• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1393-1400
• /
• 2009

The objective of this study is to validate local failure criteria, which were proposed based on the notched-bar specimen tests combining with finite element (FE) simulations, using the results of real-scale pipe failure tests. This study conducted burst test using wall-thinned pipe specimens, which were made of 4 inch Sch.80 ASTM A106 Gr.B carbon steel pipe, under simple internal pressure at ambient temperature and performed associated FE simulations. Failure pressures were estimated by applying the failure criteria to the results of FE simulations and were compared with experimental failure pressures. It showed that the local stress based criterion, given as true ultimate tensile stress of material, accurately estimated the failure pressure of wall-thinned pipe specimens. However, the local strain based criterion, which is fracture strain of material as a function of stress tri-axiality, could not predict the failure pressure. It was confirmed that the local stress based criterion is reliably applicable to estimation of failure pressure of local wall-thinned piping components.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제8회 학술강연회논문집
• /
• pp.269-279
• /
• 1997

본 연구에서는 탄소/에폭시 복합재료의 기계적 결합부의 결합강도 예측을 위한 구조해석과 실험을 수행했다. 복합재료 구조물의 결합부 설계에 있어 베어링파괴는 대단히 중요한 파괴형태 중 하나이다. 그래서 베어링 파괴를 해석적으로 예측하고 실험적으로 확인하였다. 순수인장 파괴(Net Tension Failure)와 베어링 파괴(Bearing Failure) 실험을 위해서 각각 두 가지 형상의 시편을 선택했다. 기계적 결합강도 예측에 사용된 방법은 특성길이(Characteristic Length)법과 연관된 Yamada-Sun 파괴기준(Failure Criterion)과 Tsai-Hill 최대일 이론이다. 그리고 인장특성길이와 압축특성길이는 실험을 통하여 얻어지며, 특히 압축특성길이 결정은 최근에 착안된 베어링파괴 실험으로부터 결정됐다. 위와 같은 예측 방법을 준등방성(Quasi - Isotropic) Carbon Epoxy HT245/RS3232에 적용하였다. 연구결과, 이론적인 복합재료 파괴예측이 실험결과와 잘 일치함을 확인할 수 있다.

• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.391-414
• /
• 2015

In this paper, stabilities of a plane slide rock slope under different hydraulic distributions were studied based on the nonlinear Barton-Bandis (B-B) failure criterion. The influence of various parameters on the stability of rock slopes was analyzed. Parametric analysis indicated that studying the factor of safety (FS) of planar slide rock slopes using the B-B failure criterion is both simple and effective and that the effects of the basic friction angle of the joint (${\varphi}_b$), the joint roughness coefficient (JRC), and the joint compressive strength (JCS) on the FS of a planar slide rock slope are significant. Qualitatively, the influence of the JCS on the FS of a slope is small, whereas the influences of the ${\varphi}_b$ and the JRC are significant. The FS of the rock slope decreases as the water in a tension crack becomes deeper. This trend is more significant when the flow outlet is blocked, a situation that is particularly prevalent in regions with permafrost or seasonal frozen soil. Finally, the work is extended to study the reliability of the slope against plane failure according to the uncertainty from physical and mechanics parameters.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.561-572
• /
• 2019

In the design criterion for the nuclear power plant piping system, the limit state of the piping against an earthquake is assumed to be plastic collapse. The failure of a common piping system, however, means the leakage caused by the cracks. Therefore, for the seismic fragility analysis of a nuclear power plant, a method capable of quantitatively expressing the failure of an actual piping system is required. In this study, it was conducted to propose a quantitative failure criterion for piping system, which is required for the seismic fragility analysis of nuclear power plants against critical accidents. The in-plane cyclic loading test was conducted to propose a quantitative failure criterion for steel pipe elbows in the nuclear power plant piping system. Nonlinear analysis was conducted using a finite element model, and the results were compared with the test results to verify the effectiveness of the finite element model. The collapse load point derived from the experiment and analysis results and the damage index based on the stress-strain relationship were defined as failure criteria, and seismic fragility analysis was conducted for the piping system of the BNL (Brookhaven National Laboratory) - NRC (Nuclear Regulatory Commission) benchmark model.

• 한국지반공학회논문집
• /
• 제30권3호
• /
• pp.73-85
• /
• 2014

암반설계에 필요한 암반의 강도정수 값을 산정할 시에는, 암반 내 원위치시험이 극히 제한적이며 비용이 고가여서 주로 Hoek-Brown 파괴기준을 이용한 추정식을 사용하고 있다. Hoek-Brown 파괴기준식을 사용할 때에는 이 식을 Mohr-Coulomb 파괴기준식으로 변경하여야 지반의 강도정수 값을 추정할 수 있다. 그러나 파괴기준의 변경과정은 계산 및 분석단계 등 여러 단계를 거쳐야 하는 불편함이 있다. 따라서 본 연구에서는 현장에서 접할 수 있는 다양한 조건의 암반상태를 모델링한 후, 일차적으로 Hoek-Brown 파괴기준을 이용하여 강도정수 값을 산정하였다. 그 결과를 분석하여 RMC, 암석의 일축압축강도(${\sigma}_c$), 암석계수($m_i$)의 3가지 사용요소를 이용하여 한번의 계산과정을 통해 암반의 강도정수를 추정할 수 있는 추정식 및 현장에서 손쉽게 강도정수를 산정할 수 있는 추정도표를 제안하였다. 이러한 제안 도표 및 제안식을 기존의 Hoek-Brown 및 Mohr-Coulomb 파괴기준식과 비교, 검토함으로써 본 제안의 타당성을 검증하였다.

• 터널과지하공간
• /
• 제21권6호
• /
• pp.526-535
• /
• 2011

중간주응력을 고려할 수 있는 새로운 콘크리트 파괴조건식을 제안하였다. 제안된 파괴조건식은 Mohr-Coulomb 파괴조건식과 Willam-Warnke의 파괴조건식의 장점을 수용하고 있으므로 자오면에서는 선형파괴식으로 나타나고 팔면체응력면에서는 항상 볼록인 궤적을 보이며 특이성을 갖지 않는다. 진삼축압축시험 결과를 이용한 회귀분석을 통하여 제안된 파괴조건식의 적합성을 검증하였다. 제안된 파괴조건식에 기초한 안전율 공식을 정의하고 이를 파일롯 플랜트에 설치된 콘크리트 플러그의 안전도 해석에 이용하였다. 제안된 안전율 공식은 팔면체응력면에서 응력상태 점의 파괴곡면에 대한 접근도를 의미한다. 마지막으로 플러그의 응력분포를 계산하기 위해 파일롯 플랜트에 대한 3차원 응력해석을 실시하였다. 플러그의 응력분포는 제안된 안전율 공식을 이용하여 안전율 분포로 변환시켰다. 콘크리트 플러그의 안전율 분포특성 분석을 통해 테이퍼형 및 쐐기형 플러그의 안전도를 평가하였다.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.360-365
• /
• 2009

In the manufacture of CFRP(Carbon Fiber Reinforced Polymer Composite) composite structures, various independent components join by bolts and pins. Holes for bolts and pins have an effect on the failure strength of such structures, because those act as notches in structures. The failure characteristic of such structures are different from those of plain plate subject to remote load. In this paper, tensile properties of woven CFRP composite plates with laminates of $0^{\circ}$, $30^{\circ}$ and $45^{\circ}$ were obtained according to ASTM D 3039. By using obtained tensile failure strength and Tan-Cheng failure criterion, tensile failure strength of CFRP laminate with arbitrary fiber angle were evaluated. Also, the degradation of tensile properties by center hole(${\phi}10mm$) with a remote load was evaluated and the failure strengths were applied to Tan's failure criterion, similarly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.365-370
• /
• 2004

Generally, component and FR-4 board are connected by solder joint. Because material properties of components and FR-4 board are different, component and FR-4 board show different coefficients of thermal expansion (CTE) and thus strains in component and board are different when they are heated. That is, the differences in CTE of component and FR-4 board cause the dissimilarity in shear strain and solder joint' failure. The first order Taylor series expansion of the limit state function incorporating with Tresca failure criterion is used in order to estimate the failure probability of solder joints under heated condition. Using shear stresses and shear strains appeared on the solder joint, we estimate the failure probability of solder joints with the Tresca failure criterion. The effects of random variables such as CTE, distance of the solder joint from the neutral point(DNP), temperature variation and height of solder on the failure probability of the solder joint are systematically studied by using the failure probability model with first order reliability method(FORM).

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.59-76
• /
• 2016

The non-linear Hoek-Brown failure criterion has been widely accepted and applied to evaluate the stability of rock slopes under plane-strain conditions. This paper presents a kinematic approach of limit analysis to assessing the static and seismic stability of three-dimensional (3D) rock slopes using the generalized Hoek-Brown failure criterion. A tangential technique is employed to obtain the equivalent Mohr-Coulomb strength parameters of rock material from the generalized Hoek-Brown criterion. The least upper bounds to the stability number are obtained in an optimization procedure and presented in the form of graphs and tables for a wide range of parameters. The calculated results demonstrate the influences of 3D geometrical constraint, non-linear strength parameters and seismic acceleration on the stability number and equivalent strength parameters. The presented upper-bound solutions can be used for preliminary assessment on the 3D rock slope stability in design and assessing other solutions from the developing methods in the stability analysis of 3D rock slopes.

• Journal of the Korean Data and Information Science Society
• /
• 제14권2호
• /
• pp.393-403
• /
• 2003

In this paper, various replacement policies for the general failure model are considered. There are two types of failure in the general failure model. One is Type I failure (minor failure) which can be removed by a minimal repair and the other is Type II failure (catastrophic failure) which can be removed only by a complete repair. In this model, when the unit fails at its age t, Type I failure occurs with probability 1-p(t) and Type II failure occurs with probability p(t), $0{\leq}p(t){\leq}1$. Under the model, optimal replacement policies for the long-run average cost rate and the limiting efficiency are considered. Also taking the cost and the efficiency into consideration at the same time, the properties of the optimal policies under the Cost-Priority-Criterion and the Efficiency-Priority-Criterion are obtained.