• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권2호
• /
• pp.261-268
• /
• 1996

An experimental study was performed to evaluate the efficacy of nerve growth factor(NGF) on inferior alveolar nerve in a rabbit model. In 20 New Zealand white rabbits, 14mm of bilat eral alveolar nerve were resected and the defects were repaired with the 17mm silicone conduits. In group I, 5mm autologous nerve segment were located centrally in the left side after tubulization and NGF solution(Sigma chemical 0.1 mg/mL) was instilled into each conduit. In group II, nerve repair modality was the same but no NGF solution was instilled into the conduits. On 2 months and 6 months postoperatively, the results were evaluated by clinical and hist omorphometric assessment. The result was that autologous nerve segment group show the best nerve regeneration effect and NGF instilled group the worst.

• 한국의류학회지
• /
• 제31권9_10
• /
• pp.1396-1407
• /
• 2007

The purpose of this study was to identify the effect of clothing involvement, store and brand loyalty orientation on the information search behavior. The study subjects comprised 298 females living in Seoul and Kyung-gi area. The data were analyzed with factor analysis, regression, cluster analysis, ANOVA and correlation analysis. Clothing involvement and information search behavior consisted of various factors. Clothing involvement, store and brand loyalty influenced information search behavior. Fashion and clothing involvement was the most important factor which influenced all loyalty and information search behavior(i.e. brand and store loyalty, personal and nonpersonal information search behavior). According to store and brand loyalty factors, female consumers classified into three groups : low loyalty, brand loyalty and store loyalty group. Three groups showed different clothing involvement, information search, clothing purchasing behavior and demographic variables. Therefore, loyalty orientation is the important factor which can describe the consumer behavior more effectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.795-798
• /
• 2002

In this investigation, experimental attempts were made to observe and determine the variations in elastic of the PVC depending on the amounts of MBS added to the mixture, PVC/MBS, and also on the thicknesses of the specimens. An acoustic resonance technique was used for the tests in this investigation. It serves as a method to characterize properties of materials set in vibrational motions, which is initiated by low level stresses generated by externally supplied acoustic energy. Substantial variations were observed in the test results with the addition of the MBS to the PVC. It was found that the magnitudes of elastic constants decrease when MBS rubber was added in the range up to 9 phr and the shape factor effect in torsional vibration is more significant than the shape factor effect in flexural vibration.

• ETRI Journal
• /
• 제33권1호
• /
• pp.110-120
• /
• 2011

As information technology rapidly develops and the period required to enter new technology shortens, there emerges a wide variety of alternatives for consumers. When there are many alternatives in the market, users choose after making comparisons. This process of making comparisons is our research key. We established a research model to find a mixed effect that comes from new attitudes to technology adoption and alternative's continuous usage intention. The effect is revealed through a relative attractiveness (RA) factor to explain a user's process of comparison. We empirically test our research model in the new media services, such as mobile TV, web TV, and mobile IPTV. According to our research results, a continuous usage intention of an existing technology is an important factor to explain the adoption of a new technology. So, the contribution of our research is in finding a role for the RA factor in research in new technology adoption.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.250-264
• /
• 1998

The purpose of the thesis is to develop simulation program for forecasting of optical connector. So we can achieve the time and the money saving for making the optical connector. Optical performance (insertion loss) of optical connector mainly relies on 3 misalignment factors-ferrule factor due to mis-manufacture from design, auto-centering effect that is fiber behavior phenomena between hole and fiber, fiber misalignment factor. Simulation use experimental data with auto-centering effect and fiber factor and use pseudo data with ferrule through random number generation because it is developing stage. In this study we a, pp.y kernel density estimation method with experimental data in order to know whether it belong to or not specific parametric distribution family. And we simulate to forecast insertion loss of optical multifiber connector under specific design model using nonparametric bootstrap resampling data and parametric pseudo samples from uniform distribution. We obtain the tolerance specifications of misalignment factors satisfying not exceed in maximum 1.0dB and choose optimal hole diameter.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2002년도 춘계학술발표대회 발표논문초록집
• /
• pp.18-18
• /
• 2002

This study was to investigate the effect of neurotrophic factors on neural cell differentiation in vitro derived from human embryonic stem (hES, MB03) cells. For neural progenitor cell formation derived from hES cells, we produced embryoid bodies (EB: for 5 days, without mitogen) from hES cells and then neurospheres (for 7 - 10 days, 20 ng/㎖ of bFGF added N2 medium) from EB. And then finally for the differentiation into mature neuron cells, neural progenitor cells were cultured in ⅰ) N2 medium (without bFGF), ⅱ) N2 supplemented with brain derived neurotrophic factor (BDNF, 5ng/㎖) or ⅲ) N2 supplemented with platelet derived growth factor-bb (PDGF-bb, 20ng/㎖) for 2 weeks. (omitted)

• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.773-787
• /
• 2003

Principal component analysis, factor analysis and cluster analysis have been performed to analyze the relationship between air pollutants and meteorological variables measured in 1999 in Seoul. In principal analysis, the first principal has been shown the contrast effect between $O_3$ and the other pollutants, the second principal has been shown the contrast effect between CO, $SO_2$, $NO_2$ and $O_3$, PM10, TSP. In factor analysis, the first factor has been found as PM10, TSP, $NO_2$ concentrations which are related with suspended particulates. As a result of cluster analysis, three clusters respectively have represented different air pollution levels, seasonal characteristics of air pollutants and meteorological situations.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.109-117
• /
• 2004

The objective of this study is to investigate the effect of the spray characteristics on the etching characteristics for the optimization of etching process in the micro fabrication industry. The etching characteristics such as etching rate and etching factor were investigated under different etching conditions. To compare with the etching characteristic, the spray characteristics such as droplet size and velocity were measured by PDA system. The etching rate was increased in case of high spray pressure and in the region of spray center. The etching factor was increased with decrease in the distance from nozzle tip and increase in the etchant temperature. It was found that the spray characteristics were correlated with the etching characteristics.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.878-883
• /
• 2003

To modify some problems of ACI shear provisions, ultimate shear strength equation considering size effect and arch action to compute shear strength in high-strength concrete beams without stirrups is presented in this research. Three basic equations, namely size reduction factor, rho factor, and arch action factor, are derived from crack band model of fracture mechanics, analysis of previous some shear equations for longitudinal reinforcement ratio, and concrete strut described as linear function in deep beams. Constants of basic equations are determined using statistical analysis of previous shear testing data. To verify proposed shear equation for each variable, namely d, , ρ, f/sub c/' and aid, about 250 experimental data are used and proposed shear equation is compared with ACI 318-99 code, CEB-FIP Model code, Kim & Park's equation and Zsutty's equation. While proposed shear equation is simpler than other shear equations, it is shown to be economical predictions and reasonable safety margin. Hence proposed shear strength equation is expected to be applied to practice shear design.

• 대한가정학회지
• /
• 제40권5호
• /
• pp.225-235
• /
• 2002

The purpose of this research is to delineate the effect of maternal variables of the verbal abuse. Such variables as the mother's age, her education level, and maternal parenting stress have been chosen for the analysis. The sample subject were 659 pairs of fifth/sixth grade of elementary school and firs/second grade of middle school, and their mothers. The major findings of the research are as follows: first, looking at the correlation between the mother's age/education level and the verbal abuse, the verbal abuse factor shows difference correlating to the mother's age/education level. Second, looking at the correlation between the material parenting stress level and the verbal abuse, the verbal abuse factor shows difference correlating to the maternal parenting stress level. Third, the result of multiple regression analysis on the effects of the maternal variables to the verbal abuse indicates that material parenting stress is the significant contributing factor. All in all, the maternal variables account for 9% of the verbal abuse score.