• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.501-506
• /
• 1993

The purpose of this study was to observe the longevity of amalgam and composite resin fillings in Korea. The number of placement of restorations was 760 amalgams and 415 composite resins. The amalgam restorations inserted because of primary caries were 61 % and replacement of amalgam restorations were 39%, and composite restorations inserted because of primary caries were 62 % and replacement of composite restorations were 38 %. The median longevity of failed amalgam restorations was 3 years and the madian longevity of failed composite restorations was 2 years. The main reason of replacement of amalgam and composite resin restorations was secondary caries.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.131-140
• /
• 2005

Fault-tolerant gait generation of a hexapod robot with crab walking is proposed. The considered fault is a locked joint failure, which prevents a joint of a leg from moving and makes it locked in a known position. Due to the reduced workspace of a failed leg, fault-tolerant crab walking has a limitation in the range of heading direction. In this paper, an accessible range of the crab angle is derived for a given configuration of the failed leg and, based on the principles of fault-tolerant gait planning, periodic crab gaits are proposed in which a hexapod robot realizes crab walking after a locked joint failure, having a reasonable stride length and stability margin. The proposed crab walking is then applied to path planning on uneven terrain with positive obstacles. i.e., protruded obstacles which legged robots cannot cross over but have to take a roundabout route to avoid. The robot trajectory should be generated such that the crab angle does not exceed the restricted range caused by a locked joint failure.

• 대한전자공학회논문지
• /
• 제27권9호
• /
• pp.1351-1363
• /
• 1990

In this paper, a reliable control system structured with dual CPU modules and dual I/O modules is implemented as a means of achieving a highly reliable fault tolerant control system. For this, faults in the system modules are first examined, and a fault detection technique consisting of self diagnostic, comparison process, and exception processing is applied. Self diagnostic is used to locate which components in the modules have been failed, while comparison process is to cmpare control outputs computed by both CPU modules and protect the plant from malfunction by blocking failed control outputsin advance. Finally exception processing is used to determine the faults that are not detected immediately by the self diagnostic and comparison process, e.g. bus error processing when acknowledge signal for data transfer is not activeted in the I/O modules. Also reliability analysis is conducted for the discrete time Markov model with dual structure. It is shown quantitatively that the reliability is improved in the control system with dual structure in comparison with a system with single module structure.

• 한국CDE학회논문집
• /
• 제2권2호
• /
• pp.111-121
• /
• 1997

This study intends to develop a fixture planning module as a part of the planning system for cutting. The fixture module uses machine learning method to reuse previous failure results so that the system can reduce the repeated failures. Machine learning is one of efforts to incorporate human reasoning ability into a computerized system. A human expert designs better than a novice does because he has a wide experience in a specific area. This study implements the machine learning algorithm to have a wide experience in the fixture planning area as a human expert does. When the fixture planner finds a setup failure for the suggested operations by a process planner, it makes the process planner store its attributes and other information for the failed setup. Then the process planner applies the learned knowledge when it meets a similar case so that the planner can reduce possibility of setup failure. Also the system can teach a novice user by showing a failed setup with a modified setup.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.103-111
• /
• 2002

The objective of this study is to collect and classify bridge failures that occurred in domestic from 1974 through 2001 and to draw the engineering informations by analyzing the principal causes and the trends of the bridge failures. Total 45 failures of bridge were obtained and analyzed based on the factors such as time of failures, modes of failures, classification of materials of failed elements, types of failed elements, distribution of failure cases with respect to the highway grades. The critical problems of bridge failures are associated with the construction deficiencies, external causes, maintenance deficiencies, and design deficiencies. Since the study of failures in bridges would enhance the design and construction of safe bridges in the future, it would be needed to create data bases at the national level and to alter the related codes with identifying potential deficiencies from past failures data.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.115-123
• /
• 2004

Replacement problems can be classed as either deterministic of stochastic. Deterministic problems are those in which the timing and the outcome of the replacement action are assumed to be known with certainty. Before proceeding with development of replacement models it is important to note that preventive replacement actions, that is, ones taken before equipment reaches a failed state, require two necessary conditions: (1) The total cost of the replacement must be greater after failure than before. (2) The failure rate of the equipment must be increasing. Equipment is subject to failure. On failure, one of two possible actions can be taken : repair or complete replacement of the failed equipment. In this paper, we proposed optimal overhaul, repair, replacement maintenance model with two-state.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.357-364
• /
• 1997

After the buyer purchases the product, the seller's role does not end. If the product fails to function properly before the end of the warranty period, the seller is responsible for its repair or replacement under the seller's warranty policy. There are two common types of warranty policies: the free replacement warranty and the rebate warranty. Under the free replacement warranty policy, replacement or repairs during the warranty period are provided by the seller free of charge to the buyer. Under the rebate warranty policy, a failed item is replaced by a new one or is repaired at a cost to the age of the failed item. The rebate warranty is most often used for items such as a battery or an automobile tire which wear out and must be replaced at failure. This paper proposes a easy way of estimating the warranty cost under the free replacement warranty policy assuming an exponential product failure function on repairable products.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.177-180
• /
• 2006

Experimental study has been performed in order to evaluate the effects of steel reinforcement ratio on the flexural behavior of RC beams strengthened with CFRP sheets. The steel reinforcement ratio of $0.78%({\rho}_s/{\rho}_b=24%)$ is selected to have balance failure when control RC beams were strengthened with 1 ply CFRP sheet. Total 6 half-scale specimens were manufactured including each unstrengthened specimens, which have 3 different reinforcement ratios. The specimens strengthened with CFRP sheet consist of under- or over-reinforced beams for the balanced failure condition. Moreover, the behavior of un strengthened or strengthened beams were compared to evaluate flexural performance. The results of this study show that the over-reinforced specimens were failed by concrete crushing prior to CFRP sheet failure by debonding or rupture. On the contrary, the under-reinforced specimen were failed by rupture of CFRP sheet.

• Journal of the Korean Data and Information Science Society
• /
• 제18권3호
• /
• pp.637-644
• /
• 2007

We consider a life testing experiment in which several two component shared parallel system are put on test, and the test is terminated at a pre-designed experiment. The bivariate data obtained from such a system level life testing can be classified into three cases: (1) the case of failed two components with known failure times, (2) the case of one censored component and the other failed component of which the failure time might be known or unknown, (3) the case of censored two components. In this paper, the maximum likelihood estimators of parameters for Block and Basu bivariate exponential model under above censoring scheme are obtained and the results of comparative studies are presented.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권2호
• /
• pp.125-128
• /
• 2018

In cases of a difficult intubation where numerous intubation methods, including laryngoscopy, have failed, yet oral intubation is still necessary, the method of tube exchange after fiberoptic nasal intubation may be attempted. Fiberoptic nasal intubation allows intubation to be performed relatively easily when the laryngeal view grade is poor. We report a case in which our attempt at oral intubation for total maxillectomy with laryngoscopy and fiberoptic oral intubation had failed due to an unexpected difficult airway; subsequently, we successfully completed the surgery by performing fiberoptic nasal intubation to secure the airway, followed by using a tube exchanger to exchange to an oral endotracheal tube.