• 정보관리연구
• /
• 제36권3호
• /
• pp.1-25
• /
• 2005

ISI의 영향계수는 그 범용성에도 불구하고 많은 한계와 가외성을 지니고 있다. 본 연구는 학술지 영향계수의 함의와 가외성을 살펴보고, 국내 대학에서 교수의 연구업적을 평가할 때 학술지에 부여한 점수기준(배점)과 가중치 반영실태를 조사.분석하여 어떤 문제점과 한계가 있는 지를 적시하고, 국내 학술지에 대한 적절한 평가기준을 제안함으로써 ISI 영향계수에 대한 연구업적 평가의 편향성을 극복하는 계기로 삼고자 한다.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.393-400
• /
• 2023

Displacements near crack and stress intensity factor (SIF) are key parameters to solve rock failure issue when using fracture mechanics. In order to study the horizontal displacement and stress intensity factor of the mode I fracture, a series of three-point bending tests of granite specimens with central notch were carried out. The evolution of horizontal displacements of precast notch and crack tip opening displacements (CTOD) were analyzed based on the digital image correlation (DIC) method. Stress intensity factors for three-point bending beams with arbitrary span-to-width ratios(S/W) were calculated by using the WU-Carlsson analytical weight function for edge-crack finite width plate and the analytical solution of un-cracked stress by Filon. The present study provides a high efficient and accurate method for fracture mechanics analysis of the three-point bending granite beams.

• 디지털융복합연구
• /
• 제11권12호
• /
• pp.201-211
• /
• 2013

본 연구는 다양한 가중치 산출방법을 적용하여 각 차원별 가중치 및 고객만족도지수를 비교하고 시사점을 밝혀보고자 한다. 이를 위해 가중치 산출방법을 주관적 방법과 통계적 방법으로 구분하고, 다시 주관적 방법은 고정총합법, 그리고 통계적 방법은 상관분석, 회귀분석, 주성분분석, 요인분석, 구조방정식으로 세분화하였다. 연구결과 주관적 방법과 통계적 방법에 의한 가중치는 서로 차이가 있는 것으로 나타났고, 분석방법에 따른 가중치의 순위는 유사한 패턴으로 구분되었다. 그리고 가중치 산출방법에 따른 각 차원별 가중치는 큰 편차를 보여 차원간의 변별력 및 안정성에 차이를 나타냈다. 마지막으로 다양한 가중치 산출방법에 따른 고객만족도지수는 구조방정식, 회귀분석, 상관분석, 산술평균, 주성분분석, 고정총합법, 요인분석의 순으로 높게 나타났고, 각 방법론에 따른 고객만족도지수는 통계적으로 유의한 차이가 있는 것으로 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권4호
• /
• pp.532-537
• /
• 2005

Increasing of body weight has been one of the important economic factors in the poultry industry. Insulin-like growth factor (IGF)-I is a polypeptide that serves to regulate muscle development and body growth. Moreover, IGF-I is related to feed efficiency. However, there are few studies regarding the regulatory roles of chicken IGF-I/-II compared with that of mammals. Especially, the Korean Native Ogol Chicken (KNOC) has a lean body growth and its body weight is generally lighter than the broiler chicken. Therefore, this study was conducted to investigate associations among serum IGF-I/-II concentration, feed efficiency, and body growth in KNOC. The body weight and feed intake of KNOC were recorded from 20 to 36 weeks at 2 weeks intervals, and blood was taken every 2 weeks. Serum IGF-I/-II were measured by RIA. Chickens were divided into two groups, high and low serum IGF-I concentration. Generally, feed efficiency and growth performance (body weight and weight gain) in the high serum IGF-I group were higher than those of the low group during the experimental period. In particular, the body weight of the IGF-I high group were significantly different from those of the IGF-I low group at 34 and 36 weeks, respectively (p<0.05). Moreover, body weight, weight gain, and feed efficiency had a significant correlation with serum IGF-I at several weeks (p<0.05 and p<0.01). These results show that IGF-I plays an important role in body growth and suggests a possibility that serum IGF-I could be used as a selection marker for body growth in KNOC.

• 한국의류학회지
• /
• 제16권4호
• /
• pp.405-416
• /
• 1992

This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.

• Kyungpook Mathematical Journal
• /
• 제46권3호
• /
• pp.425-431
• /
• 2006

In this paper, by introducing three parameters A, B and ${\lambda}$, and estimating the weight coefficient, we give a new extension of Hardy-Hilbert's inequality with a best constant factor, involving the Beta function. As applications, we consider its equivalent inequality.

• Kyungpook Mathematical Journal
• /
• 제50권2호
• /
• pp.307-314
• /
• 2010

By introducing a homogeneous kernel of 0-degree with an independent parameter and estimating the weight coefficient, a bilateral form of the Hilbert-type series inequality with a best constant factor is established.

• Kyungpook Mathematical Journal
• /
• 제49권2호
• /
• pp.393-401
• /
• 2009

By introducing a parameter and estimating the weight coefficient, we obtain a new Hilbert-type integral inequality with a composite kernel and a best constant factor. As applications, we also consider its equivalent forms and reverse forms.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.643-660
• /
• 2013

In the present work, the capacity ratings of steel truss bridges have been carried out incorporating dynamic effect of moving vehicles and its accumulating effect as fatigue. Further, corrosion in the steel members has been taken into account to examine the rating factor. Dynamic effect has been considered in the rating procedure making use of impact factors obtained from simulation studies as well as from codal guidelines. A steel truss bridge has been considered to illustrate the approach. Two levels of capacity ratings- the upper load level capacity rating (called operating rating) and the lower load level capacity rating (called inventory rating) were found out using Load and Resistance Factor Design (LRFD) method and a proposal has been made which incorporates fatigue in the rating formula. Random nature of corrosion on the steel member has been taken into account in the rating by considering reduced member strength. Partial safety factor for each truss member has been obtained from the fatigue reliability index considering random variables on the fatigue parameters, traffic growth rate and accumulated number of stress cycle using appropriate probability density function. The bridge has been modeled using Finite Element software. Regressions of rating factor versus vehicle gross weight have been obtained. Results show that rating factor decreases when the impact factor other than those in the codal provisions are considered. The consideration of fatigue and member corrosion gives a lower value of rating factor compared to those when both the effects are ignored. In addition to this, the study reveals that rating factor decreases when the vehicle gross weight is increased.

• 한국농공학회논문집
• /
• 제46권2호
• /
• pp.93-103
• /
• 2004

In trench excavation, essential factor of earth-retaining temporary work structure should be easy taking to pieces and movement, and dead weight must be less. This paper studies about the light weight material and application as earth-retaining structure to prevent the slope failure of sand soil ground caused by the variation of groundwater level in trench excavation. That is, light weight earth-retaining structural is proposed and a simulation with FEM on application of proposed structural in sandy soil is presented. The results are summarized as follows; (1) The study proposed FRP H-shaped pannel for the light weight member, and also presented estimation method about stability. (2) Mechanical property (bending moment, shear force, axial force, displacement) were changed according to groundwater level, but these values had been within enough safety rate and allowable stress. Therefore, proposed light weight pannel with FRP is available for bracing structure in trench excavation.