• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.31-34
• /
• 2007

In this study, in order to develop multilayer ceramics vibrator for ultrasonic nozzle, PMN-PNN-PZT ceramics were fabricated using $Li_{2}CO_{3}-Na_{2}_CO_{3}$ as sintering aids and their piezoelectric and dielectric characteristics were investigated according to the amount of PbO. With increasing PbO contents, secondary phases were increased and phase structure was changed from tetragonal structure to rhombohedral structure and also electromechanical coupling factor was linearly decreased. At the composition ceramics with the sintering temperature of $870^{\circ}C$ and 1 mol% excess PbO, density, electromechanical coupling factor, dielectric constant, piezoelectric d constant and mechanical quality factor showed the optimum value of $7.879\;g/cm^{3}$, 0.55, 1149, 328 pC/N, 1224, respectively for multilayer ceramics vibrator application for ultrasonic nozzle.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.57-64
• /
• 2000

For composing the structure model of national maritime power system by system structural modeling, in this study, the 50 basic factors are selected by survey of the extensive and through literatures on maritime, sea, maritime power and sea power. And the basic factors are classified into 36 component factors by cluster method. The 9 attributes are extracted by the application of the principle component analysis method, one of the factor analysis method in system engineering, to component factors. In this study, we define the attributes composing the national maritime power system by integrating the result of this study and existed our studies relating to this topic. Which are showed in Table 2. and we show the structure model of national maritime power system in Fig. 3. In Table 2, the 9 attributes are as follows : the fundamental power of maritime, shipping and port power, naval power, fishing power, shipbuilding power, the power of ocean research and development, dependency on seaborne trade, the protection power of ocean environment and the will and inclination of govemment. Also, in the case of evaluating this system, we conform the importance of considering the interactions among the attributes which have strong interactions in structure model of national maritime power system.

• Communications for Statistical Applications and Methods
• /
• 제28권3호
• /
• pp.233-250
• /
• 2021

This paper studies if the accuracies of mortality models (LC model vs. 4-parametric model) are aggravated if a mortality structure changes due to the impact of COVID-19. LC model (LCM) uses dimension reduction for fitting to the log mortality matrix so that the performance of the dimension reduction method may not be good when the matrix structure changes. On the other hand, 4-parametric factor model (4-PFM) is designed to use factors for fitting to log mortality data by age groups so that it would be less affected by the change of the mortality structure. In fact, the forecast accuracies of LCM are better than those of 4-PFM when life-tables are used whereas those of 4-PFM are better when the mortality structure changes. Thus this result shows that 4-PFM is more reliable in performance to the structural changes of the mortality. To support the accuracy changes of LCM the functional aspect is explained by computing eigenvalues produced by singular vector decomposition

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2007년도 SMT/PCB 기술세미나
• /
• pp.37-47
• /
• 2007

Factor : Structure Metal pad & SMO size Board level TC test : - Large SMO size better Board level Drop test : - Large SMO size better Factor : Structure Substrate thickness Board level TC test : - Thick substrate better Board level Drop test : - Substrate thickness is not a significant factor for drop test Factor : Material Solder alloy Board level TC test : - Not so big differences over Pb-free solder and NiAu, OSP finish Board level Drop test : - Ni/Au+SAC105, CuOSP+LF35 are better Factor : Material Pad finish Board level TC test : - NiAu/NiAu is best Board livel Drop test : - CuOSP is best Factor : Material Underfill Board level TC test - Several underfills (reworkable) are passed TCG x500 cycles Board level Drop test : - Underfill lots have better performance than non-underfill lots Factor : Process Multiple reflow Board level TC test : - Multiple reflow is not a significant actor for TC test Board level Drop test : N/A Factor : Process Peak temp Board level TC test : - Higher peak temperature is worse than STD Board level Drop test : N/A Factor : Process Stack method Board level TC test : - No big difference between pre-stack and SMT stack Board level Drop test : - Flux dipping is better than paste dipping but failure rate is more faster

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.210-218
• /
• 2009

The Purpose of this study is to demonstrate Storytelling as an effective device for Fashion Design by establishing relationship between Fashion Design Process and Storytelling. Through researching a social background and a concept of storytelling, found that story used interactively is a powerful tool for attention, understanding and change in both individuals and communities. Analysed the elements and the structure of storytelling and Fashion Design Process, by researching preceding researches. Therefore, we proposed a new four elements -text factor, visual factor, audio factor and virtual factor- and four steps (1)exploring stories, (2)planning a story, (3)building the story, (4)do storytelling- of storytelling and four steps-(1)gathering and analysing informations, (2)building a concept, (3)planning and developing a design, (4)do evaluation and make decision- of fashion design process. Through comparative analysis, we found a closeness between two structures, a use of common factors and also found characteristics to be considered in each stage. In the first stage, we found text, visual and audio factor as common factors. In the second stage, we suggested text and visual factor as common factors and also suggested clarity, realism and probability as characteristics. In the third stage, we found text, visual and virtual factor and also found dynamism, immersion and continuity. In the last stage, we suggested text, visual, virtual and audio factor and also suggested presence and interactivity as characteristics.

• 한국전산구조공학회논문집
• /
• 제28권3호
• /
• pp.241-248
• /
• 2015

원자력발전소에는 전력생산과 안전과 관련된 수많은 기기들이 존재하고 있다. 기본적으로 원자력발전소의 구조물과 기기는 지진시 탄성거동올 목표로 안전율을 매우 높게 적용하여 설계해 왔다. 그러나 최근 발생한 지진의 규모가 증가함에 따라 설계수준을 초과한 지진에 대한 기기의 안전성을 재평가할 필요가 있다. 본 연구에서는 구조물의 비선형 거동에 의한 층응답을 분석하였고, 비선형해석에 의한 구조물의 비탄성구조응답계수를 재평가하였다. 기기의 지진취약도 평가시 구조물의 비탄성구조응답이 어떤 영향을 주는지 분석하기 위하여 재평가된 구조물의 비탄성구조응답계수와 기존에 사용되어온 구조물 비탄성구조응답계수를 적용하여 지진취약도 평가를 수행하였다. 해석결과에 따르면 비탄성구조응답계수는 기기의 고유진동수, 기기의 위치 그리고 구조물의 동특성에 따라 영향을 받는 것으로 나타났다.

• 생물정신의학
• /
• 제26권2호
• /
• pp.71-78
• /
• 2019

Objectives Suicide is a complex phenomenon not only caused by the individual's mental illness and economic situation, but also occurred in sociocultural contexts and relationships around the individual. Therefore, the attitudes, which include collective norms, thoughts and feelings of a population, toward suicide play a fundamental role in the prevention of suicide. Factor structure of Attitudes Toward Suicide (ATTS), developed by Renberg, is also various in different sociocultural contexts. This is the first study to investigate factor structure of ATTS along with nationwide sample of Korean adults. Methods This study analyzed the factor structure and reliability of ATTS in 1500 regionally stratified Korean adults. Exploratory factor analysis was performed by using principal axis factoring and varimax rotation. Results The selection of 33 ATTS items based on internal consistency and communality was conducted. Five factors were analyzed, which were named 'Good reason,' 'Negative gaze,' 'Predictability,' 'Means of escape,' and 'Common secret,' respectively. Explained total variance was 41.94%, and the internal consistency ranged from 0.516 to 0.740. Conclusions Each of the five factors contains different semantic dimensions. Consistent with previous studies, factors containing permissive attitude toward suicide was high in those with history of suicidal thought and of suicide attempt. It is notable that the 'Good reason' showed higher score in elderly. This may be related to socioeconomic or physical adversities which have been considered the major cause of suicide in elderly.

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.165-170
• /
• 2019

The structural damage caused by earthquake to the upper structure of seismic base-isolated system can be suppressed effectively because it is designed to concentrate the input energy on the seismic isolation floor. Further, the response acceleration of seismic base-isolated system can be greatly reduced compared to the seismic structure because of the long period, which means that the design shear force of the seismic base-isolated system can be reduced appropriately. However, when the design shear force is determined to be reduced, the design stiffness will decrease, and the response acceleration will increase oppositely. Therefore, for finding the extent to which the design shear force of the upper structure can be reduced, this paper considered the seismic base-isolated structure as the analytical model and proposed the design shear force reduction factor of the base-isolated structure through the dynamic response analysis, while considering the decrement effect of response acceleration. The research result shows that the response acceleration of the isolated the upper structure can be reduced by 50%~70% of the seismic structure under the same design conditions, and the design shear force can be reduced by up to 40%. By increasing the design stiffness over to 1.8 times of the original design value, the design shear force can be reduced to the same extent as the response acceleration can be reduced compared to the seismic structure.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.605-607
• /
• 2011

A Study on the flow-structure characteristics of a 3/2 way pneumatic valve is essential for optimizing the performance of ship engines. It is important for the valve to have desirable safety factor am reduced weight from the safety and economic point of view. In this study, we capture flow-structure characteristics of 3/2 way pneumatic valve. This is optimized based on the proper design criteria. The air at a pressure of 30 bar is the working fluid which is made to fill in the tack in short time. This time is defined as the filling time. The flow and structure analysis is performed for three cases under maximum stress and safety factor. In optimum design, considering the flow-structure characteristics, we model twenty seven cases by using DOE(design of experiments) method Here, analysis for each cases is performed and then metamodels are created We obtain optimized parameters and then analysis is repeated to compare with the initial model. Finally, the feasibility of the optimum design is verified.

• 한국비블리아학회지
• /
• 제23권1호
• /
• pp.215-234
• /
• 2012

본 연구는 도서관 서비스 품질이 이용자 만족도에 미치는 영향력의 비대칭성 여부를 실증적으로 검증해보고 고객만족도 증진을 위한 개선전략을 도출하는 것을 목적으로 한다. 비대칭성 검증은 Kano의 서비스 3요인 이론을 기반으로 수행하였고, 자료의 분석을 위해 다중회귀분석이 실시되었다. 분석결과 총 22개의 품질 속성 중에서 기본요인(8개), 성과요인(12개), 감동요인(2개)이 도출되었다.