• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.141-144
• /
• 2005

Rip-off failure and Debonding failure were commonly reported premature failure modes. The main reasons of premature failure in RC beams bonded with FRP were strengthening length and the reinforcement ratio. in this study, On the basis of premature failure mechanism in RC beams bonded with FRP, premature failure criteria were proposed. Also It was verified that Rip-off failure and Debonding failure occured according to premature failure criteria

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.101-106
• /
• 2011

The failure of cooling system in Superconducting Fault Current Limiter(SFCL) increases the impedance of superconducting device, and due to malfunction of inner switches the SFCL opens the distribution system inadvertently when required to do so. In this paper, the ground fault and short circuit fault were classified as active failure and the open circuit fault was passive failure. A reliability model of SFCL considers the passive failure as well as active failure, and in the case study the reliability indices of distribution system are evaluated. It is possible that the reliability evaluation excluded passive failure makes the customers reliability seem so worse than it really was. Therefore, the reliability models of SFCL must include the active failure and passive failure together to evaluate the reliability of distribution system connected SFCL.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.305-315
• /
• 2017

Purpose: The purpose of this research is to propose procedure and methodology for developing failure rate databook which is suitable for Korean operation environment. Methods: To this end, we investigate failure databooks used in foreign countries and study the procedure and methodology for collecting failure data, organizing the data, estimating failure rate and summarizing results. Results: We develop the procedure of development of failure databook, the items for data collection, database schema of part details and part summary and contents of failure databook by considering the application environment in Korea. Conclusion: The results of our research could be utilized for the development of Korean failure rate databook and research of reliability prediction model and could ultimately contribute to improve the accuracy of reliability prediction.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.245-253
• /
• 2007

Failure rate serves as a pivotal role in reliability study. Of all, the constant failure rate is the most popularly used in field exercises. In reality, however, the electrical and electronic parts' life is represented by not only the constant failure rate but the decreasing and/or increasing failure rates. Explicit consideration and incorporation of them into the model development may yield more desirable results. In this study, we built a reliability model for failure rates varying over time intervals and derived well known measures such as probability density function, reliability function, mean life, moments, and mission time. We then evaluated mean life with consideration of the first-year multiplier and compared the results those with constant failure rate. The results given in the study may provide a reference applying for practical decision making.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.36 no.4
• /
• pp.29-41
• /
• 2011

As industires are evolving into a more advanced type industrial system, service economy has been more emphasized. But with the expansion of the service economy, the failure of the service has also increased. Customers flee caused by the service failure leads to from simple problems like financial loss to serious problems like damaging corporate image. Therefore, if possible, the system providing defect-free service should be established. If this is not possible, preventive measures should be taken in order to minimize the failure. The study as a tool to prevent service failure presents the concepts "service error matrix." And to confirm whether this idea is practical or not, this study investigated the hotel, one of the leading service industries, about actually occurring service failure and applied to service error matrix suggested in this study. Finally service blueprint and Poka-yoke are completed in order to reduce service failure of Y hotel which was the object of the interview for this study.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.262-265
• /
• 2007

This paper is about the study on the failure mode identification of railway signaling embedded system thru which quantitative reliability and safety can be compared reciprocally. Frequency of each failure mode makes possible to compare the reliability of each system and frequency of dangerous failure is used as the measurement standards for system safety. Therefore, this paper provides both reliability-related failure mode and safety-related failure mode by modeling the railway signaling embedded system.

• Steel and Composite Structures
• /
• v.32 no.4
• /
• pp.423-441
• /
• 2019

This study aims to accurately predict the first ply failure loads of laminated composite hypar shell roofs with different boundary conditions. The geometrically nonlinear finite element method (FEM) is used to analyse different symmetric and anti-symmetric, cross and angle ply shells. The first ply failure loads are obtained through different well-established failure criteria including Puck's criterion along with the serviceability criterion of deflection. The close agreement of the published and present results for different validation problems proves the correctness of the finite element model used in the present study. The effects of edge conditions on first ply failure behavior are discussed critically from practical engineering point of view. Factor of safety values and failure zones are also reported to suggest design and non-destructive monitoring guidelines to practicing engineers. Apart from these, the present study indicates the rank wise relative performances of different shell options. The study establishes that the angle ply laminates in general perform better than the cross ply ones. Among the stacking sequences considered here, three layered symmetric angle ply laminates offer the highest first ply failure load. The probable failure zones on the different shell surfaces, identified in this paper, are the areas where non-destructive health monitoring may be restricted to. The contributions made through this paper are expected to serve as important design aids to engineers engaged in composite hypar shell design and construction.

• Knowledge Management Research
• /
• v.9 no.1
• /
• pp.61-76
• /
• 2008

The purpose of this study is to examine the effects of lifelong learners' learned helplessness and failure tolerance on academic achievement and job performance. The result of this empirical study exhibits that learned helplessness has negative effects on their academic achievement and job performance. Failure tolerance, however, has positive effects on their academic achievement and job performance. In addition, their academic achievement has mediated between learned helplessness and/or failure tolerance, and job performance. This study suggests that lifelong learners' positive response to failures is helpful for both learning and working performances.

• Structural Engineering and Mechanics
• /
• v.59 no.6
• /
• pp.1095-1120
• /
• 2016

This paper investigates the change of structural characteristics of steel cable-stayed bridges after cable failure. Cables, considered as the intermediate supports of cable-stayed bridges, can break or fail for several reasons, such as fire, direct vehicle clash accident, extreme weather conditions, and fatigue of cable or anchorage. Also, the replacement of cables can cause temporary disconnection. Because of the structural characteristics with various geometric nonlinearities of cable-stayed bridges, cable failure may cause significant change to the structural state and ultimate behavior. Until now, the characteristics of structural behavior after cable failure have rarely been studied. In this study, rational cable failure analysis is suggested to trace the new equilibrium with structural configuration after the cable failure. Also, the sequence of ultimate analysis for the structure that suffers cable failure is suggested, to study the change of ultimate behavior and load carrying capacity under specific live load conditions. Using these analysis methods, the statical behavior after individual cable failure is studied based on the change of structural configuration, and distribution of internal forces. Also, the change of the ultimate behavior and load carrying capacity under specific live load conditions is investigated, using the proposed analysis method. According to the study, significant change of the statical behavior and ultimate capacity occurs although just one cable fails.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.18 no.2
• /
• pp.116-122
• /
• 2020

Acute respiratory failure is an important risk factor for mortality in patients with acute pesticide poisoning. Therefore, it is necessary to investigate the risk factors to predict respiratory failure in these patients. This study retrospectively investigated the clinical features of respiratory failure among patients with acute pesticide poisoning requiring mechanical ventilation. This study included patients who were admitted with intentional poisoning by pesticide ingestion from January 2017 to December 2019. Paraquat intoxication was excluded. Among 469 patients with acute pesticide poisoning, 398 patients were enrolled in this study. The respiratory failure rate was 30.4%. The rate of respiratory failure according to the type of pesticide was carbamate (75.0%), organophosphate (52.6%), glufosinate (52.1%), glyphosate (23%), pyrethroid (8.9%), and others (17%). The mortality was 25.6% in the respiratory failure group. The risk factors for respiratory failure were old age, low body mass index, and ingestion of more than 300 mL. In conclusion, respiratory failure is a risk factor for mortality in pesticide poisoning. Old age, low body mass index, and ingestion of more than 300 mL are the risk factors for predicting respiratory failure.