Browse > Article
http://dx.doi.org/10.12989/sem.2022.82.6.713

The numerical investigation of tensile strength of coal model on the performance of coal plow using Particle Flow Code  

Fu, Jinwei (School of Civil Engineering and Transportation, North China University of Water Resources and Electric Power)
Haeri, Hadi (School of Civil Engineering and Transportation, North China University of Water Resources and Electric Power)
Sarfarazi, Vahab (Department of Mining Engineering, Hamedan University of Technology)
Marji, Mohammad Fatehi (Mine Exploitation Engineering Department, Faculty of Mining and Metallurgy, Institution of Engineering)
Li, Tong (School of Civil Engineering and Transportation, North China University of Water Resources and Electric Power)
Publication Information
Structural Engineering and Mechanics / v.82, no.6, 2022 , pp. 713-724 More about this Journal
Abstract
Effects of coal tensile strength and plow configuration on the coal fragmentation process was modeled by two-dimensional particles flow code (PFC2D). Three tensile strength values, 0.5, 1,5 and 3.5 MPa were considered in this numerical study. The cutters of plow penetrated in the coal for 4 mm at a rate of 0.016 m/s. According to the PFC manual, the local damping factor was 0.7. Three failure mechanism of coal during the fragmentation process by plow were modelled. The coal material beneath the cutters showed the elastic, plastic and fracturing behaviors in this analysis. In all the models, the plastic zone was fractured and some micro-cracks were induced but the elastic zone remained undamaged. It was observed that the tensile strength affected the failure mechanism of coal significantly and as it increased the extent of the fractured zone underneath the plow cutter decreased during the fragmentation process.
Keywords
coal plow; particle flow code; tensile strength;
Citations & Related Records
Times Cited By KSCI : 9  (Citation Analysis)
연도 인용수 순위
1 Liu, B., Yang, H. and Karekal, S. (2021), "Reliability analysis of TBM disc cutters under different conditions", Underg. Space, 6(2), 142-152. https://doi.org/10.1016/j.undsp.2020.01.001.   DOI
2 Cheng, J.L., Jiang, Z.H., Han, W.F., Li, M.L. and Wang, Y.X. (2020), "Breakage mechanism of hard-rock penetration by TBM disc cutter after high pressure water jet precutting", Eng. Fract. Mech., 240, 107320. https://doi.org/10.1016/j.engfracmech.2020.107320.   DOI
3 Das, R. and Cleary, P.W. (2015), "Application of a mesh-free method to modelling brittle fracture and fragmentation of a concrete column during projectile impact", Comput. Concrete, 16(6), 933-961. https://doi.org/10.12989/cac.2015.16.6.933.   DOI
4 Li, B., Zhang, B., Hu, M., Liu, B., Cao, W. and Xu, B. (2022), "Full-scale linear cutting tests to study the influence of pre-groove depth on rock-cutting performance by TBM disc cutter", Tunnel. Underg. Space Technol., 122, 104366. https://doi.org/10.1016/j.tust.2022.104366   DOI
5 Li, Y. and Zhou, H. (2018), "Numerical investigations on stability evaluation of a jointed rock slope during excavation using an optimized DDARF method", Geomech. Eng., 14(3), 232-243. https://doi.org/10.12989/gae.2018.14.3.232.   DOI
6 Liu, H.Y. (2004), "Numerical modelling of the rock fragmentation process by mechanical tools", PhD Thesis, Lulea University of Technology, Sweden.
7 Liu, X. (2020), "Experimental and numerical study on pre-peak cyclic shear mechanism of artificial rock joints", Struct. Eng. Mech., 74(3), 221-234. https://doi.org/10.12989/sem.2020.74.3.221.   DOI
8 Ma, H., Yin, L. and Ji, H. (2011), "Numerical study of the effect of confining stress on rock fragmentation by TBM cutters", Int. J. Rock Mech. Min. Sci., 48(6), 1021-1033. https://doi.org/10.1016/j.ijrmms.2011.05.002.   DOI
9 Potyondy, D.O. and Cundall, P.A.,(2004), "A bonded-particle model for rock", Int. J. Rock Mech. Min. Sci., 41, 1329-1364. https://doi.org/10.1016/j.ijrmms.2004.09.011.   DOI
10 Saksala, T., Gomon, D., Hokka, M. and Kuokkala, V.T. (2014), "Numerical and experimental studies of percussive drilling with a triple-button bit on Kuru granite", Int. J. Impact Eng., 72, 56-66. https://doi.org/10.1016/j.ijimpeng.2014.05.006.   DOI
11 Golewski, G.L. (2021b), "Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length-Using the crack tip tracking (CTT) method - In the fracture toughness examinations under Mode II, through digital image correlation", Constr. Build. Mater., 296, 122362. https://doi.org/10.1016/j.conbuildmat.2021.122362.   DOI
12 Lee, J. and Hong, J.W. (2018), "Crack initiation and fragmentation processes in pre-cracked rock-like materials", Geomech. Eng., 15(5), 1047-1059. https://doi.org/10.12989/gae.2018.15.5.1047.   DOI
13 Ma, H.S., Yin, L.J. and Ji, H.G. (2011), "Numerical study of the effect of confining stress on rock fragmentation by TBM cutters", Int. J. Rock Mech. Min. Sci., 48(6), 1021-1033. http://dx.doi.org/10.1016/j.ijrmms.2011.05.002 .   DOI
14 Rostami, J. (2013), "Study of pressure distribution within the crushed zone in the contact area between rock and disc cutters", Int. J. Rock Mech. Min. Sci., 57(1), 172-186. http://doi.org/10.1016/j.ijrmms.2012.07.031.   DOI
15 Wang, X., Yuan, W., Yan, Y. and Zhang, X. (2020), "Scale effect of mechanical properties of jointed rock mass: A numerical study based on particle flow code", Geomech. Eng., 21(3), 259-268. https://doi.org/10.12989/gae.2020.21.3.259.   DOI
16 Xue, Y., Zhou, J., Liu, C., Shadabfar, M. and Zhang, J. (2021), "Rock fragmentation induced by a TBM disc-cutter considering the effects of joints: A numerical simulation by DEM", Comput. Geotech., 136, 104230. https://doi.org/10.1016/j.compgeo.2021.104230.   DOI
17 Akbas, S. (2016), "Analytical solutions for static bending of edge cracked micro beams", Struct. Eng. Mech., 59(3), 66-78. https://doi.org/10.12989/sem.2016.59.3.066.   DOI
18 Bar-Cohen, Y. and Zacny, K. (2009), Drilling in Extreme Environments: Penetration and Sampling on Earth and other Planets, Wiley-VCH Verlag, Weinheim, Germany.
19 Choi, S.W., Chang, S.H., Park, Y.T., Lee, G.P. and Bae, G.J. (2014), "Comparative analysis of cutter acting forces and axial stresses of single and double disc cutters by linear cutting tests", J. Korean Tunnel. Underg. Space Assoc., 16(2), 181-191. (in Korean) http://doi.org/10.9711/KTAJ.2014.16.2.181.   DOI
20 Copur, H., Aydin, H., Bilgin, N., Balci, C., Tumac, D. and Dayanc, C. (2014), "Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model", Tunnel. Underg. Space Technol., 42(3), 1-14. http://doi.org/10.1016/j.tust.2014.01.006.   DOI
21 Golewski, G.L. (2021a), "Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method", Measure., 181, 109632. https://doi.org/10.1016/j.measurement.2021.109632.   DOI
22 Szostak, B. and Golewski, G.L. (2020), "Improvement of strength parameters of cement matrix with the addition of siliceous fly ash by using nanometric C-S-H seeds", Energies, 13(24), 6734. https://doi.org/10.3390/en13246734.   DOI
23 Szostak, B. and Golewski, G.L. (2021), "Rheology of cement pastes with siliceous fly ash and the CSH nano-admixture", Mater., 14(13), 3640. https://doi.org/10.3390/ma14133640.   DOI
24 Mishnaevsky, L.L. (1995), "Physical mechanisms of hard rock fragmentation under mechanical loading: A review", Int. J. Rock Mech. Min. Sci., 32, 763-776.   DOI
25 Shaowei, H., Aiqing, X., Xin, H. and Yangyang, Y. (2016), "Study on fracture characteristics of reinforced concrete wedge splitting tests", Comput. Concrete, 18(3). 337-354. https://doi.org/10.12989/cac.2016.18.3.337.   DOI
26 Wu, N., Liang, Z., Li, Y., Qian, X. and Gong, B. (2019), "Effect of confining stress on representative elementary volume of jointed rock masses", Geomech. Eng., 18(6), 627-638. https://doi.org/10.12989/gae.2019.18.6.627.   DOI
27 Xia, Y.M., Guo, B., Cong, G.Q., Zhang, X.H. and Zeng, G.Y. (2017), "Numerical simulation of rock fragmentation induced by a single TBM disc cutter close to a side free surface", Int. J. Rock Mech. Min. Sci., 91, 40-48. https://doi.org/10.1016/j.ijrmms.2016.11.004.   DOI
28 Yaylac, M. (2016), "The investigation crack problem through numerical analysis", Struct. Eng. Mech., 57(6), 1143-1156. https://doi.org/10.12989/sem.2016.57.6.1143.   DOI
29 Yin, L., Miao, C., He, G., Dai, F. and Gong, Q. (2016), "Study on the influence of joint spacing on rock fragmentation under TBM cutter by linear cutting test", Tunnel. Underg. Space Technol., 57, 137-144. https://doi.org/10.1016/j.tust.2016.02.018.   DOI
30 Zhai, S.F., Zhou, X.P., Bi, J. and Xiao, N. (2016), "The effects of joints on rock fragmentation by TBM cutters using General Particle Dynamics", Tunnel. Underg. Space Technol., 57, 162-172. https://doi.org/10.1016/j.tust.2016.01.035.   DOI
31 Szostak, B. and Golewski, G.L, (2018), "Effect of nano admixture of CSH on selected strength parameters of concrete including fly ash", IOP Conf. Ser.: Mater. Sci. Eng., 52(41), 52096601.
32 Yin, L.J., Gong, Q.M., Ma, H.S., Zhao, J. and Zhao, X.B. (2014), "Use of indentation tests to study the influence of confining stress on rock fragmentation by a TBM cutter", Int. J. Rock Mech. Min. Sci., 72, 261-276. https://doi.org/10.1016/j.ijrmms.2014.07.022.   DOI
33 Zang, A. and Stephansson, O. (2010), Stress Field of the Earth's Crust, Springer Science & Business Media.
34 Zhu, X. and Liu, W. (2018), "The rock fragmentation mechanism and plastic energy dissipation analysis of rock indentation", Geomech. Eng., 16(2), 195-204. https://doi.org/10.12989/gae.2018.16.2.195.   DOI
35 Yin, L.J., Gong, Q.M., Ma, H.S., Zhao, J. and Zhao, X.B. (2014), "Use of indentation tests to study the influence of confining stress on rock fragmentation by a TBM cutter", Int. J. Rock Mech. Min. Sci., 72, 261-276. http://doi.org/10.1016/j.ijrmms.2014.07.022.   DOI