• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.145-150
• /
• 2003

The present study aims to optimize the performance of the Two-Stage Gas Gun by using the experimentally obtained data. RSM(Response Surface Method) was adopted in the optimization process to find the operating parameter than can maximize the projectile speed with the minimum number of tests. To decide the test points which results can consist of the response surface, 3$^{k}$ full factorial method was used, and the design variables were chosen with piston mass and 2$^{nd}$ driver fill pressure. The response surface was composed by nine test results and consequently the optimization was done with GENOCOP III, inherently GA code, in order to seek the optimal test point. The optimal test condition from the response surface was verified by the experiment. Results showed that the optimization process with response surface can successfully predict the test results fairly well. This study shows the possibility of performance optimization for the experimental facilities using numerical optimization algorithm.

• 대한가정학회지
• /
• 제48권10호
• /
• pp.121-132
• /
• 2010

This study was intended to identify the persuasion effects of online cosmetic advertising according to scarcity message type and product type. For the experiment, 4 stimuli were developed as experimental stimuli for the 2(scarcity message type: quantity scarcity message vs distinctiveness scarcity message) X 2(product type: hedonic product vs utilitarian product) factorial design. Participants were 160 students, and they allocated 40 students in each group. They responded a questionnaire. The results were as follows. First, distinctiveness scarcity message showed more effective than quantity scarcity message in advertising attitude, product attitude, brand attitude, and purchase intention. Second, hedonic product showed more effective than utilitarian product in advertising attitude, product attitude, brand attitude, advertising attention, click-through intention, and purchase intention. Third, there was interaction effect according to scarcity message type and product type on the aspect of advertising attitude, advertisement attention, and click-through intention.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.335-337
• /
• 2009

A scanning electron microscope(SEM) is a system that visualizes complex surface features. The resolution of SEM is affected by each of equipment components. In this study, we examined the effects of the four factors including the beam current, magnification, voltage and working distance. A statistical analysis was conducted to investigate the main and interaction effects. For a systematic characterization, a $2^4$ full factorial experiment was conducted. The $R^2$ of constructed statistical model was 88.9%. The main effect revealed that the current and working distance are dominant factors. Of the interactions, those between the current and voltage yielded the highest interaction. 3D plots generated from the model were used to explore various parameter effects.

• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.118-127
• /
• 1997

With the trend towards welding automation and robotization, mathematical models for studying the influence of various variables on the weld bead geometry in gas metal arc (GMA) welding process are required. Partial penetration, single-pass bead-on-plate welds using the GMA welding process were fabricated in 12mm mild steel plates employed four different process variables. Experimental results has been designed to investigate the analytical and empirical formulae, and develop mathematical equations for understanding the relationship between process variables and weld bead geometry. The relationships can be usefully employed not only for open loop process control, but also for adaptive control provided that dynamic sensing of process output is performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.108-110
• /
• 2006

A prediction model of charge concentration of silicon nitride (SiN) thin films was constructed by using neural network and genetic algorithm. SIN films were deposited by plasma enhanced chemical vapor deposition and the deposition process was characterized by means of $2^{6-1}$ fractional factorial experiment. Effect of five training factors on the model prediction performance was optimized by using genetic algorithm. This was examined as a function of the learring rate. The root mean squared error of optimized model was 0.975, which is much smaller than statistical regression model by about 45%. The constructed model can facilitate a Qualitative analysis of parameter effects on the charge concentration.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권3호
• /
• pp.117-130
• /
• 2014

This paper presents a study on the influence of different thermo-mechanical processing (TMP) parameters on some required properties such as micro-hardness and Young's modulus of a novel near ${\beta}$ alloy Ti-20.6Nb-13.6Zr-0.5V (TNZV). The TMP scheme comprises of hot working above and below ${\beta}$ phase, solutionizing treatment above and below ${\beta}$ phase coupled with different cooling rates. Factorial design of experiment is used to systematically collect data for micro-hardness and Young's modulus. Validity of assumptions related to the collected data is checked through several diagnostic tests. The analysis of variance (ANOVA) is used to determine the significance of the main and interaction effects. Finally, optimization of the TMP process parameters is also done to achieve optimum values of the micro-hardness and Young's modulus.

• 한국조경학회지
• /
• 제21권1호
• /
• pp.51-61
• /
• 1993

Seeding treatment was used for 2 years at an artificial bare ground for selecting tree species suitable for forest-floor revegetation. 2 ${\times}$2${\times}$2 factorial experiment was used with a randomized complete block design for 19 native tree species and results were summarized as follows; 1. Native species suitable for restoration of bareland under 75% shading in central part of Korea were Styrax japonica, Styrax obassia, Smilax china, Callicarpa japonica, Stephanandra incisa, Viburnum dilatatum for. pilosulm, Magnolia sieboldii, Cornus kousa, Celastrus orbiculata, etc.. Especially, Magnolia sieboldii, Stephanandra incisa and Stryrax obassia were tolerant for forest-floor with hardened woil surface and Callicarpa japonica, Viburnum dilatatum for. pilosulum, Euonymus sieboldianus and Philadelphus schrenkii were suitable for softened soil surface with straw-mat mulching. 2. It is necessary to break seed dormancy to accelerate germination in case of Styrax obassia, Styrax japonica, Viburnum dilatatum for. pilosulum, Smilax china and Stephanandra incisa.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.159-167
• /
• 2003

In this paper, a two-dimensional multibody DADS model of a moving walk is developed to improve the ride quality of a moving walk system. The proposed DADS model is able to estimate the longitudinal acceleration of moving walk system, which is the more sensitive and important than other accelerations. To show the validity of the developed model, the longitudinal accelerations of pallet obtained from the computer simulations are compared to the experimental data in frequency domain. Then, the factorial design technique is applied to determine the main design factor and to improve the ride quality. The change of the spring compression in the lower part of the tension generating system improved the ride quality of the moving walk system.

• 품질경영학회지
• /
• 제17권1호
• /
• pp.35-47
• /
• 1989

This paper is concerned with a development and evaluation of heuristic algorithms for the n-job, M-stage flowshop with sequence dependent setup times. Three heuristic algorithms, CAIDAN, DANNEN and PETROV, are proposed. The makespan is taken as a performance measure for the algorithms. The experiment for each algorithm is designed for a $4{\times}3{\times}3$ factorial design with 360 observations. The experimental factors are PS (ratio of processing times to setup times), M (number of machines), and N (number of jobs). The makespan of the proposed heuristic algorithms is compared with the optimal makespan obtained by the complete enumeration method. The result of comparision of performance measure is called a relative error. The mean relative errors of CAIDAN, DANNEN and PETROV algorithms are 4.488%. 6.712% and 7.282%, respectively. The computational results are analysed using SPSS. The experimental results show that the three factors are statistically signiticant at 5% level.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.677-682
• /
• 2011

본 연구에서는 유압브레이커의 시뮬레이션 결과와 실제 실험 결과의 비교를 통해 시뮬레이션의 타당성을 검증하였다. 유압브레이커의 성능 향상을 위하여 비교적 설계 변경이 용이한 부품의 제원을 설계인자로 선정하였고, 요인시험과 회귀분석을 이용하여 각각의 설계 인자가 유압브레이커의 성능에 미치는 영향을 규명하였다. 본 연구의 결과로 기존 유압브레이커의 성능을 최대화 시킬 수 있는 방안을 제시하였다.