• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.13-22
• /
• 2004

줄말뚝이 설치된 지반에서 지반의 측방변형에 의한 지반아칭발생시 말뚝주변지반의 파괴는 지반아칭영역중 외부아 치의 정상부에서 정상파괴가 발생될 때부터 시작하여 말뚝전면의 패기부에서 캡파괴가 발생될 때까지 진행된다. 따라서, 측방변형지반속 줄말뚝에 작용하는 측방토압은 정상파괴와 캡파괴 모두의 경우를 검토할 필요가 있다. 정상파괴시의 측방토압 산정식은 원주공동확장이론을 적용하여 제안할 수 있다. 이 제안식을 검토한 결과 말뚝에 작용하는 측방토압은 주변지반의 내부마찰각, 점착력 및 수평토압과 말뚝직경 및 말뚝설치간격에 큰 영향을 받고 있음을 알 수 있다. 그리고, 캡파괴에 의한 측방토압과 정상파괴에 의한 측방토압의 이론식을 이용하여 줄말뚝에 작용하는 측방토압 범위를 정의할 수 있다. 또한, 본 논문에서는 캡파괴와 정상파괴시 측방토압의 이론치과 모형실험으로부터 구한 실험치를 비교 검토하였다. 모형실험에서 얻은 캡파괴와 정상파괴의 실험치는 제안된 각 이론의 이론치와 잘 일치하고 있으므로, 제안된 이론식의 합리성을 확인할 수 있다.

• 한국지반신소재학회논문집
• /
• 제7권3호
• /
• pp.31-40
• /
• 2008

탄소성구성방정식을 적용한 유한요소법을 이용하여 흙막이벽의 변형형상에 따른 배면지반의 변형거동을 예측하였다. 굴착배면 지반의 변형형상은 흙막이벽 부근에서는 흙막이벽 변형형상과 유사하게 나타나지만 흙막이벽으로부터 멀어질수록 켄틸레버 형상으로 변한다. 그리고 흙막이벽의 상부변형을 억제시키면 배면지반의 변형(침하량, 측방이동량)을 감소시킬 수 있다. 또한, 굴착에 따른 흙막이벽의 변형형상은 굴착배면지반의 소성파괴영역 및 안전율 저하영역에 영향을 미치는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제34권3호
• /
• pp.441-452
• /
• 2020

Within the French CIFRE research project COMINO, an innovative type of composite beam was developed for buildings that need fire resistance with no additional supports in construction stage. The developed solution is composed of a steel U-shaped beam acting as a formwork in construction stage for a reinforced concrete part that provides the fire resistance. In the exploitation stage, the steel and the reinforced concrete are acting together as a composite beam. This paper presents the investigation made on the load bearing capacity of this new developed steel-concrete composite section. A full-scale test has been carried out at the Laboratory of Structural Engineering of the University of Luxembourg. The paper presents the configuration of the specimen, the fabrication process and the obtained test results. The beam behaved compositely and exhibited high ductility and bending resistance. The shear connection in the tension zone was effective. The beam failed by a separation between the slab and the beam at high deformations, excessive shear forces conducted to a failure of the stirrups in this zone. The test results are then compared with good agreement to analytical methods of design based on EN 1994 and design guidelines are given.

• 지구물리
• /
• 제7권4호
• /
• pp.305-311
• /
• 2004

사면 붕괴 및 활동 발생지점을 중점대상으로 보강재의 응력 측정 및 변위 수반여부를 판단하기 위하여 경사계, 변형율계 및 간극수압계 등의 계측기를 설치하였으며, 이로부터 사면의 실시간 건전도 모니터링의 가능성을 보여 주었다. 본 연구에서는 현장계측을 통하여 사면의 거동, 억지말뚝의 효과 및 활동면에서의 응력분포간의 관계를 밝히고자 하였다.

• Structural Engineering and Mechanics
• /
• 제82권6호
• /
• pp.713-724
• /
• 2022

Effects of coal tensile strength and plow configuration on the coal fragmentation process was modeled by two-dimensional particles flow code (PFC2D). Three tensile strength values, 0.5, 1,5 and 3.5 MPa were considered in this numerical study. The cutters of plow penetrated in the coal for 4 mm at a rate of 0.016 m/s. According to the PFC manual, the local damping factor was 0.7. Three failure mechanism of coal during the fragmentation process by plow were modelled. The coal material beneath the cutters showed the elastic, plastic and fracturing behaviors in this analysis. In all the models, the plastic zone was fractured and some micro-cracks were induced but the elastic zone remained undamaged. It was observed that the tensile strength affected the failure mechanism of coal significantly and as it increased the extent of the fractured zone underneath the plow cutter decreased during the fragmentation process.

• 한국재난관리표준학회지
• /
• 제2권2호
• /
• pp.75-83
• /
• 2009

암반사면에 대한 표면조사 시에는, 암반 사면파괴로 인한 재해의 원인이 될 수 있는 파쇄대에서의 응력이완, 노출되지 않은 불연속면 등의 요인들을 고려하지 못하는 한계가 있다. 이에 본 고에서는 사면의 절취 또는 절취사면의 유지관리에 있어서 사면 안정성에 대한 판단을 도와 사면 파괴로 인한 재해를 예방하는 방안을 제시하고자 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.925-930
• /
• 2006

During the excavation of a tunnel portal, failure zones around the tunnel heading occur and also the ground supports itself. In a portal, its location and the ground characteristic have a great influence on the stability of the tunnel. Therefore, the failure mechanism of a tunnel heading and how to assess the stability of the tunnel are very important. In this paper, the numerical analyses were executed to evaluate the safety factor using strength reduction technique. The influence area of an excavation was also predicted through a case study in which no-support case and support case with the Pattern P-6 were compared in terms of the ground class and the shear strain.

• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.269-282
• /
• 2001

In this paper the results of an experimental program devoted to the assessment of the cyclic behaviour of full scale, European type, beam-column subassemblages with welded connections are presented. Six tests (five cyclic and one monotonic) have been carried out on three different series of specimens, encompassing a total of eighteen tests. The three specimen series have been designed with the aim of defining the effect of the column size on the connection behaviour, under different applied loading histories. The tests have evidenced the effect of the column size and panel zone design and of the applied loading history on the cyclic behaviour and failure modes of the connections.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1782-1788
• /
• 2007

This study analyzed ground settlement and ground stress depending on tunnel excavation and the ground reinforcing grouting methods for double line road tunnel through deep weathered zone. Diameter of double line road tunnel was approximately 12m and umbrella arch method and side wall reinforcing grouting were applied. The ring-cut split excavation method and CD-cut excavation method for excavation method were applied. Analysis of failure rate and vertical stress ratio show that the tunnel for which the height of the cover(H) was higher than four times the diameter, it can be considered a deep tunnel. Comparisons of various excavation and ground reinforcement methods were showed that CD-cut method results in lower surface and crown settlement, and lower failure rate than where using Ring-cut split method. In addition the side wall reinforcing grouting resulted in reduction of tunnel displacement and settlement.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.209-218
• /
• 2017

Sea ice is the main factor affecting the safety of the Arctic engineering. However, traditional numerical methods derived from classical continuum mechanics have difficulties in resolving discontinuous problems like ice damage. In this paper, a non-local, meshfree numerical method called "peridynamics", which is based on integral form, was applied to simulate the interaction between level ice and a cylindrical, vertical, rigid structure at different velocities. Ice in the simulation was freshwater ice and simplified as elastic-brittle material with a linear elastic constitutive model and critical equivalent strain criterion for material failure in state-based peridynamics. The ice forces obtained from peridynamic simulation are in the same order as experimental data. Numerical visualization shows advantages of applying peridynamics on ice damage. To study the repetitive nature of ice force, damage zone lengths of crushing failure were computed and conclude that damage zone lengths are 0.15-0.2 times as ice thickness.