• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.151-159
• /
• 2016

This paper proposes a ceramic heating element-based tankless instant electric water heater for hand/face washing that does not require a lot of hot water. The heating module, which heats the input water and outputs hot water, operates the ceramic heating element detecting input water using a flow sensor. Inside of the heating module is designed to form one flow path in order to get almost $15^{\circ}C$ increased heated water compared to the input water temperature within 2 second after 1.5 liter per minute water supply. The design validity is verified using a heat flow analysis of the water flow and temperature variations inside of the heating module also. Based on the design data, the heating module is constructed including a single rod-type ceramic heating element. After that, a prototype system having temperature setting function by three steps were constructed. The prototype system is connected to a 1.5 liter per minute water supply line, and the water output temperature and time measurement experiments confirmed that the proposed system output the heated water increased by $18.3^{\circ}C$ in case of third step setting within 2 second after water supply. And standby power is under 1 W and peak power does not exceed the permissible range for the general house usage. Several performance results verify that the proposed tankless instant electric water heater is applicable for the washstand of the house, highway rest area and factory so on as winter-time hand/face washing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.262-267
• /
• 2017

The number of shops needed for the fabrication of a sphere type cargo tank for an LNG carrier is proportional to the size of the tank to be constructed. Due to the limitations of facility investment, it is difficult to fabricate various size tanks with a perfectly spherical shape in the (factory). An efficient method of increasing the capacity of the cargo tank is to extend the conventional sphere type LNG tank vertically by inserting a cylindrical shell structure. In this study, equations for the dynamic pressure distribution due to horizontal acceleration are derived for a sphere type LNG tank with central extension. The derived equations can be easily applied to the design and structural assessment of a sphere type LNG tank with central extension. Furthermore, the results of this study can be combined with the static design loads previously reported by Shin & Ko [9], in order to establish a simplified analysis method which enables a precise initial estimate to be obtained, thereby obviating the need for a time consuming finite element analysis.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.809-820
• /
• 2008

A new modified full scale double tee slabs with the length of nib plate - 1,500 mm were suggested, designed, and experimentally evaluated up to the loading of flexural failure. This slabs were composed of the tee section which was same to original PCI double tee and the plate section which was modified in a new shape, and the prestressing force was applied at the bottom of tee section only. This specimens were made from the domestic precast factory. The safety and serviceability of the modified nib plate with the dapped ends were evaluated up to the ultimate flexural strength of tee section. As the experimental loading increased, the flexural crackings developed first in the bottom of the slab and they changed to the increased flexural shear and inclined shear crackings in the nib and dapped portion of the double tees. The suggested modified double tee slabs failed in ductile above the design loading with many evenly distributed flexural crackings. The thickness of nib plate - 250 mm does not show any cracking under the service loading and show several minor flexural cracking up to the ultimate state of tee portion. The proposed specimens were satisfied with the strength and ductility requirements in the design code provisions in the tests. Additional experimental tests are required to reduce the depth and tensile reinforcement of nib plate concrete for the practical use of this system effectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.608-614
• /
• 2018

In addition to the diffusion of ICT technology, various protocols of short range wireless communication technology are being applied for efficient information operation. However, due to limitations of short-range wireless communication, communication is not smooth in places where frequency environment is poor, such as frequency confusion and warehouse type factory. When an alternative is needed. The development of LED technology and expansion of infrastructure through LED based visible light communication is attracting attention as an alternative and spreading the usage in wide range now a days. In addition, the infrastructure has been expanded with solar panels in response to the development of smarthome built-in with renewable energy. In this situation, visible light communication using PD has been limitedly applied in a near environment where the receiving angle of the PD and the ambient light ensure the LoS and the influence of the ambient light is small. In order to solve this problem, we have implemented visible light communication using LED lighting with large current infrastructure and solar panel with large receiving area, and proposed a circuit for restoring accurate data even in ambient light. Through this study results, it is expected that visible light communication can be more widely used and this result used as the base data for visible light communication research using the solar panel as the receiver.

• Korea Science and Art Forum
• /
• v.37 no.3
• /
• pp.365-376
• /
• 2019

Now, our urban space is composed of all kinds of sculptures that lost its individual charm in trend flows and street furniture standardized by the integrated design of standardized franchises and similar architectures per each region and autonomous districts. This study was to introduce the concept called the 'community furniture' in the urban environment that there is no an identity of the regional culture and a sense of place because of the mostly similar street environment. The purpose of this study is to propose the concept called the 'community furniture' referred to as public facilities that imply specific identities of some regions that have became the community art expanded into necessary facilities of urban composition as bus shelter's universal convenience and functionality have been preferentially handled and its regional identities are reflected. For doing this, this study fulfilled application alternatives of community furniture design's basic principles after examining the storytelling process of local cultural heritages and analyzing domestic and foreign cases of bus shelters. Results of this study are as follows. First, convergent synergy effects in information and culture and art sectors could be expected as bus shelters visually deliver storytelling factors that imply locally related images. Second, space and place's characteristics and sustainable design concepts embody local characteristics. They can suggest directions for vitalizing urban environment designs by being in harmony with surrounding environments. Third, it is expected that realizing distinctive places is possible as bus shelters with local communities' aesthetic consciousness and regionality are composed of new street spaces.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.21-30
• /
• 2021

The existing construction industry is classified into industries with low productivity compared to other industries. In order to solve the decline in productivity in the construction industry, the world is focusing on off-site construction (OSC), which is about 40% more productive than existing construction methods. This high productivity is possible because the three stages of production, transport to the site, and site assembly are consistently maintained in a continuous flow. This study conducted a functional survey through literature review, preliminary field survey, questionnaire, and expert interview. The surveyed function were classified into five categories: convenience, flexibility, manageability, communication, and safety, and the functional characteristics of flexibility, manageability, and communication were high. Because of the change according to the construction progress, the production schedule of the factory, and the variety of transportation time required. Finally, A functional block diagram was developed based on the 15 functions corresponding with an average score of 4 or more in the surveyed function score result. If the OSC transport system is established through this study, It can contribute to a successful construction OSC project and increase productivity.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.60
• /
• pp.47-77
• /
• 2013

The way for seller to procure the goods for selling is to produce the goods at his own factory and to buy the manufactured goods from the other company. In order to produce the goods for selling the seller have to obtain the resource from the domestic company or overseas. In the middle of producing the goods to sell, seller may breach the right of a third party based on intellectual property rights. That is to say, seller may use the machine that has not itself been patented and use a process which has been patented by a third party. Seller may manufacture the goods which themselves are subject to the third party industrial property rights. Nowadays it is stressed the importance of intellectual property rights such as a patent, brand, and design. These factors consist of the core elements of the competitiveness of the goods. Many embedded software have been used in the various sector. So the disputes regarding to the intellectual property rights is gradually increasing in number. Article 42 of CISG defines the seller's delivery obligations and liabilities in respect to third party intellectual property rights and claims. It contains a special rule for this similar kind of defective in title, which tries to provide an proper solution to the complex problems caused by such rights and claims in international transactions. When seller will apply this clause to the business fields, there are several points to which seller should give attention. First, Intellectual property is general terms in intangible property rights, encompassing both copyright and industrial property. Which matter fall within the scope of intellectual property? The scope of intellectual property can be inferred from the relevant international conventions, which are based on broad international consensus. Second, Article 42 of CISG governs the relationship between the seller and the buyer, that is to say, questions of who has to bear the risk of third party intellectual property rights. The existence of such intellectual property rights, the remedies available and the question of acquiring goods free of an encumbrances in good faith are outside the scope of the CISG. The governing law regarding to the abovementioned matters is needed.

• Industry Promotion Research
• /
• v.5 no.4
• /
• pp.1-13
• /
• 2020

Since the 4th industrial revolution was thrown into the world at the Davos World Economic Forum in January 2016, the world has been undergoing major social and economic changes. In this study, the direction of quality management in the 4th industrial revolution era was examined. First, in all the major countries the industrial structural changes and smart business models were confirmed due to the convergence of new ICT such as IoT, robotics, 3D printing, big data, and AI with the existing technologies and industries. Second, we found that although the core technology level of the 4th industrial revolution in Korea is not as good as that of advanced countries, we have been working on expanding smart production methods and creating new industries by utilizing new ICT. Finally, it was confirmed that quality management is a real-time implementation of new ICT that reflects the needs of the market in real time based on big data from the planning and design stage of products or services.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.613-620
• /
• 2020

The research study is focuses on a form of all-bolted joint with the external ring stiffening plate in the prefabricated steel structure. The components are bolted at site after being fabricated in the factory. Six specimens were tested under cyclic loading, and the effects of column axial compression ratio, concrete-filled column, beam flange sub plate, beam web angle cleats, and spliced column on the failure mode, hysteretic behavior and ductility of the joints were analyzed. The results shown that the proposed all-bolted joint with external ring stiffening plate performed high bearing capability, stable inflexibility degradation, high ductility and plump hysteretic curve. The primary failure modes were bucking at beam end, cracking at the variable section of the external ring stiffening plate, and finally welds fracturing between external ring stiffening plate and column wall. The bearing capability of the joints reduced with the axial compression ratio increased. The use of concrete-filled steel tube column can increase the bearing capability of joints. The existence of the beam flange sub plate, and beam web angle cleat improves the energy dissipation, ductility, bearing capacity and original rigidity of the joint, but also increase the stress concentration at the variable section of the external reinforcing ring plate. The proposed joints with spliced column also performed desirable integrity, large bearing capacity, initial stiffness and energy dissipation capacity for engineering application by reasonable design.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.15-22
• /
• 2017

This paper analyzes vulnerability of each service protocol used in ICT convergence industry, smart factory, smart grid, smart home, smart traffic, smart health care, and suggests technologies that can overcome security vulnerabilities. In addition, we design a service-oriented protocol security framework that allows us to quickly and easily develop security functions in an open environment by defining a security element common to protocols and designing a security module for each protocol layer including the corresponding elements. Service protocol independent security module and specialized security module, it will be possible to develop flexible and fast security system in ICT convergence industry where various protocols are used. The overall security level of the ICT service network can be improved by installing the necessary security modules in the operating system, and the productivity can be improved in the industrial security field by reusing each security module.