• 품질경영학회지
• /
• 제49권1호
• /
• pp.31-45
• /
• 2021

Purpose: A noncentral composite design method is to be developed to explore farther region for the first factorial design. A general guideline for sequential experimentation is provided. Methods: (1) A non-overlapping noncentral composite design (NNCD) is developed, in which the second factorial design shares one design point that indicates the best response value in the first factorial design. (2) Four composite designs are compared in terms of the four design evaluation criteria, which are D-, A, G, and I-optimality. (3) A follow-up design strategy is suggested based on the interaction effect, direction of improvement, number of factors. Results: (1) NNCD and model building method are presented, which is useful for exploring farther region from first factorial design block. (2) The performances of the four composite designs are compared. (3) A follow-up design strategy is suggested. Conclusion: (1) NNCD will be useful to explore farther region for the first factorial design. (2) A follow-up design strategy can be beneficial to the experimental practitioners for product and process design and improvement.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.5-10
• /
• 2018

In order to employ factorial design on electronically-controlled diesel engine, effects of 5 factors on specific fuel consumption, nitrogen oxides and carbon monoxide were examined by fractional and full factorial design in this research. There were different results between fractional and full factorial design, then effect of variables as ambient condition and measurement of fuel consumption were confirmed. It was shown that ambient condition affected uniformly trend of nitrogen oxides and carbon monoxide. However, both ambient condition and measurement of fuel consumption had nothing to do with trend of specific fuel consumption and therefore it must be careful to employ factorial design on specific fuel consumption as response.

• 생명과학회지
• /
• 제18권9호
• /
• pp.1284-1289
• /
• 2008

본 연구에서는 EVOP-factorial system을 활용하여 매실식초의 최적 발효 조건을 찾고자 하였다. 3-7% 사이의 에탄올 농도(r=-0.5166)와 glucose 농도(r=-0.5061)는 10% 유의수준에서 산도에 영향을 미치는 것으로 확인되었다. 24-$33^{\circ}C$의 범위 내에서 발효온도는 매실식초의 산도 증가에 유의적인 영향을 미치지 못하는 것으로 확인되었다(r=0.1082). EVOP- factorial system을 활용하여 얻은 매실식초의 최적 발효조건은 발효 온도: $30^{\circ}C$, 에탄올 농도: 4%, 포도당 농도: 0.2%로 결정되었으며, 최적 조건에서의 산도값은 6.365%로 set 1의 중심점에서 나타난 산도값 5.4%에 비해 1.0%정도 높아졌다. 본 연구결과는 EVOP-factorial design을 이용하여 매실식초의 최적 발효 조건을 확인한 최초의 시도이다.

• Communications for Statistical Applications and Methods
• /
• 제7권3호
• /
• pp.759-766
• /
• 2000

In order to design fractional factorial experiments which include some debarred combinations, we should select defining contrasts so that those combinations are to be excluded. Choi(1999) presented a method of selectign defining contrasts to construct orthogonal 3-level fractional factorial experiments which exclude some debarred combinations. In this paper, we extend Choi's method to general p-level fractional factorial experiments to select defining contrasts which cold exclude some debarred combinations.

• Journal of the Korean Statistical Society
• /
• 제22권2호
• /
• pp.249-258
• /
• 1993

It is well known that design matrix X for any factorial design can be represented by a product $X = TX_o$ where T is replication matrix and $X_o$ is the corresponding balanced design matrix. Since $X_o$ consists of regular arrangement of 0's and 1's, we can easily find the spectral decomposition of $X_o',X_o$. Also using this we propose an efficient algorithm for computing the orthogonal projection matrix for a balanced factorial design.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.133-140
• /
• 2002

The object of this paper is to predict the surface roughness using the experiment equation of surface roughness, which is developed with a full factorial design in turning. $3^3$ full factorial design has been used to study main and interaction effects of main cutting parameters such as cutting speed, feed rate, and depth of cut, on surface roughness. For prediction of surface roughness, the arithmetic average (Ra) is used, and stepwise regression has been used to check the significance of all effects of cutting parameters. Using the result of these, the experimental equation of surface roughness, which consists of significant effects of cutting parameters, has been developed. The coefficient of determination of this equation is 0.9908. And the prediction ability of this equation was verified by additional experiments. The result of that, the coefficient of determination is 0.9718.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.899-903
• /
• 2008

This study was conducted in order to elucidate the optimum conditions for the extraction of clove that can be used to elicit antibacterial activity against Streptococcus mutans using the evolutionary operation (EVOP)-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature of $80^{\circ}C$ ($r=0.7983^{**}$) and in a longer extraction time of 26 hr ($r=0.6867^*$). Antibacterial activity was not effected by differentiation of ethanol concentration in the extraction solvent (r=-0.0683). The maximum antibacterial activity of clove against S. mutans as determined by the EVOP-factorial design technique was obtained at an extraction temperature of $80^{\circ}C$, an extraction time of 26 hr and a 50% ethanol concentration. Furthermore, the population of S. mutans decreased from an initial concentration of 6.850 to 4.195 log CFU/mL in the third set that is more than 2.6 log cycles by EVOP-factorial design technique.

• Journal of the Korean Statistical Society
• /
• 제23권1호
• /
• pp.103-114
• /
• 1994

For a $2 \times 2$ factorial design without the restriction of a linear model or without regard to error terms having homoscedasticity, under the null hypothesis of no interaction we can have the rank transformed F statistic for interaction converge in distribution to a chi-squared random variable with one degree of random if and only if there is only main effect.

• 대한산업공학회지
• /
• 제28권3호
• /
• pp.283-290
• /
• 2002

Two-level fractional factorial designs are widely used when many factors are considered. When two-level fractional factorial designs are used, some effects are confounded with each other. To break the confounding between effects, we can use fractional factorial designs, called fold-over designs, in which certain signs in the design generators are switched. In this paper, optimal fold-over designs with four-level quantitative and two-level factors are presented for (1) the initial designs without curvature effect and (2) those with curvature effect. Optimal fold-over design tables are provided for 8-run, 16-run, and 32-run experiments.

• Journal of Microbiology and Biotechnology
• /
• 제17권11호
• /
• pp.1880-1884
• /
• 2007

This study was conducted to find the optimum extraction condition of Gold-Thread for antibacterial activity against Streptococcus mutans using The evolutionary operation-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature ($R^2=-0.79$) and in a longer extraction time ($R^2=-0.71$). Antibacterial activity was not affected by differentiation of the ethanol concentration in the extraction solvent ($R^2=-0.12$). The maximum antibacterial activity of clove against S. mutans determined by the EVOP-factorial technique was obtained at $80^{\circ}C$ extraction temperature, 26 h extraction time, and 50% ethanol concentration. The population of S. mutans decreased from 6.110 logCFU/ml in the initial set to 4.125 logCFU/ml in the third set.