with higher cord lesion got more serious pain than lower cord lesion. Also the patients with higher cord lesion got a serious spasticity. 7. The incidence of decubitus ulcer among 96 patients were in case 46(47.9%). The largest group of the pressure sore sites were sacral portion(82.0%), less than 1 month of onset occured a large numbers(50%). Incidence of pressure sore by spasticity occured many patients in case of mild or moderate. Incidence of pressure sore by pain occured many patients in case of severe pain.

• Journal of Yeungnam Medical Science
• /
• 제4권2호
• /
• pp.131-138
• /
• 1987

1. 총 8예중 남자 6례, 여자 2례이었다. 2. 손상의 원인은 낙상이 4례로 가장 많았다. 3. Bado 분류에 의한 빈도는 I형이 4례(50%), II형 1예(12.5%), III형 3예(37.5%)이었다. 4. 척골골절의 위치는 상 1/3 이상 부위가 7예이었다. 5. 요골두 탈구 방향은 전방이 3예로가장 많았다. 6. 치료는 소아는 2예 모두 비수술적 방법으로 하였으며 성인 6예중 2예는 도수정복하고 4례는 골골절윤 압박금속판을 사용하여 내고정하였으며 골두 탈구는 모두 도수정복하였다. 7. 결과는 Bruce 등에 의한 판정으로 excellent 3예, good 2례, fair 1예, poor 2례이었다.

• 화약ㆍ발파
• /
• 제29권2호
• /
• pp.67-80
• /
• 2011

최근 노후화한 구조물 기능의 회복, 도시의 재개발, 부지의 유효이용 등을 배경으로 토목, 건축의 분야에 관계없이 구조물의 해체 요구가 늘어나고 있다. 과거 국내 Shell 구조물은 벽돌로 높이가 낮게 지어졌고, 이와 같은 해체 대상물을 효율적으로 해체한다는 것은 특별한 문제가 되지 않았다. 그러나 최근에는 높이가 높은 철근콘크리트 Shell 구조물이 해체대상이 되는 경우가 많아지고 있어 구조물을 얼마나 효율적인 해체할 것인가, 공사로 인한 진동, 소음 등의 환경에 미치는 영향을 얼마나 저감시킬 것인가라는 주요 관심사가 되고 있다. 이것을 해결하는 방법의 하나로 화약을 이용해 순간에 붕괴, 전도하는 발파해체공법이 있다. 본 논문은 제주특별자치도 제주시 삼양일동 900번지에 있는 제주화력발전소 내 기력 1호기 70m 높이의 연돌을 화약량 13.5kg과 전기뇌관 100개를 사용하여 원하는 방향으로 확실히 전도를 한 사례로 발파해체에 관한 계획에서부터 결과까지의 과정에 대해 기술하고자 한다.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.18-25
• /
• 1983

The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.49-56
• /
• 2013

The statistics of recent accidents in warehouses show that a heavy toll of lives were produced by various accidents, e.g. collision, overturn, fall, slip, exposure to harmful substances or environments, etc. Of significant concern amongst them is the collision, especially the collision between forklift and storage rack structure. Accordingly, this study focuses on behavioral characteristics of rack structure subjected to dynamic impact loading of a forklift. For this purpose, time-domain response analysis has been performed on a standard 2-bay six-story rack structure consisting of columns, beams and bracing members with perforated open section. In order to investigate the most critical scenario, the impact loads are applied in both down-aisle and cross-aisle directions, and the impact locations are also varied along the shelves of the palettes. In order to deal with storage distributions, three types of rack structures are further taken into account: original empty rack structure with no storage, half-loaded rack structure and fully-loaded rack structure. The numerical simulation results demonstrate that the dynamic characteristics of the rack structure are significantly dependent on the distribution of the storage goods and its natural period varies from 0.24sec to 1.06sec, approximately 4.4 times. Further, the parametric studies show that the forklift impact is most critical to the safety of the rack structure when it collides either at the base or at the top of the rack structure.

• 대한족부족관절학회지
• /
• 제8권1호
• /
• pp.92-96
• /
• 2004

Purpose: To analyze the clinical and radiological results of the operative treatment in the avulsion fracture on the base of the fifth metatarsal. Materials and Methods: We studied retrospectively, 11 patients of avulsion fracture on the base of the fifth metatarsal operated and followed over 1 year, from February 2000 to May 2002. There were eight men and three women and the average age was 39 years old. The mean follow up period was 14 months. Ten cases were slip-down and one case was fall from a height injuries. We used the modified Foot Score by Wiener for the clinical evaluation, and analyzed the time of union and state of reduction radiologically. Results: In clinical results, we had ten excellent and one good cases by the modified Foot Score at last follow-up. In radiologic results, the complete bony union was achieved in all cases and the duration of the bony union was 37 days in average. Conclusion: We had good result for the avulsion fractures on the base of the fifth metatarsal treated by the operation. This study shows the operation was recommended for the moderate and severe displacement of the avulsion fractures on the base of the fifth metatarsal.