• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.497-501
• /
• 2008

To improve occupants' safety in an emergency, crashworthy design is necessary to rotorcraft design and development. To improve crashworthiness capability, most of the crash energy should be absorbed by rotorcraft and the energy transmitted to the occupants should be minimized. To absorb the crash energy efficiently, the individual energy attenuation provided by landing gear, structure, fuel tank and seats should be considered totally. Especially, landing gear has the important role for crashworthy design because landing gear absorbs relatively large energy for the crash landing. In addition, military specifications require failure of landing gear shall not increase danger to any occupants by penetration of the airframe. To meet the specification requirements, failure mechanism should be prepared so that landing gear is collapsed safely and doesn't penetrate the airframe. In this study, design of failure mechanism which is necessary for the rotorcraft landing gear was performed and the results were presented.

• 한국지반신소재학회논문집
• /
• 제4권2호
• /
• pp.19-28
• /
• 2005

본 논문은 보강 사면 파괴메카니즘을 알아보기 위하여 실제 보강 사면을 1/5로 축소하여 실내 실험을 수행하였다. 상사 법칙을 적용하여 모형에 대한 제원을 산정하였으며 실제 시공 조건과 유사한 방법으로 모형 사면을 조성하였다. 보강 사면 파괴 메카니즘을 알아보기 위한 축소 모형 실험은 상대 밀도, 경사, 수직 간격에 따라 성공적으로 수행되었다.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2004년도 학술발표회 논문집
• /
• pp.421-428
• /
• 2004

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.92-102
• /
• 1996

In this research, to develope the A1 7075/CFRP multilayered hybrid composites, CRALL(Carbon Reinforced aluminum lamiate) specimens were processed by autoclavecuring system that curing temperature, time, surface pretreatment condition of aluminum were constant. Andthe fatigye life and failure mechanism on CFRP volume fraction and fiber orientation of CRALLspecimens were investigated. A fatigue life was greatly influenced by effect of CFRP fiber volume fraction but it was less effected than those of fiber orientation. The fatigue failure arised from interface delamination of CFRP and aluminum sheet after shear fracture of aluminum layer. The failure mechanism is assumed that the aluminum laminates which divide the CFRP into many thim layers tend to arrest the failure propagation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.268-273
• /
• 2006

Slope failures can be occurred by complex mechanism. In this cases, failures shows characteristics of complex failure mechanism during progressive mass movements. A case is a merged large slide with two sliding events triggered by slip on fault plane. Another case shows extension of failure area by sliding or subsidence at backyards of toppling areas. Generally, areas of progressive failures have wider than them of simple events.

• 국제초고층학회논문집
• /
• 제2권2호
• /
• pp.141-152
• /
• 2013

This paper presents a brief overview of the recently developed performance-control method of moment frame design subjected to monotonously increasing lateral loading. The final product of any elastic-plastic analysis is a nonlinear loaddisplacement diagram associated with a progressive failure mechanism, which may or may not be as desirable as expected. Analytically derived failure mechanisms may include such undesirable features as soft story failure, partial failure modes, overcollapse, etc. The problem is compounded if any kind of performance control, e.g., drift optimization, material savings or integrity assessment is also involved. However, there is no reason why the process can not be reversed by first selecting a desirable collapse mechanism, then working backwards to select members that would lead to the desired outcome. This article provides an overview of the newly developed Performance control methodology of design for lateral resisting frameworks with a view towards integrity control and prevention of premature failure due to propagation of plasticity and progressive P-delta effects.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.129-130
• /
• 2005

The electrical stress has a major effect on the long-term reliability of the thyristor. Therefore, it is needed to analyze the relationship between reliability and stress. In this paper, we investigate the device failure mechanism which induced by the stress. And also investigate the effect of the thermal stress on the device failure and relationship between electrical and thermal stress. Two-dimensional process simulator ATHENA and device simulator ATLAS are used to analyze the failure mechanism of the device.

• Geomechanics and Engineering
• /
• 제13권3호
• /
• pp.431-446
• /
• 2017

Rock bridges in rock masses would increase the bearing capacity of Non-persistent discontinuities. In this paper the effect of ratio of rock bridge surface to joint surface, rock bridge shape and normal load on failure behaviour of intermittent rock joint were investigated. A total of 42 various models with dimensions of $15cm{\times}15cm{\times}15cm$ of plaster specimens were fabricated simulating the open joints possessing rock bridge. The introduced rock bridges have various continuities in shear surface. The area of the rock bridge was $45cm^2$ and $90cm^2$ out of the total fixed area of $225cm^2$ respectively. The fabricated specimens were subjected to shear tests under normal loads of 0.5 MPa, 2 MPa and 4 MPa in order to investigate the shear mechanism of rock bridge. The results indicated that the failure pattern and the failure mechanism were affected by two parameters; i.e., the ratio of joint surface to rock bridge surface and normal load. So that increasing in joint area in front of the rock bridge changes the shear failure mode to tensile failure mode. Also the tensile failure change to shear failure by increasing the normal load.

• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.375-384
• /
• 2022

The variation of the undrained shear strength (c_u) is an important consideration for assessing slope stability in engineering practice. Previous studies focused on the three-dimensional (3D) stability of slopes in normally consolidated clays generally assume the undrained shear strength increases linearly with depth but does not vary in the horizontal direction. To assess the 3D stability of slopes with spatially varying undrained shear strength, the kinematic approach of limit analysis was adopted to obtain the upper bound solution to the stability number based on a modified failure mechanism. Three types failure mechanism: the toe failure, face failure and below-toe failure were considered. A serious of charts was then presented to illustrate the effect of key parameters on the slope stability and failure geometry. It was found that the stability and failure geometry of slopes are significantly influenced by the gradient of c_u in the depth direction. The influence of c_u profile inclination on the slope stability was found to be pronounced when the increasing gradient of c_u in the depth direction is large. Slopes with larger width-to-height ratio B/H are more sensitive to the variation of c_u profile inclination.

• 한국지반신소재학회논문집
• /
• 제10권2호
• /
• pp.55-66
• /
• 2011

본 논문에서는 Back-to-Back(BTB) 보강토 옹벽의 파괴메커니즘에 관한 연구내용을 다루었다. 이를 위해 모형실험과 불연속체 해석(Discrete Element Method, DEM)을 도입한 수치해석을 수행하였다. 먼저 축소모형실험에서는 일반적으로 시공되는 Back-to-Back 보강토 옹벽을 1/10로 축소하여 1-g 모델을 구축한 후 자중만으로 파괴에 도달하도록 하였으며 보강재의 길이변화에 따른 파괴 메커니즘을 고찰하였다. 아울러 모형실험 결과를 토대로 검증된 DEM 해석모델을 이용하여 다양한 시공조건에 대한 해석을 수행하여 BTB 옹벽의 폭 및 보강재 길이에 따른 파괴 메커니즘을 고찰하고 그 결과를 현재 적용되는 FHWA 설계기준과 비교하였다.