• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.9-12
• /
• 2008

반강접합은 핀접합의 단점을 보완하고 강접합의 장점을 수용할 수 있는 중간 형태이다. 현재 국내에서 핀접합에 대한 연구는 활성화 되어있으나 반강접합에 대한 연구는 많지 않기 때문에 본 연구에서는 3가지 형태의 실험체를 제작하여 성능을 입증하려 했다. 실험체는 강접합 HI-R, 반강접합 HI-S, 핀접합 HI-P등 총 3개이다. 실험결과 HI-R은 접합부 전단파괴, HI-S는 고정단 상부 휨파괴, HI-P는 경사계단 슬래브 하부 휨파괴로 나타났고 최대내력은 각각 51.74, 51.4, 24.63kN으로 측정되었고, 강성은 1.58, 1.19, 0.37을 나타냈다. 항복강도는 각각 44.5, 47.3, 24kN을 보유하고, 연성비는 3.31, 2.32, 1.54로 나타냈고, 사용하중 작용 시의 처짐은 KBC기준에 의거하여 HI-P실험체가 기준을 초과하는 것으로 나타났다. 철근 변형률분포로 보아 HI-S는 초기에 HI-R과 유사한 거동을 보이나 항복이후 접합부 내부요소들의 응력분담으로 핀접합보다는 우수한 성능을 보유한 반강접 접합부로 판단할 수 있었다.

• 터널과지하공간
• /
• 제24권1호
• /
• pp.67-80
• /
• 2014

본 연구에서는 임계하균열성장 변수를 구하기 위해 제안된 Wilkins의 시험법을 압열인장시험과 결합하여 화강암의 인장강도, Mode I 파괴인성과 임계하균열성장지수를 동시에 구하였으며 이를 사용하여 암석의 장기거동을 평가하였다. 또한 내부압력을 받는 압축공기저장(CAES) 공동에 대한 장기안정성을 수치해석코드인 FRACOD를 사용하여 해석하였다. 시험 결과 화강암의 임계하균열성장지수(n)는 29.39로 결정되었으며 5 ~ 6 MPa의 내압은 저장공동의 장기안정성에 큰 영향을 미치지 않는 것으로 나타났다. 또한 시험 과정에서 측정한 미소파괴음을 분석한 결과 암석내의 미소균열 생성 및 전파에 따른 암석의 손상을 정량적으로 기술할 수 있었다. 만약, 실내와 동일한 조건으로 현장에서 AE 모니터링을 수행할 경우 AE 모니터링을 통해서 하중을 받는 암석의 현재 상태를 정량적으로 평가하는 것이 가능할 것으로 판단된다.

• Earthquakes and Structures
• /
• 제5권2호
• /
• pp.143-160
• /
• 2013

This paper presents the results of an experimental program concerning the efficiency of a specific strengthening technique which utilizes a small steel link element connected to the R/C frame through bracing elements. Brittle types of failure, especially at the connections between steel and concrete elements, can be avoided by appropriate design of the local details. Five single storey one bay R/C frames scaled 1:3 were constructed according to older codes with substandard details. The first one was a typical bare reference frame. The other four were identical to the first one, strengthened by steel bracing elements. The behavior of the strengthened frames is described with respect to the reference bare frame. The concrete frames were constructed according to older code provisions by the use of smooth steel bars, low strength concrete, sparsely spaced stirrups and substandard details. The strengthening scheme aimed to the increase of both strength and deformation capacity of the original R/C frame. The inelastic deformations are purposely concentrated to a short steel link element connecting the steel bracing to the R/C frame. The results show that the steel link element can increase considerably the strength and the energy dissipation capacity of the frame.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.631-639
• /
• 2017

This study experimentally investigated the flexural capacity of a concrete beam reinforced with a newly developed GFRP bar that overcomes the lower modulus of elasticity and bond strength compared to a steel bar. The GFRP bar was fabricated by thermosetting a braided pultrusion process to form the outer fiber ribs. The mechanical properties of the modulus of elasticity and bond strength were enhanced compared with those of commercial GFRP bars. In the four-point bending test results, all specimens failed according to the intended failure mode due to flexural design in compliance with ACI 440.1R-15. The effects of the reinforcement ratio and concrete compressive strength were investigated. Equations from the code were used to predict the deflection, and they overestimated the deflection compared with the experimental results. A modified model using two coefficients was developed to provide much better predictive ability, even when the effective moment of inertia was less than the theoretical $I_{cr}$. The deformability of the test beams satisfied the specified value of 4.0 in compliance with CSA S6-10. A modified effective moment of inertia with two correction factors was proposed and it could provide much better predictability in prediction even at the effective moment of inertia less than that of theoretical cracked moment of inertia.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.971-983
• /
• 2015

To promote greater acceptance and use of composite RCS systems, a two-bay two-story frame specimen with improved composite RCS joint details was tested in the laboratory under reversed cyclic loading. The test revealed superior seismic performance with stable load versus story drift response and excellent deformation capacity for an inter-story drift ratio up to 1/25. It was found that the failure process of the frame meets the strong-column weak-beam criterion. Furthermore, cracking inter-story drift ratio and ultimate inter-story drift ratio both satisfy the limitation prescribed by the design code. Additionally, inter-story drift ratios at yielding and peak load stage provide reference data for Performance-Based Seismic Design (PBSD) approaches for composite RCS frames. An advantage over conventional reinforced concrete and steel moment frame systems is that the displacement ductility coefficient of the RCS frame system is much larger. To conclude, the test results prove that composite RCS frame systems perform satisfactorily under simulated earthquake action, which further validates the reliability of this innovative system. Based on the test result, some suggestions are presented for the design of composite RCS frame systems.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.55-60
• /
• 2017

There are many Industry Code and Standard (ICS) for Structural Integrity Assessment (SIA) on welded structure with defect. The general ICSs, such as R6, BS 7910 and API 579-1/ASME FFS-1, provide equations to determine the upper bound residual stress profiles based on collections from many literatures. However, these residual stress profiles used in the SIA cause the conservative design for welded structures. In this study, the structural integrity assessment for girth weld in pipeline has been conducted based on fracture mechanics. In addition, thermo-elastic plastic FE analysis was performed for evaluating the residual stress of girth weld in pipeline. The weight function solution is used to determine the stress intensity factor using the residual stress profile obtained by the FE analysis. This approach can account for redistribution and relaxation of residual stress as the defects grow. In order to the evaluate quantitative comparison between BS 7910 and weight function solution, structural integrity assessment determining allowable crack size on cracked pipe was performed with failure assessment diagram.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2010

RCCS is a passive safety-related system that removes the decay heat of VHTR when normal decay heat removal systems are in failure. Understanding thermo-hydraulics of RCCS is important to design a safer VHTR. RCCS consists of 292 cooling panels, which are placed in the reactor cavity. The layout of RCCS gives an idea that, for CFD simulations, cooling panels can be assumed to be one annulus tube. This assumption can reduce significantly the computational time, especially for the unsteady simulation. To simulate RCCS in an axisymmetric manner, three models were suggested and compared. Each model has (1) the same outer radius, (2) the same cross-sectional area (3) the same pressure drop, respectively, as the RCCS cooling panels. The steady-state simulation was conducted with these three models and the DO radiation model. It is found that over 90% of the heat from the outer wall of the reactor pressure vessel is transported to the RCCS by radiative heat transfer. The simulation with the third model, which has the same pressure drop as the design, estimates the closest wall temperature profiles to a thermo-hydraulic code, GAMMA+, result.

• 에너지공학
• /
• 제21권1호
• /
• pp.75-80
• /
• 2012

본 논문은 원자력발전소의 대형탱크 또는 배관파단에 따른 격실의 침수분석을 수행함에 있어 최적평가방법을 개발하여 원전에 실제로 적용하는 방법에 관한 논문을 작성하는데 목적이 있다. 주급수관파단사고 분석을 위해 RETRAN 전산코드를 사용하였다. 유출수 질량유량을 계산하는데 있어서 주급수제어밸브가 계통설계에 의거 원자로정지 후 5.0초 만에 닫히는 것으로 모델링하여 분석하였다. 출력 70% 운전시 방출유량이 가장 높은 것으로 나타났다. 방출 질량유량을 가지고 침수위를 계산한 결과 주급수관 격실의 최대 침수위는 1.43m로서 이는 안전성기기가 설치된 위치보다 낮아 원전의 안전정지에 미치는 영향이 없는 것으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1240-1243
• /
• 2005

The wrinkling in the flange and wall of a part is a predominant failure mode in stamping of sheet metal parts. In many cases this wrinkling may be eliminated by appropriate control of the blank holding force(BHF), but BHF affects the draw depth. Gotoh had studied the wrinkles under $20{\mu}$ in height. In general, the height of wrinkles could be limited under $200{\mu}$ practically. Therefore small BHF can be allowed so that the depth of drawing could be increased. This paper represents the variation of the wrinkles of flange in the part of cup drawing by using aluminium alloy A1050 and A5052. This simulation is used by the explicit finite elements code $PAM-STAMP^{TM}$. The computed results are compared with the experimental results to show the validity of the analysis.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.50-58
• /
• 2001

Modern day networks are increasingly moving towards peer to peer architecture where routing tasks will not be limited to some dedicated routers, but instead all computers in a network will take part in some routing task. Since there are no specialized routers, each node performs some routing tasks and information passes from one neighbouring node to another, not in the form of dumb data, but as intelligent virtual agents or active code that performs some tasks by executing at intermediate nodes in its itinerary. The mobile agents can run, and they are free to d other tasks as the agent will take care of the routing tasks. The mobile agents because of their inherent 'intelligence'are better able to execute complex routing tasks and handle unexpected situations as compared to traditional routing techniques. In a modern day dynamic network users get connected frequently, change neighbours and disconnect at a rapid pace. There can be unexpected link failure as well. The mobile agent based routing system should be able to react to these situations in a fact and efficient manner so that information regarding change in topology propagates quickly and at the same time the network should not get burdened with traffic. We intend to build such a system.