• Composites Research
• /
• v.18 no.2
• /
• pp.20-29
• /
• 2005

To evaluate the flexural deformation and strength of composite motor case above the glass transition temperature$(T_g),\;170^{\circ}C$, of resin material, a finite element analysis(FEA) model in which material non-linearity and progressive failure mode were considered was proposed. The laminated flexural specimens which have the same lay-up and thickness as the composite motor case were tested by 4-point bending test to verify the validity of FEA model. Also. mechanical properties in high temperature were evaluated to obtain the input values for FEA. Because the material properties related to resin material were highly deteriorated in the temperature range beyond $T_g$, the flexural stiffness and strength of laminated flexural specimen in $200^{\circ}C$ were degraded by also $70\%\;and\;80\%$ in comparison with normal temperature results. Above $T_g$, the failure mode was changed from progressive failure mode initiated by matrix cracking at $90^{\circ}$ ply in bottom side and terminated by delamination at the center line of specimen to fiber compressive breakage mode at top side. From stress analysis, the progressive failure mechanism was well verified and the predicted bending stiffness and strength showed a good agreement with the test results.

• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.17-24
• /
• 2000

Purpose: MCNS is found in approximately $85\%$ of the idiopathic nephrotic syndrome in children and shows good prognosis with initial steroid therapy. However in FSGS, there is poor prognosis with initial therapy and shows higher rate of progression to chronic renal failure and relapse after kindney transplantation. We have experienced 8 patients who were diagnosed as MCNS on initial renal biopsy and then progressed to FSGS on follow-up biopsy. So we have investigated their clinical course and risk factors for transition of MCNS to FSGS. Methods: We conducted a retrospective study with a review of histopathologic findings and clinical manifestations of 296 cases of MCNS and FSGS that were diagnosed from January 1988 to May 1999. We classified them into 3 groups according to the histopathologic finding; MCNS, FSGS, MCNS progressed to FSGS in follow-up biopsy. Results: The number of children was 296 cases comprising 241 cases($81.4\%$) showing MCNS, 8 cases($2.7\%$) transition group, 47 cases($15.9\%$) FSGS. The mean onset age was $6.0{\pm}2.6$years in MCNS, transition group $8.3{\pm}2.3$years, FSGS $7.2{\pm4.3$years, and the gender (M:F) ratio was 3.7:1 in MCNS, 3:1 in transition group, 1.8:1 in FSGS. Comparing the presence of initial hematuria, hypertension,24 hour urine protein, serum albumin, serum creatinine, there were significant difference between the transition group and the FSGS group in the following points; 24hour urine protein $684:342mg/m^2/hr$(P<0.05), serum albumin 1.92: 2.47g/dL(P<0.05), serum cholesterol 494:343mg/dL(P<0.05). Refractoriness to steroid therapy was 13.3$\%$ in MCNS. $12.5\%$ in transition group, $29.6\%$ in FSGS; significantly higher in FSGS(P<0.05). Immunosuppressant therapy was performed in $58.5\%$ of MCNS, $100\%$ in transition group, $80.8\%$ in FSGS; transition group showed significantly higher .ate(P<0.05) comparing with MCNS. Mean number of relapse and duration from onset to first relapse showed no significance difference between these groups. Conclusion: 249 patients with MCNS have been followed and $3.2\%$ (8 patients) of them has shown change in pathologic diagnosis from MCNS to FSCS. The risk factor for transition could not be found. Our results point to the need for a follow-up biopsy to certify the possibility of transition to FSCS in some MCNS cases with refractory cases to steroid therepy, frequent relapsing cases, or in case of no remission in spite of vigorous immunosuppressant therapy.

• Geomechanics and Engineering
• /
• v.7 no.5
• /
• pp.477-493
• /
• 2014

This study examines the behaviour of single micropiles subjected to axial tension or compression load in collapsible loess under in-situ moisture content and saturated condition. Five tension loading tests and five compression loading tests on single micropiles were carried out at a typical loess site of the Loess Plateau in Northwest China. A series of laboratory tests, including grain size distribution, specific gravity, moisture content, Atterberg limits, density, granular components, shear strength, and collapse index, were carried out during the micropile loading tests to determine the values of soil parameters. The loess at the test site poses a severe collapse risk upon wetting. The tension or compression load-displacement curves of the micropiles in loess, under in-situ moisture content or saturated condition, can generally be simplified into three distinct regions: an initial linear, a curvilinear transition, and a final linear region, and the bearing capacity or failure load can be interpreted by the L1-L2 method as done in other studies. Micropiles in loess should be considered as frictional pile foundations though the tip resistances are about 10%-15% of the applied loads. Both the tension and compression capacities increase linearly with the ratio of the pile length to the shaft diameter, L/d. For micropiles in loess under in-situ moisture content, the interpreted failure loads or capacities under tension are 66%-87% of those under compression. However, the prewetting of the loess can lead to the reductions of 50% in the tensile bearing capacity and 70% in the compressive bearing capacity.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.165-175
• /
• 2009

This study is concerned with creep characteristics of red shale in the Haman Formation by the single stage and multi stage loading tests. Creep constants in the Griggs's experiential equation, ${\epsilon}_t$= a+$b{\cdot}log$ t + $c{\cdot}t$, are determined by regression analysis on the total data obtained. The transition time between the primary and second creep means the time when the differential value of $b{\cdot}log$ t is equal to the differential value of $c{\cdot}t$. The correlation equation between loads (${\sigma}$%) and creep constants is deduced from the three times multi stage loading tests. Also a failure time under each loads is anticipated from creep constants and maximum strain at the failure.

• KDI Journal of Economic Policy
• /
• v.27 no.2
• /
• pp.1-43
• /
• 2005

This paper examines works of F. Hayek and M. Friedman on monetary and financial policies. This paper highlights their differences, and asks what yielded them. It also shows there exists a gap between young Hayek and old Hayek, which cannot be explained in terms of his view on monetary theories. It further shows that Friedman's argument for '100% reserve bank' was not based on his monetary theories. Differences between Hayek and Friedman despite their common political belief, Hayek's transition, gaps between theories and policy views found in Hayek and Friedman-this paper argues that these facts can be best explained by Kuhn's paradigm theory. This paper concludes that truthfulness of a thesis on the public sector's role in the monetary system is subject to relativism.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.478-481
• /
• 1997

A technique or the preparation of porous polyurethane vascular prostheses was investigated. Small-diameter vessels are not in general clinical use due to their limited long-term biocompatibility and low patency rates in experimental trial. These limits are mainly due to the failure of mechanical unction of the vascular grafts. This failure has been suggested to result partially from compliance mismatch. The long-term patency is considered to depend critically on the properties of the material and the fabrication process of the graft. So the control of pores is very important and main points to develop a available vascular grafts. Two-kind polymer sheets was compared. One was the porous PU-sheet made at room temperature by the solvent/non-solvent exchange. And the other was the porous PU-sheet which was fabricated by thermal phase transition and solvent-/non-solvent exchange using the thermal controller. The polymer sheets had a uniform pore size and pore occupation. According to the result of the above experiments, polyurethane solution was injected into a mold designed or U-type tube. The average pore size and pore occupation were easily changed by changing polyurethane concentration, freezing temperature, and methods. This technique can give a proper pore size ($10{\sim}45\;{\mu}m$) or tissue in growth, and suitable compliances or matching with arteries and veins. Besides, the fabrication of more complicated shaped vessels such as the U-type vascular grafts is easily controlled by using the fixed mold. this method might give a desired compliant graft or artificial implantation with the presently valid medical polymers.

• Childhood Kidney Diseases
• /
• v.7 no.1
• /
• pp.86-90
• /
• 2003

An 8-month-old male infant presented with persistent, gross, orange-colored crystals in his urine. His physical and neurological development was normal. Laboratory study showed hyperuricemia, hyperuricosuria and urate crystaluria. He was determined to have partial hypoxanthine-guanine phosphoribosyl transferase(HPRT) deficiency. The molecular genetic analysis revealed a missense mutation in the patient's HPRT gene. By sequencing the patient's cDNA, we identified an A-to-G transition at nucleotide 239, resulting in the replacement of Aspartate with Glycine at amino acid 80 in the HPRT. To our knowledge, this mutation has not previously been reported. Our patient is now being placed on allopurinol therapy, and has had no problem since. Partial HPRT deficiency has been known to cause recurrent acute renal failure without the phenotypic features of Lesch-Nyhan syndrome. Therefore, we think that early diagnosis and treatment are very crucial in preventing acute renal failure.

• Geomechanics and Engineering
• /
• v.11 no.1
• /
• pp.141-160
• /
• 2016

This study elucidates the uplift behaviors of the straight-sided and belled shafts. The field uplift load tests were carried out on 18 straight-sided and 15 belled shafts at the three collapsible loess sites under an arid environment on the Loess Plateau in Northwest China. Both the site conditions and the load tests were documented comprehensively. In general, the uplift load-displacement curves of the straight-sided and belled shafts approximately exhibited an initial linear, a curvilinear transition, and a final linear region, but did not provide a well defined peak or asymptotic value of the load, and therefore their uplift resistances should be interpreted from the load test results using an appropriate criterion. Nine representative uplift resistance interpretation criteria were used to define the "interpreted failure load" for each of the load tests, and all of these interpreted uplift resistances were normalized by the failure threshold, $T_{L2}$, obtained using the $L_1-L_2$ method. These load test data were compared statistically and graphically. For the straight-sided and belled shafts, the normalized uplift load-displacement curves were respectively established by the plots that related the mean interpreted uplift resistance ratio against the mean displacement at the corresponding interpreted criteria, and the comparisons of the normalized load-displacement curves were made. Specific recommendations for the designs of uplift belled and straight-sided shafts in the loess were given, in terms of both capacity and displacement.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.417-426
• /
• 2019

The purpose of this study is to analyze the success and failure of the movie made by the original game by comparing the box office environment of the movie made by the original game and to derive the necessary elements to make a good original movie. The specific analytical content studied the specific successes and failure factors of the remake of the game with , , and . Analyzes of the research show that the audience can be divided into game fan and non - game fans, and how to reflect the expectation on both sides of the movie is an important factor in making the movie. Also, games of different styles and genres from other themes can not be created in the same way as remixing movies, but flexible diversity and management are needed. Unconditional scenarios of games or game switching of movies can not be popular among the public, and it is very important to analyze specific target audiences.

• Journal of Technology Innovation
• /
• v.27 no.2
• /
• pp.1-36
• /
• 2019

In line with the international community's movement to reduce greenhouse gas emission, Korea implemented FIT(Feed in Tariff) in 2002 as part of its renewable energy development project. Although the policy had shifted to full-scale RPS(Renewable Portfolio Standards) in 2012, policymakers are still seeking changes due to policy ineffectiveness. While previous studies explain sudden policy changes through external factors, recent research sheds light on internal factors in the process of policy transition. The purpose of this study is to investigate the factors that are responsible for rapidly changing policies in latecomer nations. In order to find this, we look at the case of transition from the FIT to the RPS in Korea's expansion of renewable energy policy. As a result of the research, it is confirmed that the Top-Down decision making system of Korea and the external regulatory change cause rapid policy transition. By looking at these variables, we propose useful implications for policymakers to minimize the policy failure in future policy design and evolution.